FreeLink for the MIPSel (LS2) LinkStation
From the Forums:
This has been packaged up as a image.dat suitable for flashing.
Info about this
- image.dat password = 1NIf_2yUOlRDpYZUVNqboRpMBoZwT4PzoUvOPUp6l (As required by the firmware updater)
- It has a static IP assigned to 192.168.11.150
- root password = "freelink"
- ssh enabled (no telnet as default)
avr_evtd ver 1.61 - Fully functioning including s/w shutdown/restart, emergency telnet on port 1234 (just two clicks of the reset button).
Note: The operation of the reset button for the avr_evtd daemon has changed. This now, with proper setup, allows the user to enter EM-Mode. Please refer to http://www.linkstationwiki.net/index.php?title=AVR_watch-dog_daemon_for_Linkstation for more information.
Good luck all!