Frequently Asked Questions

From NAS-Central Buffalo - The Linkstation Wiki
Revision as of 01:28, 2 August 2006 by Jkk (Talk) (/* The Kuro Standard has built in autoswitching x-over detection, as well as a switch on the back (which is useless?))

Jump to: navigation, search

How do I install the hard drive in my kuro and fully assemble my kuro?

Read the instructions that came with your Kuro. They are also available here

Help, I can't ping or login to my new Kuro Box. The power light is on. The link light is on. The other lights are off.

1. The fallback IP address for the Kuro Box is If your computer is not on the same subnet (first three numbers don't match) you will not be able to communicate with your Kuro Box. If only the first 2 numbers match change the subnet mask on your computer to If only the first number matches change the subnet mask to Be sure to change your subnet mask back to its original setting after you have setup your Kuro Box.

2. If all else fails, connect the Kuro Box directly to your computer. Change the IP address of your computer to and change your subnet mask to You should now be able to telnet directly into your Kuro Box at and install your system.