JTAG instructions and hints

From NAS-Central Buffalo - The Linkstation Wiki
Revision as of 15:27, 14 February 2007 by 85.124.221.56 (Talk)

Jump to: navigation, search

This article is currently a stub. You can help this Wiki by expanding it .

Contents

Introduction

TODO: Add generic info about JTAG and why it safes ones ass if he messes with the flash

Hardware

PPC-based-boxes

TODO: Add Generic Info about Tampakuro`s JTAG-cable, also add some other information if other JTAG-cables can be modified

LS1

TODO: Add info about the additional Hardware mods needed to make JTAG working. Hint: bridge! + needed info about Flash structure

HG/HS

TODO: I think there is not special hardware mod needed. only installing the headers + needed info about Flash structure

Terastation

TODO: add specific Info if additional hardware mods are needed. + needed info about Flash structure

Terastation Pro v1

TODO: add specific Info if additional hardware mods are needed. + needed info about Flash structure

Mipsel-based boxes

TODO: Add info about the JTAG cable that works on the + needed info about Flash structure

LS2

Arm-based boxes

Currently we do not know if there are JTAG-Ports anywhere on the board. Tampakuro is tries to find out the JTAG Port of the LS Pro.

LS Pro/LS Live (arm9)

TODO: info about Flash structure

Terastation Pro v2/Terastation Live (arm11)

TODO: info about Flash structure - ANYONE ALREADY HAS ONE?

Software

PPC-based-boxes

How to use the JTAG-Tools

TODO: we need to link + describe either how to compile the tools and how to use the precompiled tools from the download-section

LS2 (mipsel-based)

How to use HairyDairyMaids debrick

TODO: adding info about how to use it

TIPS

Flashing the bootloader only

TODO: because we can flash the firmimg.bin much faster from UBoot