Difference between revisions of "Identify your Board"

From NAS-Central Buffalo - The Linkstation Wiki
Jump to: navigation, search
(Created page with "= Identify the Board of your Box = {{tip|Please document here if you succeed gathering the information for your board.}} == LS-VL, LS-WVL, LS-QVL == * On stock firmware (teste…")
 
m (Identify the Board of your Box: change formatting)
 
(3 intermediate revisions by one user not shown)
Line 1: Line 1:
= Identify the Board of your Box =
+
'''Identify the Board of your Box'''
  
 
{{tip|Please document here if you succeed gathering the information for your board.}}
 
{{tip|Please document here if you succeed gathering the information for your board.}}
  
== LS-VL, LS-WVL, LS-QVL ==
+
== On Stock Firmware ==
  
* On stock firmware (tested with 1.52):
+
Tested on a LS-WVL with firmware 1.52
You need shell access to the machine.
+
 
 +
You need shell access to the machine.
  
 
     $ dmesg | grep -i board
 
     $ dmesg | grep -i board
 
     Marvell Development Board (LSP Version KW_LSP_5.1.3_patch13)-- MVLSWV  Soc: 88F6282 A0 LE
 
     Marvell Development Board (LSP Version KW_LSP_5.1.3_patch13)-- MVLSWV  Soc: 88F6282 A0 LE
  
For uBoot, this will be buffalo_mvlswvl_6282_config
+
For uBoot, your config will be `buffalo_mvlswvl_6282_config`.
  
* On a debianized system:
+
== On a Debianized System ==
  
 +
Tested on Debian 6 ("Squeeze") with a kernel 2.6.31 from stock firmware 1.52
 +
 +
Example:
 
   # cat /proc/buffalo/board_info  
 
   # cat /proc/buffalo/board_info  
 
   BoardId=82
 
   BoardId=82
 
   BoardName=MVLSWV
 
   BoardName=MVLSWV
 +
  # cat /proc/soc_type | head -n 2
 +
  MV88F6282 Rev 0
 +
  L2 Enabled
 +
 +
The last two digits from the ''BoardId'' should match the end of the board-type from the first line of the second command. Here it is ''82'' and ''MV88F6282''.
 +
So for uBoot, search the ''Makefile'' for your board-name, e.g
 +
grep -i MVLSWV Makefile
 +
This will hopefully gives you a single entry containing your board-type and ending with the board-id, e.g. ''buffalo_''mvlswvl''_''6282''_config''.
  
  

Latest revision as of 22:25, 19 January 2013

Identify the Board of your Box

Tip.png
TIP

Please document here if you succeed gathering the information for your board.

On Stock Firmware

Tested on a LS-WVL with firmware 1.52

You need shell access to the machine.

   $ dmesg | grep -i board
   Marvell Development Board (LSP Version KW_LSP_5.1.3_patch13)-- MVLSWV  Soc: 88F6282 A0 LE

For uBoot, your config will be `buffalo_mvlswvl_6282_config`.

On a Debianized System

Tested on Debian 6 ("Squeeze") with a kernel 2.6.31 from stock firmware 1.52

Example:

 # cat /proc/buffalo/board_info 
 BoardId=82
 BoardName=MVLSWV
 # cat /proc/soc_type | head -n 2
 MV88F6282 Rev 0
 L2 Enabled

The last two digits from the BoardId should match the end of the board-type from the first line of the second command. Here it is 82 and MV88F6282. So for uBoot, search the Makefile for your board-name, e.g

grep -i MVLSWV Makefile

This will hopefully gives you a single entry containing your board-type and ending with the board-id, e.g. buffalo_mvlswvl_6282_config.