Revision as of 00:52, 13 January 2013

Identify the Board of your Box

TIP

Please document here if you succeed gathering the information for your board.

Tested on a LS-WVL with firmware 1.52

You need shell access to the machine.

   $ dmesg | grep -i board
   Marvell Development Board (LSP Version KW_LSP_5.1.3_patch13)-- MVLSWV  Soc: 88F6282 A0 LE

For uBoot, your config will be `buffalo_mvlswvl_6282_config`.

Tested on Debian Squeeze with a kernel 2.6.31 from stock firmware 1.52

 # cat /proc/buffalo/board_info 
 BoardId=82
 BoardName=MVLSWV

For uBoot do a

grep -i MVLSWV Makefile

This will hopefully give you a single entry which ends with the board-id like `buffalo_mvlswvl_6282_config`.

@@ Line 3: / Line 3: @@
 {{tip|Please document here if you succeed gathering the information for your board.}}
-== LS-VL, LS-WVL, LS-QVL ==
+== On stock firmware ==
-* On stock firmware (tested with 1.52):
+Tested on a LS-WVL with firmware 1.52
- You need shell access to the machine.
+You need shell access to the machine.
      $ dmesg | grep -i board
      Marvell Development Board (LSP Version KW_LSP_5.1.3_patch13)-- MVLSWV  Soc: 88F6282 A0 LE
-For uBoot, this will be buffalo_mvlswvl_6282_config
+For uBoot, your config will be `buffalo_mvlswvl_6282_config`.
-* On a debianized system:
+== On a debianized system ==
+Tested on Debian Squeeze with a kernel 2.6.31 from stock firmware 1.52
    # cat /proc/buffalo/board_info
    BoardId=82
    BoardName=MVLSWV
+For uBoot do a
+ grep -i MVLSWV Makefile
+This will hopefully give you a single entry which ends with the board-id like `buffalo_mvlswvl_6282_config`.