JTAG instructions and hints
From NAS-Central Buffalo - The Linkstation Wiki
(→PPC-based-boxes) |
|||
| Line 4: | Line 4: | ||
=Hardware= | =Hardware= | ||
==PPC-based-boxes== | ==PPC-based-boxes== | ||
| - | + | ====JTAG-cable from tampakuro/kuroguy==== | |
| + | ====JTAG10-jtag-cable from http://www.soc-machines.com/==== | ||
===LS1=== | ===LS1=== | ||
TODO: Add info about the additional Hardware mods needed to make JTAG working. Hint: bridge! | TODO: Add info about the additional Hardware mods needed to make JTAG working. Hint: bridge! | ||
+ needed info about Flash structure | + needed info about Flash structure | ||
===HG/HS=== | ===HG/HS=== | ||
| - | + | 1) Installing headers | |
| - | + | TODO: what needs to be bridged? | |
===Terastation=== | ===Terastation=== | ||
TODO: add specific Info if additional hardware mods are needed. | TODO: add specific Info if additional hardware mods are needed. | ||
| Line 17: | Line 18: | ||
TODO: add specific Info if additional hardware mods are needed. | TODO: add specific Info if additional hardware mods are needed. | ||
+ needed info about Flash structure | + needed info about Flash structure | ||
| + | |||
==Mipsel-based boxes== | ==Mipsel-based boxes== | ||
TODO: Add info about the JTAG cable that works on the | TODO: Add info about the JTAG cable that works on the | ||
Revision as of 10:37, 26 March 2007
This article is currently a stub. You can help this Wiki by expanding it .
Contents |
Introduction
TODO: Add generic info about JTAG and why it safes ones ass if he messes with the flash
Hardware
PPC-based-boxes
JTAG-cable from tampakuro/kuroguy
JTAG10-jtag-cable from http://www.soc-machines.com/
LS1
TODO: Add info about the additional Hardware mods needed to make JTAG working. Hint: bridge! + needed info about Flash structure
HG/HS
1) Installing headers TODO: what needs to be bridged?
Terastation
TODO: add specific Info if additional hardware mods are needed. + needed info about Flash structure
Terastation Pro v1
TODO: add specific Info if additional hardware mods are needed. + needed info about Flash structure
Mipsel-based boxes
TODO: Add info about the JTAG cable that works on the + needed info about Flash structure
LS2
Arm-based boxes
Currently we do not know if there are JTAG-Ports anywhere on the board. Tampakuro is tries to find out the JTAG Port of the LS Pro.
LS Pro/LS Live (arm9)
TODO: info about Flash structure
Terastation Pro v2/Terastation Live (arm11)
TODO: info about Flash structure - ANYONE ALREADY HAS ONE?
Software
PPC-based-boxes
How to use the JTAG-Tools
TODO: we need to link + describe either how to compile the tools and how to use the precompiled tools from the download-section
LS2 (mipsel-based)
How to use HairyDairyMaids debrick
TODO: adding info about how to use it
TIPS
Flashing the bootloader only
TODO: because we can flash the firmimg.bin much faster from UBoot
