Difference between revisions of "JTAG Software/HairyDairyMaid"

From NAS-Central Buffalo - The Linkstation Wiki
Jump to: navigation, search
(New page: == HairyDariyMaid == HairyDairyMaid is a simple flash programmer utility that was originally written to debrick a Linksys WRT54G. As near as I can tell, the home page is http://downloads...)
 
m (Board Support)
 
(One intermediate revision by one user not shown)
Line 14: Line 14:
  
 
It was originally written for WRT, but the flash chips may use the same interface.
 
It was originally written for WRT, but the flash chips may use the same interface.
 +
 +
I suspect it may work only for MIPS hardware (e.g. LS2)
  
 
== Discussion / Examples ==
 
== Discussion / Examples ==
  
 
* [[Hardware_Hacks_for_the_LS2#HairyDairyMaid_.28did_work.29]] - used HDM on the LS2 (MIPS)
 
* [[Hardware_Hacks_for_the_LS2#HairyDairyMaid_.28did_work.29]] - used HDM on the LS2 (MIPS)
 +
 +
== See Also ==
 +
 +
* [[JTAG Software]]
 +
 +
[[Category:JTAG]]

Latest revision as of 03:09, 2 October 2007

Contents

HairyDariyMaid

HairyDairyMaid is a simple flash programmer utility that was originally written to debrick a Linksys WRT54G.

As near as I can tell, the home page is http://downloads.openwrt.org/utils/ . There is a pdf file included in that download bundle. I suggest you read it. (You can skip the description of the WRT hardware.)

Interface Cable

According to the author, HairyDairyMaid was written for only parallel port cables.

Board Support

It was originally written for WRT, but the flash chips may use the same interface.

I suspect it may work only for MIPS hardware (e.g. LS2)

Discussion / Examples

See Also