KuroBoxPro

From NAS-Central Buffalo - The Linkstation Wiki

(Difference between revisions)
Jump to: navigation, search
(→FreeLink (Debian))
(Removing all content from page)
Line 1: Line 1:
-
[[image:kuro-box_pro.jpg|thumb|300px|right|Kuro Box Pro]]
 
-
=Kuro Box Pro=
 
-
 
-
==Hardware Specifications==
 
-
 
-
{| style="background:#F1F1F1;" border="0" cellspacing="0"
 
-
| bgcolor="#FFFFFF" | ||bgcolor="#DDDDDD" |'''Kurobox PRO'''
 
-
|-
 
-
||
 
-
| bgcolor="#99CCCC" |
 
-
|-
 
-
| bgcolor="#DDDDDD" |[[Case]] || 60(W) x 163.6(H) x 215.5(D) mm
 
-
|-
 
-
| bgcolor="#DDDDDD" |[[CPU|CPU Type]] || Marvell 88F5182 (400MHz)
 
-
|-
 
-
| bgcolor="#DDDDDD" |CPU Speed || 400MHZ
 
-
|-
 
-
| bgcolor="#DDDDDD" |[[RAM]] || 128MB (DDR2-SDRAM)
 
-
|-
 
-
| bgcolor="#DDDDDD" |[[Hard Drive]] || Not included
 
-
|-
 
-
| bgcolor="#DDDDDD" |[[IDE Host Controller]]  || Sata - Marvell
 
-
|-
 
-
| bgcolor="#DDDDDD" |[[Ethernet Controller]]  || 1000BASE-T/100BASE-TX/10BASE-T (RJ-45)x1 (AUTO-MDIX)
 
-
|-
 
-
| bgcolor="#DDDDDD" |[[USB Host Controller  |USB Ports]] || USB2.0 (Type A) x2 + SATA + PCIExpressx1
 
-
|-
 
-
| bgcolor="#DDDDDD" |Interface || PCI-Express X1 x1, SATA x1, Through Hall (Pin Header) <br> (UART x1, GPIO x2), I2C x1)
 
-
|-
 
-
| bgcolor="#DDDDDD" |[[Flash ROM]] ||  256KB (NOR), 256MB (NAND)
 
-
|-
 
-
| bgcolor="#DDDDDD" |Internal Bay || 3.5” SATA-HDD Bay x1 Internal Cooling FAN
 
-
|-
 
-
| bgcolor="#DDDDDD" |Power supply || Input: AC100-220V (50/60Hz) (Internal) <br> Output: Max.25W (5V 1.5A, 12V 1.5A)
 
-
|-
 
-
|}
 
-
 
-
==Software Specifications==
 
-
 
-
 
-
{| style="background:#F1F1F1;" border="0" cellspacing="0"
 
-
| bgcolor="#FFFFFF" | ||bgcolor="#DDDDDD" |'''Kurobox PRO'''
 
-
|-
 
-
||
 
-
| bgcolor="#99CCCC" |
 
-
|-
 
-
| bgcolor="#DDDDDD" |Boot Loader || u-boot
 
-
|-
 
-
| bgcolor="#DDDDDD" |Software ||Linux kernel 2.6.12
 
-
|-
 
-
| bgcolor="#DDDDDD" |  || busybox , samba3.0 , mtd-utils , bash , xfs-progs, libtermcap , libncurses , glibc , gcc
 
-
|}
 
-
 
-
==Default Settings==
 
-
 
-
{| style="background:#F1F1F1;" border="0" cellspacing="0"
 
-
| bgcolor="#FFFFFF" | ||bgcolor="#DDDDDD" |'''Kurobox PRO'''
 
-
|-
 
-
||
 
-
| bgcolor="#99CCCC" |
 
-
|-
 
-
| bgcolor="#DDDDDD" |IP Settings ||
 
-
* KURO-BOX/PRO Name:  '''KUROBOX-PRO'''
 
-
* IP Address: DHCP client  <br>(If there is no DHCP server, it will default to 192.168.11.150.)
 
-
|-
 
-
| bgcolor="#DDDDDD" |Date and Time ||
 
-
* Super Capacitor Backup
 
-
* Initialized value : January 1, 1970
 
-
|-
 
-
| bgcolor="#DDDDDD" | Root access ||
 
-
* Console Administrator: '''root'''
 
-
* Password: '''kuroadmin'''
 
-
|-
 
-
| bgcolor="#DDDDDD" |SWAT||
 
-
* SWAT User: '''root'''
 
-
* Password: '''kuroadmin'''
 
-
|-
 
-
| bgcolor="#DDDDDD" |Samba Share Folder||
 
-
* Workgroup Name: '''KUROBOX'''
 
-
* /mnt/mtd: '''mtd device''' (NAND FLASH),
 
-
* /mnt/disk1: '''share''' (HDD)
 
-
|}
 
-
 
-
==Accessing Partions from Samba==
 
-
 
-
There is no FTPd to ftp files into the KuroBox at this point.  But there is Samba!
 
-
 
-
The flash memory is available at
 
-
 
-
<nowiki>smb://kuroip/mtd_device</nowiki>
 
-
 
-
The newly installed hard drive is at
 
-
 
-
<nowiki>smb://kuroip/share</nowiki>
 
-
 
-
You could stop here if you wanted to, after all you have a network share with samba/swat for administration.
 
-
 
-
=Install a root file system (Distribution)=
 
-
The following procedure creates the following partition scheme, and untars a root file system onto '''<tt>p2 (/dev/sda2)</tt>'''. Somehow it rewrites the uboot variables allowing a boot from the hard drive.  Console access would be the preferred way to change these uboot settings.  [http://en.wikipedia.org/wiki/Netcat Netcat] does not seem to work to access [http://en.wikipedia.org/wiki/Uboot uboot]. [[Add Serial Port| Serial]] Console access would be a must [http://linkstationwiki.net/index.php/Add_a_Serial_port_to_the_ARM9_Linkstation].
 
-
 
-
 
-
# <tt>'''p1 : /boot (16MB)'''</tt>
 
-
# <tt>'''p2 : /rootfs (3GB)'''</tt>
 
-
# <tt>'''p4 : extend (others)'''</tt>
 
-
# <tt>'''p5 : swap (128MB)'''</tt>
 
-
# <tt>'''p6 : /share (others)'''</tt>
 
-
{{warning|The provided documentation says that this process is not recommended.
 
-
}}
 
-
 
-
 
-
==Buffalo Provided Developer System==
 
-
 
-
# Connect up the blank unformatted hard drive and power on.
 
-
# Access the Samba share on the kurobox named mtd_device
 
-
# Copy over these files to the samba share from the provided CD-ROM
 
-
## <tt>'''[http://downloads.linkstationwiki.net/KBPro_ARM9/GPL/development_kit/hddrootfs.tar.gz hddrootfs.tar.gz]'''</tt> (this file probably could be replaced with an alternate rootfs, see below)
 
-
## <tt>'''[http://downloads.linkstationwiki.net/KBPro_ARM9/GPL/development_kit/ChangeMeDevHDD ChangeMeDevHDD]'''</tt>
 
-
## <tt>'''[http://downloads.linkstationwiki.net/KBPro_ARM9/GPL/development_kit/ChangeMyUbootEnv ChangeMyUbootEnv]'''</tt>
 
-
## <tt>'''[http://downloads.linkstationwiki.net/KBPro_ARM9/GPL/development_kit/uImage.buffalo uImage.buffalo]''' </tt>
 
-
# Press the red init button on the back till it beeps
 
-
# The Info LED will flash the drive will be partitoned to the above scheme, afterwards the above partition scheme was created and <tt>'''hddrootfs.tar.gz'''</tt> was untarred into <tt>'''/dev/sda2'''</tt> 
 
-
# Reboot System.
 
-
 
-
==GenLink (Gentoo)==
 
-
{{brickable| this is as of yet untested}}
 
-
I think you could use this method to install GenLink, although I'm not sure that 3GB is a large enough root file space
 
-
 
-
# Connect up the blank unformatted hard drive and power on.
 
-
# Access the Samba share on the kurobox named mtd_device
 
-
# Download the GenLink Tarball: http://downloads.linkstationwiki.net/LSPro_ARM9/Distributions/Genlink/Rootfs/GenLink_arm9-1.0pre6-20070227.tar.bz2
 
-
# Then rename it to <tt>'''hddrootfs.tar.gz'''</tt> and copy it over to the Samba Share
 
-
# Copy over these files to the samba share from the provided CD-ROM
 
-
## <tt>'''[http://downloads.linkstationwiki.net/KBPro_ARM9/GPL/development_kit/ChangeMeDevHDD ChangeMeDevHDD]'''</tt>
 
-
## <tt>'''[http://downloads.linkstationwiki.net/KBPro_ARM9/GPL/development_kit/ChangeMyUbootEnv ChangeMyUbootEnv]'''</tt>
 
-
## <tt>'''[http://downloads.linkstationwiki.net/KBPro_ARM9/GPL/development_kit/uImage.buffalo uImage.buffalo]''' </tt>
 
-
# Press the red init button on the back till it beeps
 
-
# The Info LED will flash and the drive will be partitoned and Genlink Installed
 
-
# Reboot System.
 
-
# Then follow the directions for the [http://linkstationwiki.net/index.php/GenLink#First_boot_of_the_new_Genlink_rootfs First boot of the new GenLink rootfs]
 
-
 
-
==FreeLink (Debian)==
 
-
{{brickable| this is as of yet untested, however the method has been reported to work by a few japanese kuroboxpro users.}}
 
-
 
-
 
-
# Connect up the blank unformatted hard drive and power on.
 
-
# Access the Samba share on the kurobox named mtd_device
 
-
# Download the FreeLink zip archive: http://downloads.linkstationwiki.net/LSPro_ARM9/Distributions/Freelink/FreeLink_arm9-1.0rev2.zip
 
-
# Unzip it and find the <tt>'''hddrootfs.img'''</tt> file
 
-
# Rename it to have the <tt>'''.tgz'''</tt> extension
 
-
# Extract this file with the following password: <pre>IeY8omJwGlGkIbJm2FH_MV4fLsXE8ieu0gNYwE6Ty</pre>
 
-
# Rename the resultant file to<tt>'''hddrootfs.tar.gz'''</tt> and copy it over to the Samba Share
 
-
# Copy over these files to the samba share from the provided CD-ROM
 
-
## <tt>'''[http://downloads.linkstationwiki.net/KBPro_ARM9/GPL/development_kit/ChangeMeDevHDD ChangeMeDevHDD]'''</tt>
 
-
## <tt>'''[http://downloads.linkstationwiki.net/KBPro_ARM9/GPL/development_kit/ChangeMyUbootEnv ChangeMyUbootEnv]'''</tt>
 
-
## <tt>'''[http://downloads.linkstationwiki.net/KBPro_ARM9/GPL/development_kit/uImage.buffalo uImage.buffalo]''' </tt>
 
-
# Press the red init button on the back till it beeps
 
-
# The Info LED will flash and the drive will be partitoned and FreeLink Installed
 
-
# Reboot and use ssh to login to your newly FreeLinked KuroBox Pro with ''login:root'' and  ''password:lspro''
 
-
# You will now need to change a line in the the /usr/local/sbin/kernelmon script: "cat /proc/'''driver'''/kernevnt" to "cat /proc/'''buffalo'''/kernevnt".
 
-
# Remember to change the <tt>'''/etc/fstab'''</tt> to reflect the location of linux swap
 
-
# Then follow the directions for [http://linkstationwiki.net/index.php/FreeLink_for_the_Linkstation_Pro#Update_of_the_debian_packages    FreeLink for the Linkstation Pro: Update of the debian packages]
 
-
 
-
=Japanese Kuro-Box Interface=
 
-
==Webserver==
 
-
 
-
<nowiki>http://kuroip</nowiki>
 
-
gives
 
-
 
-
[[image:kuro.gif]]
 
-
 
-
linked to http://www.kuroutoshikou.com/
 
-
 
-
 
-
 
-
this could be changed the index.html and gif is in:
 
-
<pre>
 
-
./www:
 
-
drw-r--r--    3 root    root            0 Feb  9 10:17 .
 
-
drwxr-xr-x  18 root    root            0 May 23 01:57 ..
 
-
drwxrwxrwx    2 root    root            0 Feb  9 22:35 img
 
-
-rwxrwxrwx    1 root    root          95 Feb  9 10:17 index.html
 
-
 
-
./www/img:
 
-
drwxrwxrwx    2 root    root            0 Feb  9 22:35 .
 
-
drw-r--r--    3 root    root            0 Feb  9 10:17 ..
 
-
-rwxrwxrwx    1 root    root        4587 Feb  9 22:35 kuro.gif
 
-
</pre>
 
-
 
-
==Starting Beep==
 
-
 
-
The KuroPro makes a distinctive starting beep.  You can use the beeper to play sounds at any time if you want
 
-
it uses miconapl
 
-
 
-
 
-
PlayBeep.sh /usr/local/music/SW_ON.msc
 
-
 
-
 
-
 
-
''/usr/local/bin/Playbeep.sh''
 
-
<pre>
 
-
#!/bin/sh
 
-
 
-
if [ -f "$1" ] ; then
 
-
        TEMPO=`grep "TEMPO=" $1|sed -e "s/TEMPO=//"`
 
-
        MELODY=`grep -v "TEMPO=" $1`
 
-
        PLAYDATA="${TEMPO} ${MELODY}"
 
-
else
 
-
        MELODY=`echo $*| sed -e "s/$0//"`
 
-
        PLAYDATA=${MELODY}
 
-
fi
 
-
 
-
miconapl -a bz_melody ${PLAYDATA}
 
-
</pre>
 
-
 
-
''/usr/local/music/SW_ON.msc''
 
-
 
-
TEMPO=30
 
-
b4 b5 b4 b6
 
-
 
-
 
-
 
-
==dmesg==
 
-
These are from a Japanese Kuro Pro the American and European versions may be different
 
-
 
-
<pre>
 
-
/mnt/mtd # dmesg
 
-
pj=1331200)
 
-
Mount-cache hash table entries: 512
 
-
CPU: Testing write buffer coherency: ok
 
-
NET: Registered protocol family 16
 
-
serial_initialize_ttyS1 (Debug): ttyS1 is initialized.
 
-
config_device_cs Error : Unknown board
 
-
 
-
CPU Interface
 
-
-------------
 
-
SDRAM_CS0 ....base 00000000, size 128MB
 
-
SDRAM_CS1 ....disable
 
-
SDRAM_CS2 ....disable
 
-
SDRAM_CS3 ....disable
 
-
PEX0_MEM ....base e0000000, size 128MB
 
-
PEX0_IO ....base f2000000, size  1MB
 
-
PCI0_MEM ....base e8000000, size 128MB
 
-
PCI0_IO ....base f2100000, size  1MB
 
-
INTER_REGS ....base f1000000, size  1MB
 
-
DEVICE_CS0 ....base fa000000, size  2MB
 
-
DEVICE_CS1 ....base f4000000, size  32MB
 
-
DEVICE_CS2 ....base fa800000, size  1MB
 
-
DEV_BOOCS ....base ff800000, size  8MB
 
-
CRYPTO ENG ....no such
 
-
Flash bankwidth 1, base ff800000, size 400000
 
-
KUROBOX FLASH size 4096[KB]
 
-
 
-
  Marvell Development Board (LSP Version 1.10.3.patch5_DB_NAS)-- KUROBOX_BOARD_KUROBOX  Soc: 88F5182 A2
 
-
 
-
Detected Tclk 166664740 and SysClk 250000000
 
-
Marvell USB EHCI Host controller #0: c04e4b00
 
-
Marvell USB EHCI Host controller #1: c04e4a40
 
-
pexBarOverlapDetect: winNum 2 overlap current 0
 
-
mvPexInit:Warning :Bar 2 size is illigal
 
-
it will be disabled
 
-
please check Pex and CPU windows configuration
 
-
PCI: bus0: Fast back to back transfers enabled
 
-
PCI: bus1: Fast back to back transfers enabled
 
-
SCSI subsystem initialized
 
-
usbcore: registered new driver usbfs
 
-
usbcore: registered new driver hub
 
-
Use the XOR engines (offloading) for enhancing the following functions:
 
-
  o RAID 5 Xor calculation
 
-
  o kernel memcpy
 
-
  o kenrel memzero
 
-
  o copy user to/from kernel buffers
 
-
Number of XOR engines to use: 2
 
-
cesadev_init(c00122e4)
 
-
Fast Floating Point Emulator V0.9 (c) Peter Teichmann.
 
-
inotify device minor=63
 
-
JFFS2 version 2.2. (NAND) (C) 2001-2003 Red Hat, Inc.
 
-
SGI XFS with no debug enabled
 
-
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
 
-
ttyS0 at MMIO 0x0 (irq = 3) is a 16550A
 
-
ttyS1 at MMIO 0x0 (irq = 4) is a 16550A
 
-
io scheduler noop registered
 
-
io scheduler anticipatory registered
 
-
io scheduler deadline registered
 
-
io scheduler cfq registered
 
-
RAMDISK driver initialized: 3 RAM disks of 32768K size 1024 blocksize
 
-
loop: loaded (max 8 devices)
 
-
Marvell Gigabit Ethernet Driver 'egiga':
 
-
  o Ethernet descriptors in DRAM
 
-
  o DRAM SW cache-coherency
 
-
  o Checksum offload enabled
 
-
  o Loading network interface ** egiga_init_module (10)
 
-
'eth0'
 
-
Intergrated Sata device found
 
-
scsi0 : Marvell SCSI to SATA adapter
 
-
scsi1 : Marvell SCSI to SATA adapter
 
-
physmap flash device: 400000 at ff800000
 
-
CFI: Found no phys_mapped_flash device at location zero
 
-
Found: SST 39LF020
 
-
phys_mapped_flash: Found 1 x8 devices at 0x0 in 8-bit bank
 
-
phys_mapped_flash: Found an alias at 0x40000 for the chip at 0x0
 
-
phys_mapped_flash: Found an alias at 0x80000 for the chip at 0x0
 
-
phys_mapped_flash: Found an alias at 0xc0000 for the chip at 0x0
 
-
phys_mapped_flash: Found an alias at 0x100000 for the chip at 0x0
 
-
phys_mapped_flash: Found an alias at 0x140000 for the chip at 0x0
 
-
phys_mapped_flash: Found an alias at 0x180000 for the chip at 0x0
 
-
phys_mapped_flash: Found an alias at 0x1c0000 for the chip at 0x0
 
-
phys_mapped_flash: Found an alias at 0x200000 for the chip at 0x0
 
-
phys_mapped_flash: Found an alias at 0x240000 for the chip at 0x0
 
-
phys_mapped_flash: Found an alias at 0x280000 for the chip at 0x0
 
-
phys_mapped_flash: Found an alias at 0x2c0000 for the chip at 0x0
 
-
phys_mapped_flash: Found an alias at 0x300000 for the chip at 0x0
 
-
phys_mapped_flash: Found an alias at 0x340000 for the chip at 0x0
 
-
phys_mapped_flash: Found an alias at 0x380000 for the chip at 0x0
 
-
phys_mapped_flash: Found an alias at 0x3c0000 for the chip at 0x0
 
-
number of JEDEC chips: 1
 
-
cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
 
-
RedBoot partition parsing not available
 
-
Debug nand_scan : nand_flash_ids[i].pagesize is exist
 
-
Debug nand_scan : mtd->erasesize=0x00020000
 
-
Debug nand_scan : mtd->oobblock=0x00000800
 
-
Debug nand_scan : mtd->oobsize=0x00000040
 
-
NAND device: Manufacturer ID: 0x20, Chip ID: 0xda (ST Micro NAND 256MiB 3,3V 8-bit)
 
-
Scanning device for bad blocks
 
-
Using static partition definition
 
-
Creating 3 MTD partitions on "nand_mtd":
 
-
0x00000000-0x00400000 : "uImage"
 
-
0x00400000-0x04400000 : "rootfs"
 
-
0x04400000-0x10000000 : "extra"
 
-
usbmon: debugs is not available
 
-
ehci_platform ehci_platform.4523: EHCI Host Controller
 
-
ehci_platform ehci_platform.4523: new USB bus registered, assigned bus number 1
 
-
ehci_platform ehci_platform.4523: irq 17, io mem 0x00000000
 
-
ehci_platform ehci_platform.4523: park 0
 
-
ehci_platform ehci_platform.4523: USB 0.0 initialized, EHCI 1.00, driver 10 Dec 2004
 
-
hub 1-0:1.0: USB hub found
 
-
hub 1-0:1.0: 1 port detected
 
-
ehci_platform ehci_platform.16781: EHCI Host Controller
 
-
ehci_platform ehci_platform.16781: new USB bus registered, assigned bus number 2
 
-
ehci_platform ehci_platform.16781: irq 12, io mem 0x00000000
 
-
ehci_platform ehci_platform.16781: park 0
 
-
ehci_platform ehci_platform.16781: USB 0.0 initialized, EHCI 1.00, driver 10 Dec 2004
 
-
hub 2-0:1.0: USB hub found
 
-
hub 2-0:1.0: 1 port detected
 
-
ohci_hcd: 2004 Nov 08 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
 
-
USB Universal Host Controller Interface driver v2.2
 
-
Initializing USB Mass Storage driver...
 
-
usbcore: registered new driver usb-storage
 
-
USB Mass Storage support registered.
 
-
usbcore: registered new driver usbhid
 
-
drivers/usb/input/hid-core.c: v2.01:USB HID core driver
 
-
mice: PS/2 mouse device common for all mice
 
-
md: raid0 personality registered as nr 2
 
-
md: raid1 personality registered as nr 3
 
-
md: raid5 personality registered as nr 4
 
-
raid5: measuring checksumming speed
 
-
  arm4regs  :  309.200 MB/sec
 
-
  8regs    :  217.600 MB/sec
 
-
  32regs    :  252.400 MB/sec
 
-
raid5: using function: arm4regs (309.200 MB/sec)
 
-
md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27
 
-
Buffalo Platform Linux Driver(Light) 0.01 installed.
 
-
MICON ctrl (C) BUFFALO INC. V.1.00 installed.
 
-
Kernel event proc (C) BUFFALO INC. V.1.00 installed.
 
-
MICON V2 (C) BUFFALO INC. V.1.00 installed.
 
-
NET: Registered protocol family 2
 
-
IP: routing cache hash table of 1024 buckets, 8Kbytes
 
-
TCP established hash table entries: 8192 (order: 4, 65536 bytes)
 
-
TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
 
-
TCP: Hash tables configured (established 8192 bind 8192)
 
-
NET: Registered protocol family 1
 
-
NET: Registered protocol family 17
 
-
md: Autodetecting RAID arrays.
 
-
md: autorun ...
 
-
md: ... autorun DONE.
 
-
Empty flash at 0x00df85f8 ends at 0x00df8800
 
-
VFS: Mounted root (jffs2 filesystem).
 
-
Freeing init memory: 112K
 
-
jffs2_get_inode_nodes(): Data CRC failed on node at 0x01dc1308: Read 0xca66d714, calculated 0xc26a5721
 
-
eth0: link down
 
-
eth0: link up<5>, full duplex<5>, speed 1 Gbps<5>
 
-
 
-
</pre>
 
-
 
-
 
-
==File Structure ==
 
-
http://www.kurobox.com/mwiki/images/b/b4/Kuroboxprofilestructure.txt
 
-
 
-
==Uboot Settings==
 
-
===[http://karlo.homedns.org/mt/kuroboxpro/printenv.log Marvell>> printenv At the time of Flash starting]===
 
-
<pre>
 
-
baudrate=115200
 
-
loads_echo=0
 
-
ipaddr=192.168.11.150
 
-
serverip=192.168.11.1
 
-
rootpath=/nfs/arm
 
-
cpuName=926
 
-
CASset=min
 
-
MALLOC_len=4
 
-
bootargs_end=:::DB88FXX81:eth0:none
 
-
ethact=egiga0
 
-
ethaddr=00:16:01:A4:C2:4A
 
-
buffalo_ver=BOOTVER=1.091
 
-
build_time=15:59:38
 
-
initrd=initrd.buffalo
 
-
kernel=uImage.buffalo
 
-
bootargs_base=console=ttyS0,115200
 
-
bootargs_root=root=/dev/mtdblock2 rw panic=5
 
-
bootargs=$(bootargs_base) $(bootargs_root) $(buffalo_ver)
 
-
nand_uImage_offset=20000
 
-
default_kernel_addr=0x00100000
 
-
default_initrd_addr=0x02000000
 
-
def_tftp=tftp $(default_kernel_addr) $(kernel); tftp $(default_initrd_addr) $(initrd); setenv bootargs $(bootargs_base) $(bootargs_root)  rw initrd=0x02000040,20M panic=5 $(buffalo_ver); bootm $(default_kernel_addr) $(default_initrd_addr)
 
-
nand_boot=yes
 
-
stdin=serial
 
-
stdout=serial
 
-
stderr=serial
 
-
enaMonExt=no
 
-
enaFlashBuf=yes
 
-
enaCpuStream=no
 
-
ethprime=egiga0
 
-
bootdelay=3
 
-
disaMvPnp=no
 
-
overEthAddr=no
 
-
usb0Mode=host
 
-
usb1Mode=host
 
-
force_tftp=1
 
-
bootcmd=tftp $(default_kernel_addr) $(kernel); tftp $(default_initrd_addr) $(initrd); setenv bootargs $(bootargs_base) $(bootargs_root)  rw initrd=0x02000040,20M panic=5 $(buffalo_ver); bootm $(default_kernel_addr) $(default_initrd_addr)
 
-
 
-
Environment size: 1192/4092 bytes
 
-
</pre>
 
-
 
-
===[http://karlo.homedns.org/mt/kuroboxpro/printenv2.log Marvell>> printenv At the time of HDD starting]===
 
-
<pre>
 
-
baudrate=115200
 
-
loads_echo=0
 
-
ipaddr=192.168.11.150
 
-
serverip=192.168.11.1
 
-
rootpath=/nfs/arm
 
-
cpuName=926
 
-
CASset=min
 
-
MALLOC_len=4
 
-
bootargs_end=:::DB88FXX81:eth0:none
 
-
ethact=egiga0
 
-
ethaddr=00:16:01:A4:C2:4A
 
-
buffalo_ver=BOOTVER=1.091
 
-
build_time=15:59:38
 
-
initrd=initrd.buffalo
 
-
kernel=uImage.buffalo
 
-
bootargs_base=console=ttyS0,115200
 
-
bootargs_root=root=/dev/sda2 rw panic=5
 
-
bootargs=console=ttyS0,115200 root=/dev/sda2 rw panic=5 BOOTVER=1.09
 
-
nand_uImage_offset=20000
 
-
default_kernel_addr=0x00100000
 
-
default_initrd_addr=0x02000000
 
-
def_tftp=tftp $(default_kernel_addr) $(kernel); tftp $(default_initrd_addr) $(initrd); setenv bootargs $(bootargs_base) $(bootargs_root)  rw initrd=0x02000040,20M panic=5 $(buffalo_ver); bootm $(default_kernel_addr) $(default_initrd_addr)
 
-
nand_boot=no
 
-
stdin=serial
 
-
stdout=serial
 
-
stderr=serial
 
-
enaMonExt=no
 
-
enaFlashBuf=yes
 
-
enaCpuStream=no
 
-
ethprime=egiga0
 
-
bootdelay=3
 
-
disaMvPnp=no
 
-
overEthAddr=no
 
-
usb0Mode=host
 
-
usb1Mode=host
 
-
force_tftp=1
 
-
bootcmd=tftp $(default_kernel_addr) $(kernel); tftp $(default_initrd_addr) $(initrd); setenv bootargs $(bootargs_base) $(bootargs_root)  rw initrd=0x02000040,20M panic=5 $(buffalo_ver); bootm $(default_kernel_addr) $(default_initrd_addr)
 
-
 
-
Environment size: 1197/4092 bytes
 
-
 
-
</pre>
 
-
 
-
=References=
 
-
*  [http://www.kurobox.com/downloads/KuroboxPro/Product%20Specifications.pdf Kurobox Pro specification document]
 
-
* [http://www.kurobox.com/downloads/KuroboxPro/KUROPRO_guide.pdf KuroboxPro User's Guide in English]
 
-
* [[Debian on the Kurobox]] - [[Debian install]]
 
-
* [http://tools.search.yahoo.com/language/translation/tbTranslatedPage.php?fr=slv1&lp=xx_en&text=http%3A%2F%2Fkarlo.homedns.org%2Fmt%2F2007%2F04%2F    Change of starting device (1)]
 
-
* [http://karlo.homedns.org/mt/kuroboxpro/printenv.log Marvell>> printenv At the time of Flash starting]
 
-
* [http://karlo.homedns.org/mt/kuroboxpro/printenv2.log Marvell>> printenv At the time of HDD starting]
 
-
* [http://linkstationwiki.net/index.php/GenLink Linkstationwiki: GenLink]
 
-
* [http://linkstationwiki.net/index.php/FreeLink_for_the_Linkstation_Pro Linkstationwiki: FreeLink for the Linkstation Pro]
 
-
* [http://downloads.linkstationwiki.net/KBPro_ARM9/GPL/source/ KuroBox Pro GPL Sources]
 
-
* [http://www.ch1.pwp.blueyonder.co.uk/ KuroBox Photos]
 
-
* [http://kuroutoshikou.com/products/scon-kit_pro/scon-kit_pro_quickmanual.pdf PDF of SCION USB serial access kit]
 

Revision as of 12:12, 7 July 2007

Retrieved from "http://buffalo.nas-central.org/wiki/KuroBoxPro"
Personal tools