LS Mini: Serial Port Output - Boot-Log
From NAS-Central Buffalo - The Linkstation Wiki
(Difference between revisions)
m |
Laitr Keiows (Talk | contribs) (→Uboot env settings: moved to separate page) |
||
| (4 intermediate revisions not shown) | |||
| Line 1: | Line 1: | ||
{{Articles|Hardware|LS-WSGL/R1}} | {{Articles|Hardware|LS-WSGL/R1}} | ||
| + | [[Image:LS_WSGL.jpg|thumb|right|Linkstation Mini]] | ||
=Serial Port Output= | =Serial Port Output= | ||
| Line 118: | Line 119: | ||
</pre> | </pre> | ||
| - | == | + | == U-Boot settings == |
| - | + | [[LS Mini: Serial Port Output - U-Boot]] | |
| - | + | ||
| - | + | ||
| - | + | ||
| - | + | ||
| - | + | ||
| - | + | ||
| - | + | ||
| - | + | ||
| - | + | ||
| - | + | ||
| - | + | ||
| - | + | ||
| - | + | ||
| - | + | ||
| - | + | ||
| - | + | ||
| - | + | ||
| - | + | ||
| - | + | ||
| - | + | ||
| - | + | ||
| - | + | ||
| - | + | ||
| - | + | ||
| - | + | ||
| - | + | ||
| - | + | ||
| - | + | ||
| - | + | ||
| - | + | ||
| - | + | ||
| - | + | ||
| - | + | ||
| - | + | ||
| - | + | ||
| - | + | ||
| - | + | ||
| - | + | ||
| - | + | ||
| - | + | ||
| - | + | ||
=Settings= | =Settings= | ||
| Line 213: | Line 173: | ||
VmallocUsed: 1040 kB | VmallocUsed: 1040 kB | ||
VmallocChunk: 383984 kB | VmallocChunk: 383984 kB | ||
| + | |||
| + | ==cat /proc/interrupts== | ||
| + | CPU0 | ||
| + | 0: 9197 Mv Timer Tick | ||
| + | 3: 351 serial | ||
| + | 21: 45 eth0 | ||
| + | 29: 1180 mvSata | ||
| + | 47: 0 FuncSw | ||
| + | Err: 0 | ||
==lsmod== | ==lsmod== | ||
| Line 364: | Line 333: | ||
==dmesg== | ==dmesg== | ||
| - | + | Linux version 2.6.16.16-arm1 (root@I.You) (gcc version 3.4.4 (release) (CodeSourcery ARM 2005q3-2)) #316 Tue Jul 22 16:22:33 JST 2008 | |
| + | CPU: ARM926EJ-Sid(wb) [41069260] revision 0 (ARMv5TEJ) | ||
| + | Machine: MV-88fxx81 | ||
| + | Using UBoot passing parameters structure | ||
| + | Sys Clk = 200000000, Tclk = 166664740 | ||
| + | |||
| + | |||
| + | - Warning - This LSP release was tested only with U-Boot release 1.7.3 | ||
| + | |||
| + | Memory policy: ECC disabled, Data cache writeback | ||
| + | On node 0 totalpages: 32768 | ||
| + | DMA zone: 32768 pages, LIFO batch:7 | ||
| + | DMA32 zone: 0 pages, LIFO batch:0 | ||
| + | Normal zone: 0 pages, LIFO batch:0 | ||
| + | HighMem zone: 0 pages, LIFO batch:0 | ||
| + | CPU0: D VIVT write-back cache | ||
| + | CPU0: I cache: 32768 bytes, associativity 1, 32 byte lines, 1024 sets | ||
| + | CPU0: D cache: 32768 bytes, associativity 1, 32 byte lines, 1024 sets | ||
| + | Built 1 zonelists | ||
| + | Kernel command line: console=ttyS0,115200 root=/dev/sda2 rw initrd=0x00800040,15M panic=5 func=0 BOOTVER=1.13 | ||
| + | PID hash table entries: 1024 (order: 10, 16384 bytes) | ||
| + | Console: colour dummy device 80x30 | ||
| + | Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) | ||
| + | Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) | ||
Memory: 128MB 0MB 0MB 0MB = 128MB total | Memory: 128MB 0MB 0MB 0MB = 128MB total | ||
Memory: 110620KB available (2992K code, 553K data, 112K init) | Memory: 110620KB available (2992K code, 553K data, 112K init) | ||
| Line 615: | Line 607: | ||
199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 0 | 199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 0 | ||
223 Load_Retry_Count 0x000a 100 100 000 Old_age Always - 0 | 223 Load_Retry_Count 0x000a 100 100 000 Old_age Always - 0 | ||
| + | |||
| + | ==reboot procedure== | ||
| + | Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(1,0) | ||
| + | <0>Rebooting in 90 seconds.. | ||
| + | BuffaloChangePowerStatusBeforeHalt > Check power status. MagicKey = 24 | ||
| + | BuffaloChangePowerStatusBeforeHalt > Changed to 43 from 24 | ||
Latest revision as of 02:51, 29 September 2008
Serial Port Output
Bootup Sequence
Orion1 CPU = Low
> Checking hardware info ...
=== Strap status : 0x00802030 ===
=== H/W boardId : 0x33 ===
=== boardId : 0x1a ===
=== micon_support: off ===
> OK.
=== BUFFALO LS-WSGL/R1 U-Boot. ===
** LOADER **
** BUFFALO BOARD: BUFFALO_BOARD_LS_WSGL/R1 LE (CFG_ENV_ADDR=fffff000)
U-Boot 1.1.1 (Feb 22 2008 - 18:48:54) Marvell version: 1.12.1 - TINY
Buffalo Version: 1.13-1.00
DRAM CS[0] base 0x00000000 size 128MB
DRAM Total size 128MB
[256kB@fffc0000] Flash: 256 kB
Addresses 20M - 0M are saved for the U-Boot usage.
Mem malloc Initialization (20M - 16M): Done
Soc: 88F5182 A2
CPU: ARM926 (Rev 0) running @ 400Mhz
Orion 1 streaming disabled
SysClock = 200Mhz , TClock = 166Mhz
USB 0: host mode
PCI 0: PCI Express Root Complex Interface
PCI 1: Conventional PCI, speed = 33000000
Net: egiga0 [PRIME]
Using 88E1118 phy
buffalo_change_power_status > Read 0x3a
buffalo_IsStopAtUbootStatus > MagicKey=0x3a
buffalo_change_power_status > Read 0x3a
buffalo_change_power_status > Read 0x3a
buffalo_change_power_status > Writing 0x5c
Please Press HDD power button to continue ...
buffalo_change_power_status > Read 0x5c
buffalo_change_power_status > Writing 0x3a
Marvell Serial ATA Adapter
Integrated Sata device found
Device 0: OK
Model: Hitachi HTS545050KTA300 Firm: BKFOC60M Ser#: 080426BK0F00VEG30JDA
Type: Hard Disk
Supports 48-bit addressing
Capacity: 476940.0 MB = 465.7 GB (976773168 x 512)
Device 1: OK
Model: Hitachi HTS545050KTA300 Firm: BKFOC60M Ser#: 080426BK0F00VEG30BXA
Type: Hard Disk
Supports 48-bit addressing
Capacity: 476940.0 MB = 465.7 GB (976773168 x 512)
Using device ide0, partition 1
Loading from block device ide device 0, partition 1: Name: hda1
Type: U-Boot File:/uImage.buffalo
1757600 bytes read
Image Name: Linux-2.6.16.16-arm1
Created: 2008-05-20 2:17:17 UTC
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 1757536 Bytes = 1.7 MB
Load Address: 00008000
Entry Point: 00008000
Using device ide0, partition 1
Loading from block device ide device 0, partition 1: Name: hda1
Type: U-Boot File:/initrd.buffalo
5650089 bytes read
Image Name: initrd
Created: 2008-05-20 2:18:09 UTC
Image Type: ARM Linux RAMDisk Image (gzip compressed)
Data Size: 5650025 Bytes = 5.4 MB
Load Address: 00000000
Entry Point: 00000000
Using device ide1, partition 1
Loading from block device ide device 1, partition 1: Name: hdb1
Type: U-Boot File:/uImage.buffalo
1757600 bytes read
Image Name: Linux-2.6.16.16-arm1
Created: 2008-05-20 2:17:17 UTC
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 1757536 Bytes = 1.7 MB
Load Address: 00008000
Entry Point: 00008000
Using device ide1, partition 1
Loading from block device ide device 1, partition 1: Name: hdb1
Type: U-Boot File:/initrd.buffalo
5650089 bytes read
Image Name: initrd
Created: 2008-05-20 2:18:09 UTC
Image Type: ARM Linux RAMDisk Image (gzip compressed)
Data Size: 5650025 Bytes = 5.4 MB
Load Address: 00000000
Entry Point: 00000000
Booting from Device 0
hit any key to switch tftp boot.
Hit any key to stop autoboot: 0
switched to TFTP boot.
Hit any key to stop autoboot: 0
Marvell>>
U-Boot settings
LS Mini: Serial Port Output - U-Boot
Settings
cat /proc/cpuinfo
Processor : ARM926EJ-Sid(wb) rev 0 (v5l) BogoMIPS : 266.24 Features : swp half thumb fastmult edsp java CPU implementer : 0x41 CPU architecture: 5TEJ CPU variant : 0x0 CPU part : 0x926 CPU revision : 0 Cache type : write-back Cache clean : cp15 c7 ops Cache lockdown : format C Cache format : Harvard I size : 32768 I assoc : 1 I line length : 32 I sets : 1024 D size : 32768 D assoc : 1 D line length : 32 D sets : 1024 Hardware : MV-88fxx81 Revision : 0000 Serial : 0000000000000000
cat /proc/meminfo
MemTotal: 126236 kB MemFree: 62112 kB Buffers: 100 kB Cached: 38176 kB SwapCached: 0 kB Active: 33444 kB Inactive: 19396 kB HighTotal: 0 kB HighFree: 0 kB LowTotal: 126236 kB LowFree: 62112 kB SwapTotal: 1003896 kB SwapFree: 1003896 kB Dirty: 36 kB Writeback: 0 kB Mapped: 21212 kB Slab: 7928 kB CommitLimit: 1067012 kB Committed_AS: 172968 kB PageTables: 696 kB VmallocTotal: 385024 kB VmallocUsed: 1040 kB VmallocChunk: 383984 kB
cat /proc/interrupts
CPU0 0: 9197 Mv Timer Tick 3: 351 serial 21: 45 eth0 29: 1180 mvSata 47: 0 FuncSw Err: 0
lsmod
Module Size Used by appletalk 38544 0 psnap 4516 1 appletalk llc 8372 1 psnap usblp 14784 0 usb_storage 59975 0 ehci_marvell_hcd 33480 0 usbcore 127240 4 usblp,usb_storage,ehci_marvell_hcd
cat /proc/buffalo/firmware
SERIES=LinkStation PRODUCTNAME=LS-WSGL/R1(SUJIN) VERSION=0.16 SUBVERSION=FLASH 0.00 PRODUCTID=0x00003002 BUILDDATE=2008/03/12 11:17:32 BOOTVER=1.13
mount
rootfs on / type rootfs (rw) /dev/root on / type xfs (rw) proc on /proc type proc (rw) sysfs on /sys type sysfs (rw) devpts on /dev/pts type devpts (rw) /dev/ram1 on /mnt/ram type tmpfs (rw) /dev/md0 on /boot type ext3 (rw,data=ordered) usbfs on /proc/bus/usb type usbfs (rw) /dev/md2 on /mnt/array1 type xfs (rw,noatime,sunit=128,swidth=256)
uname -r
2.6.16.16-arm1
cat /proc/cmdline
console=ttyS0,115200 root=/dev/sda2 rw initrd=0x00800040,15M panic=5 func=0 BOOT VER=1.13
cat /proc/mtd
dev: size erasesize name mtd0: 00040000 00001000 "phys_mapped_flash"
Partitions:
root@LS-WSGLBA4:/proc# cat partitions major minor #blocks name 8 0 488386584 sda 8 1 1004031 sda1 8 2 5004247 sda2 8 4 1 sda4 8 5 1004031 sda5 8 6 480480021 sda6 8 16 488386584 sdb 8 17 1004031 sdb1 8 18 5004247 sdb2 8 20 1 sdb4 8 21 1004031 sdb5 8 22 480480021 sdb6 31 0 256 mtdblock0 9 0 1003904 md0 9 10 1003904 md10 9 1 5004160 md1 9 2 960959872 md2
ls /proc
1 1516 5941 buffalo misc 1046 1566 600 bus modules 1049 1567 601 cmdline mounts 11 168 6012 cpu mtd 1172 169 6017 cpuinfo net 1173 1703 6018 crypto partitions 1263 192 6674 devices resource_dump 1303 2 6726 diskstats scsi 1310 3 6770 dma_copy self 1311 327 6774 driver slabinfo 1312 38 6790 execdomains stat 1319 39 6796 filesystems swaps 1333 4 6812 fs sys 1358 40 6824 interrupts sysvipc 1367 41 6850 iomem tty 1370 42 7918 ioports uptime 1486 43 847 kallsyms version 1487 44 8947 kmsg vmstat 1499 45 909 loadavg zoneinfo 1507 491 9655 locks 1510 494 9656 mdstat 1514 5 buddyinfo meminfo
cat /proc/buffalo/enet
MAC=00:1D:73:4C:XX:XX
link=100Mbps
duplex=full
jumboframe=enable
mtu=1500
regster9 value=0x0300
mode.config=auto:slave
mode.actual=master
=== for debug ===
page=0 0x1140 0x796d 0x0141 0x0e11 0x01e1 0x45e1 0x0005 0x2801
0x0000 0x0300 0x4000 0x0000 0x0000 0x0000 0x0000 0x3000
0x6060 0x6c08 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
0x0000 0x0000 0x0040 0x0000 0x0000 0x0000 0x0000 0x0000
page=1 0x1140 0x796d 0x0141 0x0e11 0x01e1 0x45e1 0x0005 0x2801
0x0000 0x0300 0x4000 0x0000 0x0000 0x0000 0x0000 0x3000
0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0001 0x0000
0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
page=2 0x1140 0x796d 0x0141 0x0e11 0x01e1 0x45e1 0x0005 0x2801
0x0000 0x0300 0x4000 0x0000 0x0000 0x0000 0x0000 0x3000
0x0288 0x0000 0x0000 0x0008 0x0000 0x1070 0x0002 0x0000
0x4705 0x0044 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
page=3 0x1140 0x796d 0x0141 0x0e11 0x01e1 0x45e1 0x0005 0x2801
0x0000 0x0300 0x4000 0x0000 0x0000 0x0000 0x0000 0x3000
0x0201 0x4401 0x4105 0x0073 0x0000 0x0000 0x0003 0x0000
0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
page=4 0x1140 0x796d 0x0141 0x0e11 0x01e1 0x45e1 0x0005 0x2801
0x0000 0x0300 0x4000 0x0000 0x0000 0x0000 0x0000 0x3000
0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0004 0x0000
0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
page=5 0x1140 0x796d 0x0141 0x0e11 0x01e1 0x45e1 0x0005 0x2801
0x0000 0x0300 0x4000 0x0000 0x0000 0x0000 0x0000 0x3000
0x80ff 0xa0ff 0x80ff 0x89ff 0x0000 0x2000 0x0005 0x0603
0x0000 0x0104 0x0f12 0x0a0c 0x0006 0x0000 0x0000 0x0000
page=6 0x1140 0x796d 0x0141 0x0e11 0x01e1 0x45e1 0x0005 0x2801
0x0000 0x0300 0x4000 0x0000 0x0000 0x0000 0x0000 0x3000
0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0006 0x0000
0x0000 0x0000 0x0010 0x0000 0x0000 0x0000 0x0000 0x0000
page=7 0x1140 0x796d 0x0141 0x0e11 0x01e1 0x45e1 0x0005 0x2801
0x0000 0x0300 0x4000 0x0000 0x0000 0x0000 0x0000 0x3000
0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0007 0x0000
0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
page=8 0x1140 0x796d 0x0141 0x0e11 0x01e1 0x45e1 0x0005 0x2801
0x0000 0x0300 0x4000 0x0000 0x0000 0x0000 0x0000 0x3000
0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0008 0x0000
0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
page=9 0x1140 0x796d 0x0141 0x0e11 0x01e1 0x45e1 0x0005 0x2801
0x0000 0x0300 0x4000 0x0000 0x0000 0x0000 0x0000 0x3000
0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0009 0x0000
0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
dmesg
Linux version 2.6.16.16-arm1 (root@I.You) (gcc version 3.4.4 (release) (CodeSourcery ARM 2005q3-2)) #316 Tue Jul 22 16:22:33 JST 2008 CPU: ARM926EJ-Sid(wb) [41069260] revision 0 (ARMv5TEJ) Machine: MV-88fxx81 Using UBoot passing parameters structure Sys Clk = 200000000, Tclk = 166664740 - Warning - This LSP release was tested only with U-Boot release 1.7.3 Memory policy: ECC disabled, Data cache writeback On node 0 totalpages: 32768 DMA zone: 32768 pages, LIFO batch:7 DMA32 zone: 0 pages, LIFO batch:0 Normal zone: 0 pages, LIFO batch:0 HighMem zone: 0 pages, LIFO batch:0 CPU0: D VIVT write-back cache CPU0: I cache: 32768 bytes, associativity 1, 32 byte lines, 1024 sets CPU0: D cache: 32768 bytes, associativity 1, 32 byte lines, 1024 sets Built 1 zonelists Kernel command line: console=ttyS0,115200 root=/dev/sda2 rw initrd=0x00800040,15M panic=5 func=0 BOOTVER=1.13 PID hash table entries: 1024 (order: 10, 16384 bytes) Console: colour dummy device 80x30 Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) Memory: 128MB 0MB 0MB 0MB = 128MB total Memory: 110620KB available (2992K code, 553K data, 112K init) Calibrating delay loop... 266.24 BogoMIPS (lpj=1331200) Mount-cache hash table entries: 512 CPU: Testing write buffer coherency: ok checking if image is initramfs...it isn't (no cpio magic); looks like an initrd Freeing initrd memory: 15360K NET: Registered protocol family 16 FLASH boardId = 19 Flash bankwidth 1, base ff800000, size 40000 BUFFALO LS_WSGL_R1 FLASH size 256[KB] Marvell Development Board (LSP Version 1.7.8_NAS)-- BUFFALO_BOARD_LS_WSGL_R1 Detected Tclk 166664740 and SysClk 200000000 Marvell USB EHCI Host controller #0: c16f5e00 Marvell USB EHCI Host controller #1: c16f5c00 pexBarOverlapDetect: winNum 2 overlap current 0 mvPexInit:Warning :Bar 2 size is illigal it will be disabled please check Pex and CPU windows configuration PCI: bus0: Fast back to back transfers enabled PCI: bus1: Fast back to back transfers enabled SCSI subsystem initialized use IDMA acceleration in copy to/from user buffers. used channels 2 and 3 Done. cesadev_init(c0011c44) Fast Floating Point Emulator V0.9 (c) Peter Teichmann. SGI XFS with large block numbers, no debug enabled Initializing Cryptographic API io scheduler noop registered (default) io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled serial8250: ttyS0 at MMIO 0x0 (irq = 3) is a 16550A serial8250: ttyS1 at MMIO 0x0 (irq = 4) is a 16550A RAMDISK driver initialized: 3 RAM disks of 16384K size 1024 blocksize loop: loaded (max 8 devices) Marvell Gigabit Ethernet Driver 'egiga': o Ethernet descriptors in DRAM o DRAM SW cache-coherency o Checksum offload enabled o Loading network interface ** egiga_init_module (0) 'eth0' Intergrated Sata device found scsi0 : Marvell SCSI to SATA adapter scsi1 : Marvell SCSI to SATA adapter ** BUFFALO Disable Command Queuing Function [0 0] ** ** BUFFALO Disable Command Queuing Function [0 1] ** Vendor: Hitachi Model: HTS545050KTA300 Rev: BKFO Type: Direct-Access ANSI SCSI revision: 03 Vendor: Hitachi Model: HTS545050KTA300 Rev: BKFO Type: Direct-Access ANSI SCSI revision: 03 Linux IAL (ERROR) : retry command host=0, bus=0 SCpnt = c1422ba0 SCSI device sda: 976773168 512-byte hdwr sectors (500108 MB) sda: Write Protect is off sda: Mode Sense: 23 00 00 00 SCSI device sda: drive cache: write back SCSI device sda: 976773168 512-byte hdwr sectors (500108 MB) sda: Write Protect is off sda: Mode Sense: 23 00 00 00 SCSI device sda: drive cache: write back sda: sda1 sda2 sda4 < sda5 sda6 > sd 0:0:0:0: Attached scsi disk sda Linux IAL (ERROR) : retry command host=1, bus=1 SCpnt = c1422ba0 SCSI device sdb: 976773168 512-byte hdwr sectors (500108 MB) sdb: Write Protect is off sdb: Mode Sense: 23 00 00 00 SCSI device sdb: drive cache: write back SCSI device sdb: 976773168 512-byte hdwr sectors (500108 MB) sdb: Write Protect is off sdb: Mode Sense: 23 00 00 00 SCSI device sdb: drive cache: write back sdb: sdb1 sdb2 sdb4 < sdb5 sdb6 > sd 1:0:0:0: Attached scsi disk sdb sd 0:0:0:0: Attached scsi generic sg0 type 0 sd 1:0:0:0: Attached scsi generic sg1 type 0 physmap flash device: 40000 at ff800000 CFI: Found no phys_mapped_flash device at location zero >jedec_probe Found: SST 39LF020 phys_mapped_flash: Found 1 x8 devices at 0x0 in 8-bit bank number of JEDEC chips: 1 cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness. cmdlinepart partition parsing not available RedBoot partition parsing not available mice: PS/2 mouse device common for all mice md: raid0 personality registered for level 0 md: raid1 personality registered for level 1 md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: bitmap version 4.39 Kernel event proc (C) BUFFALO INC. V.1.00 installed. MICON ctrl (C) BUFFALO INC. V.1.00 installed. mvGppValueSet: Err. An attempt to set output value to GPP 15 in input mode. Buffalo CPU Inerupts Driver (C) BUFFALO INC. Ver.0.01 alpha1 installed. mvGppValueSet: Err. An attempt to set output value to GPP 2 in input mode. Buffalo Gpio Control Driver (C) BUFFALO INC. Ver.0.02 installed. NET: Registered protocol family 2 IP route cache hash table entries: 2048 (order: 1, 8192 bytes) TCP established hash table entries: 8192 (order: 3, 32768 bytes) TCP bind hash table entries: 8192 (order: 3, 32768 bytes) TCP: Hash tables configured (established 8192 bind 8192) TCP reno registered TCP bic registered NET: Registered protocol family 1 NET: Registered protocol family 17 md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. RAMDISK: Compressed image found at block 0 VFS: Mounted root (ext2 filesystem). md: md10 stopped. md: md1 stopped. md: md0 stopped. md: bind<sdb1> md: bind<sda1> raid1: raid set md0 active with 2 out of 2 mirrors kjournald starting. Commit interval 5 seconds EXT3 FS on md0, internal journal EXT3-fs: mounted filesystem with ordered data mode. md: md10 stopped. md: bind<sdb5> md: bind<sda5> raid1: raid set md10 active with 2 out of 2 mirrors md: md1 stopped. md: bind<sdb2> md: bind<sda2> raid1: raid set md1 active with 2 out of 2 mirrors XFS mounting filesystem md1 Ending clean XFS mount for filesystem: md1 XFS mounting filesystem md1 Ending clean XFS mount for filesystem: md1 VFS: Mounted root (xfs filesystem). Trying to move old root to /initrd ... okay Freeing init memory: 112K Adding 1003896k swap on /dev/md10. Priority:-1 extents:1 across:1003896k kjournald starting. Commit interval 5 seconds EXT3 FS on md0, internal journal EXT3-fs: mounted filesystem with ordered data mode. usbcore: registered new driver usbfs usbcore: registered new driver hub ehci_platform ehci_platform.4523: EHCI Platform Host Controller ehci_platform ehci_platform.4523: new USB bus registered, assigned bus number 1 ehci_platform ehci_platform.4523: irq 17, io mem 0x00000000 ehci_platform ehci_platform.4523: USB 0.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 1 port detected ehci_platform ehci_platform.16781: EHCI Platform Host Controller ehci_platform ehci_platform.16781: new USB bus registered, assigned bus number 2 ehci_platform ehci_platform.16781: irq 12, io mem 0x00000000 ehci_platform ehci_platform.16781: USB 0.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 1 port detected Initializing USB Mass Storage driver... usbcore: registered new driver usb-storage USB Mass Storage support registered. usbcore: registered new driver usblp drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver eth0: link down eth0: link up<5>, full duplex<5>, speed 1 Gbps<5> md: md2 stopped. md: bind<sdb6> md: bind<sda6> md2: setting max_sectors to 128, segment boundary to 32767 raid0: looking at sda6 raid0: comparing sda6(480479936) with sda6(480479936) raid0: END raid0: ==> UNIQUE raid0: 1 zones raid0: looking at sdb6 raid0: comparing sdb6(480479936) with sda6(480479936) raid0: EQUAL raid0: FINAL 1 zones raid0: done. raid0 : md_size is 960959872 blocks. raid0 : conf->hash_spacing is 960959872 blocks. raid0 : nb_zone is 1. raid0 : Allocating 4 bytes for hash. XFS mounting filesystem md2 Ending clean XFS mount for filesystem: md2 BuffaloSwPollingCheck> SW_POWER_ON NET: Registered protocol family 5 eth0: change mtu 1500 (buffer-size 1520) to 9676 (buffer-size 9696) eth0: link down eth0: link up<5>, full duplex<5>, speed 1 Gbps<5>
df
Filesystem 1k-blocks Used Available Use% Mounted on /dev/md1 4993920 255660 4738260 5% / /dev/ram1 15360 112 15248 1% /mnt/ram /dev/md0 988088 116632 871456 12% /boot /dev/md2 480348864 3268 480345596 0% /mnt/array1
mount
rootfs on / type rootfs (rw) /dev/root on / type xfs (rw) proc on /proc type proc (rw) sysfs on /sys type sysfs (rw) devpts on /dev/pts type devpts (rw) /dev/ram1 on /mnt/ram type tmpfs (rw) /dev/md0 on /boot type ext3 (rw,data=ordered) usbfs on /proc/bus/usb type usbfs (rw) /dev/md2 on /mnt/array1 type xfs (rw,noatime)
smartctl -a /dev/sda (same for second drive)
smartctl version 5.37 [armv5tejl-unknown-linux-gnu] Copyright (C) 2002-6 Bruce Allen Home page is http://smartmontools.sourceforge.net/ === START OF INFORMATION SECTION === Device Model: Hitachi HTS545050KTA300 Serial Number: 080227BK0F00VEG0H--A Firmware Version: BKFOC60M User Capacity: 500,107,862,016 bytes Device is: Not in smartctl database [for details use: -P showall] ATA Version is: 8 ATA Standard is: Not recognized. Minor revision code: 0x42 Local Time is: Fri Jul 25 23:42:28 2008 JST SMART support is: Available - device has SMART capability. SMART support is: Disabled SMART Disabled. Use option -s with argument 'on' to enable it.
smartctl -A /dev/sda (sync in progress, note temperature)
=== START OF READ SMART DATA SECTION === SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000b 100 100 062 Pre-fail Always - 0 2 Throughput_Performance 0x0005 100 100 040 Pre-fail Offline - 0 3 Spin_Up_Time 0x0007 236 236 033 Pre-fail Always - 1 4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 14 5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 0 7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0 8 Seek_Time_Performance 0x0005 100 100 040 Pre-fail Offline - 0 9 Power_On_Hours 0x0012 100 100 000 Old_age Always - 1 10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 14 191 G-Sense_Error_Rate 0x000a 100 100 000 Old_age Always - 0 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 12 193 Load_Cycle_Count 0x0012 100 100 000 Old_age Always - 143 194 Temperature_Celsius 0x0002 096 096 000 Old_age Always - 57 (Lifetime Min/Max 25/57) 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0 197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 0 223 Load_Retry_Count 0x000a 100 100 000 Old_age Always - 0
reboot procedure
Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(1,0) <0>Rebooting in 90 seconds.. BuffaloChangePowerStatusBeforeHalt > Check power status. MagicKey = 24 BuffaloChangePowerStatusBeforeHalt > Changed to 43 from 24
