JTAG Software/OpenOCD
From NAS-Central Buffalo - The Linkstation Wiki
Revision as of 14:53, 20 September 2007 by Ghopper (Talk | contribs) (Create stub page for Open OCD)
Contents
Open OCD
Get the Source
Interface Cable
Open OCD supports parallel port and USB interface cables out of the box.
Board Support (Configuration file)
We need a config file and an init script for the Linkstation boards. If anyone has worked this out tfor OpenOCD, please upload it to the wiki, and link to it here.
Flash Programming
Running the following code should reprogram the flash chip. Please double check Flash ROM to verify the address of the flash for your board.
TODO