Difference between revisions of "Information/MIPSelAVR"

From NAS-Central Buffalo - The Linkstation Wiki
Jump to: navigation, search
Line 1: Line 1:
''<font color=red><small>
''<font color=red><small>
This article  
This article  

Revision as of 01:59, 21 July 2006

This article Based on work by naxalite, wth, frontalot, and noName. Originally by frontalot. at Linkstationwiki.org

Nuvola apps important.png 

Some of these commands have not yet been tested on the mipsel-hdhlan LinkStation. Please report any differences

The AVR controls much of the LinkStation hardware, including the power button and LED indicator. It is controlled by the commands sent to /dev/ttyS0. To send commands to the AVR:

echo -n "commands" > /dev/ttyS0
Command Action/Code
\30\30\30\30 Stops smbd and atalkd if /dev/hda3 is not mounted to /mnt. Sent by /www/script/melsub_diskcheck.sh.
[[[[ Starts slowly blinking power LED (sleep).
]]]] High-speed cooling fan rotation.
\\\\ Low-speed cooling fan rotation.
>>>> Unknown. Sent by mc_ctld on boot.
AAAA Unknown. Sent by mc_ctld on boot.
CCCC Sent by shutdown -r now (reboot).
EEEE Sent by shutdown -h now (halt).
FFFF Unknown. Sent by mc_ctld on boot.
JJJJ Unknown. Sent by mc_ctld on boot.
KKKK Unknown. Sent by mc_ctld on boot.
QQQQ Unknown. Sent by mc_ctld on set timer.
RRRR End of clear flash memory.
SSSS Start of clear flash memory and /www/script/melsub_init.sh. Sent by /www/script/melsub_flash.sh.
TTTT Flash memory update completed (stops blinking power, disk full, and diagnostic LEDs).
UUUU Flash memory update started (starts blinking power, disk full, and diagnostic LEDs).
VVVV Turns off disk full LED.
WWWW Turns on disk full LED.
XXXX Stops blinking disk full LED.
YYYY Starts blinking disk full LED.
ZZZZ Stops slowly blinking power LED. Sent by mc_ctld.
gggg Diagnostic LED blinks 3 times and system shutdown (partition error).
iiii Diagnostic LED blinks 4 times and system shutdown (cooling fan error).
kkkk Diagnostic LED blinks 5 times and system powers off (flash memory error).
mmmm Diagnostic LED blinks 6 times and system shutdown (hard drive or mc_ctld error).
oooo Diagnostic LED blinks 7 times and system shutdown (RAM, NIC, or HDD controller error).

Most of this information courtesy of http://www.yamasita.jp/linkstation.en/index.html.