Kurobox Pro u-boot environment variable settings - Revision history

Ramuk: /* Boot settings when uImage(/dev/sda1), rootfs(/dev/sda2) */

Ramuk — Wed, 21 May 2008 14:11:59 GMT

Boot settings when uImage(/dev/sda1), rootfs(/dev/sda2)

← Older revision		Revision as of 14:11, 21 May 2008
Line 104:		Line 104:
	\|-		\|-
	\|\|Notes \|\|		\|\|Notes \|\|
-	* /dev/~~sdal~~ is formatted in ext2, and uImage.buffalo is stored.	+	* /dev/sda1 is formatted in ext2, and uImage.buffalo is stored.
	\|}		\|}
	====u-boot environment settings====		====u-boot environment settings====

Gv: Correct environment at flash starting

Gv — Thu, 24 Apr 2008 14:37:36 GMT

Correct environment at flash starting

← Older revision		Revision as of 14:37, 24 April 2008
Line 29:		Line 29:
	</pre>		</pre>

-	===[http://~~karlo~~.~~homedns.org~~/mt/~~kuroboxpro~~/~~printenv~~.~~log~~ Marvell>> ~~printenv At~~ the time of Flash starting]===	+	===[http://kuroutoshikou.com/products/kuro_box_pro/u-boot-initienv.txt Marvell>> environment at the time of Flash starting]===
	<pre>		<pre>
	baudrate=115200		baudrate=115200
Line 36:		Line 36:
	serverip=192.168.11.1		serverip=192.168.11.1
	rootpath=/nfs/arm		rootpath=/nfs/arm
		+	stdin=serial
		+	stdout=serial
		+	stderr=serial
	cpuName=926		cpuName=926
	CASset=min		CASset=min
		+	enaMonExt=no
		+	enaFlashBuf=yes
		+	enaCpuStream=no
	MALLOC_len=4		MALLOC_len=4
		+	ethprime=egiga0
	bootargs_end=:::DB88FXX81:eth0:none		bootargs_end=:::DB88FXX81:eth0:none
-	~~ethact=egiga0~~
-	~~ethaddr=00:16:01:A4:C2:4A~~
	buffalo_ver=BOOTVER=1.091		buffalo_ver=BOOTVER=1.091
-	build_time=15:59:38	+	build_time=18:10:02
	initrd=initrd.buffalo		initrd=initrd.buffalo
	kernel=uImage.buffalo		kernel=uImage.buffalo
Line 52:		Line 57:
	default_kernel_addr=0x00100000		default_kernel_addr=0x00100000
	default_initrd_addr=0x02000000		default_initrd_addr=0x02000000
-	def_tftp=tftp $(default_kernel_addr) $(kernel); tftp $(default_initrd_addr) $(initrd); setenv bootargs $(bootargs_base) $(bootargs_root) rw initrd=0x02000040,20M panic=5 $(buffalo_ver); bootm $(default_kernel_addr) $(default_initrd_addr)	+	bootcmd=nboot $(default_kernel_addr) 0 $(nand_uImage_offset) ;setenv bootargs $(bootargs_base) $(bootargs_root) $(buffalo_ver); bootm $(default_kernel_addr)
		+	def_tftp=tftp $(default_kernel_addr) $(kernel); tftp $(default_initrd_addr) $(initrd); setenv bootargs $(bootargs_base) $(bootargs_root) rw initrd=0x02000040,20M panic=5 $(buffalo_ver); bootm $(default_kernel_addr) $(default_initrd_addr)
	nand_boot=yes		nand_boot=yes
-	~~stdin=serial~~
-	~~stdout=serial~~
-	~~stderr=serial~~
-	~~enaMonExt=no~~
-	~~enaFlashBuf=yes~~
-	~~enaCpuStream=no~~
-	~~ethprime=egiga0~~
	bootdelay=3		bootdelay=3
	disaMvPnp=no		disaMvPnp=no
Line 66:		Line 65:
	usb0Mode=host		usb0Mode=host
	usb1Mode=host		usb1Mode=host
-	~~force_tftp~~=1	+	ethact=egiga0
-	~~bootcmd~~=tftp $(default_kernel_addr) $(kernel); tftp $(default_initrd_addr) $(initrd); setenv bootargs $(bootargs_base) $(bootargs_root) rw initrd=0x02000040,20M panic=5 $(buffalo_ver); bootm $(default_kernel_addr) $(default_initrd_addr)	+	ethaddr=XX:XX:XX:XX:XX:XX</pre>
-		+
-	~~Environment size~~: ~~1192/4092 bytes~~	+
-	</pre>	+

	==HARD DRIVE BOOT==		==HARD DRIVE BOOT==

Davy gravy at 19:59, 26 January 2008

Davy gravy — Sat, 26 Jan 2008 19:59:37 GMT

← Older revision		Revision as of 19:59, 26 January 2008
Line 1:		Line 1:
-	{{Articles\|KuroboxPro}}	+	{{Articles\|KuroboxPro\|UBoot}}

	==CHANGING U-BOOT SETTINGS==		==CHANGING U-BOOT SETTINGS==

Duncan h at 05:07, 28 December 2007

Duncan h — Fri, 28 Dec 2007 05:07:17 GMT

← Older revision		Revision as of 05:07, 28 December 2007
Line 1:		Line 1:
	{{Articles\|KuroboxPro}}		{{Articles\|KuroboxPro}}
		+
		+	==CHANGING U-BOOT SETTINGS==
		+	use "setenv ... " as shown below, check with "printenv", then save to flash with "saveenv".

	==FLASH BOOT==		==FLASH BOOT==

Philips: /* u-boot environment variable settings */

Philips — Tue, 06 Nov 2007 04:49:14 GMT

u-boot environment variable settings

← Older revision		Revision as of 04:49, 6 November 2007
Line 219:		Line 219:
	setenv default_initrd_addr 0x02000000		setenv default_initrd_addr 0x02000000
	setenv bootargs_base console=ttyS0,115200		setenv bootargs_base console=ttyS0,115200
-	setenv bootargs_root root=/dev/~~mtdblock2~~ rw	+	setenv bootargs_root root=/dev/ram0 rw
	setenv bootargs $(bootargs_base) $(bootargs_root) $(buffalo_ver)		setenv bootargs $(bootargs_base) $(bootargs_root) $(buffalo_ver)
	setenv serverip 192.168.11.100		setenv serverip 192.168.11.100

Philips: /* u-boot environment variable settings */

Philips — Tue, 06 Nov 2007 04:35:06 GMT

u-boot environment variable settings

← Older revision		Revision as of 04:35, 6 November 2007
Line 223:		Line 223:
	setenv serverip 192.168.11.100		setenv serverip 192.168.11.100
	setenv ipaddr 192.168.11.150		setenv ipaddr 192.168.11.150
-	setenv bootcmd 'tftp $(default_kernel_addr) $(kernel); tftp $(default_initrd_addr) $(initrd); bootm$(default_kernel_addr) $(default_initrd_addr)'	+	setenv bootcmd 'tftp $(default_kernel_addr) $(kernel); tftp $(default_initrd_addr) $(initrd); bootm $(default_kernel_addr) $(default_initrd_addr)'
	</pre>		</pre>

Skorianez: /* u-boot environment variable settings */

Skorianez — Fri, 12 Oct 2007 21:21:55 GMT

u-boot environment variable settings

← Older revision		Revision as of 21:21, 12 October 2007
Line 223:		Line 223:
	setenv serverip 192.168.11.100		setenv serverip 192.168.11.100
	setenv ipaddr 192.168.11.150		setenv ipaddr 192.168.11.150
-	setenv bootcmd ~~‘tftp~~ $(default_kernel_addr) $(kernel); tftp $(default_initrd_addr) $(initrd); bootm$(default_kernel_addr) $(default_initrd_addr)’	+	setenv bootcmd 'tftp $(default_kernel_addr) $(kernel); tftp $(default_initrd_addr) $(initrd); bootm$(default_kernel_addr) $(default_initrd_addr)'
	</pre>		</pre>

Skorianez: /* u-boot environment variable settings */

Skorianez — Fri, 12 Oct 2007 21:21:10 GMT

u-boot environment variable settings

← Older revision		Revision as of 21:21, 12 October 2007
Line 190:		Line 190:
	setenv serverip 192.168.11.100		setenv serverip 192.168.11.100
	setenv ipaddr 192.168.11.150		setenv ipaddr 192.168.11.150
-	setenv bootcmd ~~‘tftp~~ $(default_kernel_addr) $(kernel); bootm $(default_kernel_addr)	+	setenv bootcmd 'tftp $(default_kernel_addr) $(kernel); bootm $(default_kernel_addr)'
	</pre>		</pre>

Skorianez: /* u-boot environment settings */

Skorianez — Fri, 12 Oct 2007 21:20:38 GMT

u-boot environment settings

← Older revision		Revision as of 21:20, 12 October 2007
Line 114:		Line 114:
	setenv bootargs_root root=/dev/sda2 rw		setenv bootargs_root root=/dev/sda2 rw
	setenv bootargs $(bootargs_base) $(bootargs_root) $(buffalo_ver)		setenv bootargs $(bootargs_base) $(bootargs_root) $(buffalo_ver)
-	setenv bootcmd ~~‘ext2load~~ ide 0:1 $(default_kernel_addr)/$(kernel); bootm $(default_kernel_addr)’	+	setenv bootcmd 'ext2load ide 0:1 $(default_kernel_addr)/$(kernel); bootm $(default_kernel_addr)'
	</pre>		</pre>
-

	===[http://karlo.homedns.org/mt/kuroboxpro/printenv2.log Marvell>> printenv At the time of HDD starting]===		===[http://karlo.homedns.org/mt/kuroboxpro/printenv2.log Marvell>> printenv At the time of HDD starting]===

Skorianez: /* u-boot environment settings */

Skorianez — Fri, 12 Oct 2007 21:20:08 GMT

u-boot environment settings

← Older revision		Revision as of 21:20, 12 October 2007
Line 91:		Line 91:
	setenv uImage block 0		setenv uImage block 0
	setenv uImage_offset 0x00020000		setenv uImage_offset 0x00020000
-	setenv bootcmd ~~‘nboot~~ $(default_kernel_addr) $(uImage_block) $(uImage_offset); bootm $(default_kernel_addr)’	+	setenv bootcmd 'nboot $(default_kernel_addr) $(uImage_block) $(uImage_offset); bootm $(default_kernel_addr)'
	</pre>		</pre>