Difference between revisions of "Hardware LEDs"
m (HDLAN --> Kurobox HG)
m (hard drive link)
|Line 13:||Line 13:|
If ppc_uartd not for some reason (started late due to hardware/software issues), blinkingfive minutes DIAG LED 6 times (hard ) the box .
Revision as of 08:59, 9 July 2006
Power LED (green)
|on||Normal: Timed shutdown timer has not been activated|
|Blink||At bootup, prior to ppc_uartd starting, Just prior to flash memory being updated|
|Blink Slowly||Timeed shutdown has been established|
If ppc_uartd does not start for some reason (or started late due to hardware/software issues), the Power LED will continue blinking. After five minutes the DIAG LED will continuously blink 6 times (hard drive failure) and then shut the box down.
|blue||1000BASE-T (Kurobox HG only)|
DISK FULL LED (red)
|blink||Writing to flash memory|
DIAG LED (red)
|3 times blink||Partition warning: /dev/hda3 is not mounted on /mnt. You can ignore it.|
|4 times blink||Problem with the cooling fan - probably rotor jammed.|
|5 times blink||Problem with the flash memory*|
|6 times blink||Hard drive not found. Or ppc_uartd is not running.|
|7 times blink||Problem with the RAM/LAN/HDD controller.|
|blink many times||Writing to flash memory.|
* It may be possible to recover from a flash memory error by pulling out power cord and trying again after one night.
Table copied from http://www.yamasita.jp/linkstation.en/led.html with minor rewording. nobuakiy helped with the translation.
Notes Users have reported problems when the drive already has a Linux partition on it - the diag light blinks 6 times. The solution appears to be to simply to reformat the drive.