Incremental Update OpenLink 0.5x 0.73b

From NAS-Central Buffalo - The Linkstation Wiki
Revision as of 12:05, 21 October 2006 by 85.124.221.56 (Talk)

Jump to: navigation, search

This script should update your OpenLink 0.5x to 0.73b.

This script updates Openlink for all ppc-boxes to 0.73b. After that all boxes are in the same state It is planned to enhance this script to support the LS2 (mips) also.

Using the Script

cd /tmp 
mkdir update 
cd update 
wget http://downloads.linkstationwiki.net/snapshots/update-ppc-OL-0_5x-0_73b_v6.tar.gz 
tar -xzvf update-ppc-OL-0_5x-0_73b_v6.tar.gz 
./update_ppc_OL_0.5x-0.73b.sh

Script Source

Look at the talk-page if you want to have a look at the source.

Forum Thread

Incremental update for OpenLink 0.5x -> 0.73b (LS1/HG/HS) available

Change Log of the script

Incremental Update OpenLink 0.5x 0.73b

  • v7: added /bin/su to the update-package, added note about enabling telnet before using the script
  • v6: added 2 missing busybox links for /usr/bin/[ & /usr/bin/[[
  • v5: added the removal of the unnecessary dropbear-stuff....dropbear was replaced by OpenSSH...
  • v4: added missing busybox-binary to the update-package
  • v3: added /etc/ld.so.conf (/opt/lib) & /etc/profile (PATH to /opt/bin & /opt/sbin) to the update-tarball
    • changed links in /www/cgi-bin4/applaunch.cgi to be relative and removed the unnecessary perl stuff
  • v2: disabled first startup script which is only needed if complete image is reflashed and which caused a 6 times flash
  • v1: initial release