Identify your Board
From NAS-Central Buffalo - The Linkstation Wiki
(Difference between revisions)
Lsuser1985 (Talk | contribs)
(Created page with "= Identify the Board of your Box = {{tip|Please document here if you succeed gathering the information for your board.}} == LS-VL, LS-WVL, LS-QVL == * On stock firmware (teste…")
Newer edit →
(Created page with "= Identify the Board of your Box = {{tip|Please document here if you succeed gathering the information for your board.}} == LS-VL, LS-WVL, LS-QVL == * On stock firmware (teste…")
Newer edit →
Revision as of 00:44, 13 January 2013
Identify the Board of your Box
| Please document here if you succeed gathering the information for your board. |
LS-VL, LS-WVL, LS-QVL
- On stock firmware (tested with 1.52):
You need shell access to the machine.
$ dmesg | grep -i board Marvell Development Board (LSP Version KW_LSP_5.1.3_patch13)-- MVLSWV Soc: 88F6282 A0 LE
For uBoot, this will be buffalo_mvlswvl_6282_config
- On a debianized system:
# cat /proc/buffalo/board_info BoardId=82 BoardName=MVLSWV
