Identify your Board
From NAS-Central Buffalo - The Linkstation Wiki
(Difference between revisions)
Lsuser1985 (Talk | contribs) |
Lsuser1985 (Talk | contribs) m |
||
| Line 3: | Line 3: | ||
{{tip|Please document here if you succeed gathering the information for your board.}} | {{tip|Please document here if you succeed gathering the information for your board.}} | ||
| - | == On | + | == On Stock Firmware == |
Tested on a LS-WVL with firmware 1.52 | Tested on a LS-WVL with firmware 1.52 | ||
| Line 14: | Line 14: | ||
For uBoot, your config will be `buffalo_mvlswvl_6282_config`. | For uBoot, your config will be `buffalo_mvlswvl_6282_config`. | ||
| - | == On a | + | == On a Debianized System == |
| - | Tested on Debian Squeeze with a kernel 2.6.31 from stock firmware 1.52 | + | Tested on Debian 6 ("Squeeze") with a kernel 2.6.31 from stock firmware 1.52 |
# cat /proc/buffalo/board_info | # cat /proc/buffalo/board_info | ||
| Line 22: | Line 22: | ||
BoardName=MVLSWV | BoardName=MVLSWV | ||
| - | + | As you can see, the BoardId is only the last two digits. So for uBoot, search the makefile for your board-name, e.g | |
grep -i MVLSWV Makefile | grep -i MVLSWV Makefile | ||
This will hopefully give you a single entry which ends with the board-id like `buffalo_mvlswvl_6282_config`. | This will hopefully give you a single entry which ends with the board-id like `buffalo_mvlswvl_6282_config`. | ||
Revision as of 10:59, 13 January 2013
Identify the Board of your Box
| Please document here if you succeed gathering the information for your board. |
On Stock Firmware
Tested on a LS-WVL with firmware 1.52
You need shell access to the machine.
$ dmesg | grep -i board Marvell Development Board (LSP Version KW_LSP_5.1.3_patch13)-- MVLSWV Soc: 88F6282 A0 LE
For uBoot, your config will be `buffalo_mvlswvl_6282_config`.
On a Debianized System
Tested on Debian 6 ("Squeeze") with a kernel 2.6.31 from stock firmware 1.52
# cat /proc/buffalo/board_info BoardId=82 BoardName=MVLSWV
As you can see, the BoardId is only the last two digits. So for uBoot, search the makefile for your board-name, e.g
grep -i MVLSWV Makefile
This will hopefully give you a single entry which ends with the board-id like `buffalo_mvlswvl_6282_config`.
