Frequently Asked Questions

From NAS-Central Buffalo - The Linkstation Wiki
Revision as of 15:17, 1 August 2006 by Dtaylor (Talk)

Jump to: navigation, search

How do I install the hard drive in my kuro and fully assemble my kuro?

Read the instructions that came with your Kuro. They are also available here

Help, I can't ping or login to my new Kurobox. The power light is on. The link light is on. The other lights are off.

1. The fallback IP address for the Kuro is If your computer is not on the same subnet (first three numbers don't match) you will not be able to communicate with your kuro. If only the first 2 numbers match change the subnet mask on your computer to If only the first number matches change the subnet mask to Be sure to change your subnet mask back to its original setting after you have setup your Kuro.

2. If all else fails, plug your kuro directly into your computer (you will need a crossover cable for the standard Kuro). Change the ip address of your computer to and change the subnet mask to You should now be able to telnet to your Kuro at and install your system.