Lighttpd - Compile & Run on MIPSel Linkstation (LS2) - Revision history

Jonli447 at 01:53, 11 September 2007

Jonli447 — Tue, 11 Sep 2007 01:53:09 GMT

← Older revision		Revision as of 01:53, 11 September 2007
Line 4:		Line 4:

	Download and install the development tools		Download and install the development tools
-	[http://~~linkstationwiki~~.~~net~~/index.php?title=Precompiled_C_development_environment%2C_running_on_the_LS#MIPSel Precompiled C Development Environment]	+	[http://nas-central.org/index.php?title=Precompiled_C_development_environment%2C_running_on_the_LS#MIPSel Precompiled C Development Environment]

	Download the Lighttpd source code and untar it to a directory to do the compiling in.		Download the Lighttpd source code and untar it to a directory to do the compiling in.
Line 105:		Line 105:
	I hope this is usefull to someone.		I hope this is usefull to someone.

-	The Precompiled package I made can be downloaded from here for those of you who don't want to compile it yourself... [http://downloads.~~linkstationwiki~~.~~net~~/packages/mips/lighttpd-1.4.12_mips.tar.gz lighttpd-1.4.12_mips.tar.gz]	+	The Precompiled package I made can be downloaded from here for those of you who don't want to compile it yourself... [http://downloads.nas-central.org/packages/mips/lighttpd-1.4.12_mips.tar.gz lighttpd-1.4.12_mips.tar.gz]

SimonD at 21:01, 5 October 2006

SimonD — Thu, 05 Oct 2006 21:01:09 GMT

← Older revision		Revision as of 21:01, 5 October 2006
Line 102:		Line 102:
	</pre>		</pre>

-	All Done! The server can now serve Large Files.	+	All Done! The server can now serve Large Files.<br>
	I hope this is usefull to someone.		I hope this is usefull to someone.
		+
		+	The Precompiled package I made can be downloaded from here for those of you who don't want to compile it yourself... [http://downloads.linkstationwiki.net/packages/mips/lighttpd-1.4.12_mips.tar.gz lighttpd-1.4.12_mips.tar.gz]

Ramuk at 20:24, 5 October 2006

Ramuk — Thu, 05 Oct 2006 20:24:22 GMT

← Older revision		Revision as of 20:24, 5 October 2006
Line 1:		Line 1:
		+	{{Articles\|LS2}}
	Due to the lack of Large File support (>2Gb) in the built in thttpd installation on my Linkstation (LS2) I decided to try [http://lighttpd.net Lighttpd] instead.		Due to the lack of Large File support (>2Gb) in the built in thttpd installation on my Linkstation (LS2) I decided to try [http://lighttpd.net Lighttpd] instead.
	Below is the steps I used to compile and install Lighttpd on my Linkstation.		Below is the steps I used to compile and install Lighttpd on my Linkstation.

SimonD: How To Compile & run Lighttpd on the LS2

SimonD — Thu, 05 Oct 2006 20:09:54 GMT

How To Compile & run Lighttpd on the LS2

← Older revision	Revision as of 20:09, 5 October 2006
Line 1:	Line 1:
	+	Due to the lack of Large File support (>2Gb) in the built in thttpd installation on my Linkstation (LS2) I decided to try [http://lighttpd.net Lighttpd] instead.
	+	Below is the steps I used to compile and install Lighttpd on my Linkstation.

	+	Download and install the development tools
	+	[http://linkstationwiki.net/index.php?title=Precompiled_C_development_environment%2C_running_on_the_LS#MIPSel Precompiled C Development Environment]
	+
	+	Download the Lighttpd source code and untar it to a directory to do the compiling in.
	+
	+	<pre>
	+	wget http://lighttpd.net/download/lighttpd-1.4.12.tar.gz
	+	mkdir lighttpd
	+	cd lighttpd
	+	tar xzvf ../lighttpd-1.4.12.tar.gz
	+	</pre>
	+
	+	The Lighttpd web site states that there are additional libraries needed. However they do not appear to be needed if you do not need some of the modules. See [http://trac.lighttpd.net/trac/wiki/OptionalLibraries Optional Libraries]
	+	The libraries I was missing are "libpcre" and "libz".
	+
	+	Configure the Compilation package to install the files to the /usr/local directory and compile the program.
	+
	+	<pre>
	+	./configure
	+	make
	+	make install
	+	</pre>
	+
	+	Copy the full config file to the right directory ...
	+
	+	<pre>
	+	mkdir /etc/lighttpd/
	+	cp doc/lighttpd.conf /etc/lighttpd/lighttpd.conf
	+	</pre>
	+
	+	Write a simple test config file (/tmp/lighttpd.conf)...
	+
	+	<pre>
	+	server.document-root = "/www/"
	+	server.port = 3000
	+	mimetype.assign = (
	+	".html" => "text/html",
	+	".txt" => "text/plain",
	+	".jpg" => "image/jpeg",
	+	".png" => "image/png"
	+	)
	+	</pre>
	+
	+	Check the simple test config file...
	+
	+	<pre>
	+	/usr/local/sbin/lighttpd -t -f /tmp/lighttpd.conf
	+	</pre>
	+
	+	If all is well, Run the simple test config...
	+
	+	<pre>
	+	/usr/local/sbin/lighttpd -D -f /tmp/lighttpd.conf
	+	</pre>
	+
	+	look at ... the page in web browser by pointing your web browser to...
	+
	+	<pre>
	+	http://serverIP:3000/
	+	</pre>
	+
	+	Press CTRL^C to terminate the process...
	+
	+	Next you need to Edit the full config file.
	+
	+	<pre>
	+	vi /etc/lighttpd/lighttpd.conf
	+	</pre>
	+
	+	NOTE:-If you do not have "libpcre" during the compile then you need to comment out the following lines in the .conf file...
	+
	+	<pre>
	+	#$HTTP["url"] =~ "\.pdf$" {
	+	# server.range-requests = "disable"
	+	#}
	+	</pre>
	+
	+	Check the full config and then test it...
	+
	+	<pre>
	+	/usr/local/sbin/lighttpd -t -f /etc/lighttpd/lighttpd.conf
	+
	+	/usr/local/sbin/lighttpd -D -f /etc/lighttpd/lighttpd.conf
	+	</pre>
	+
	+	Assuming all is well then you can create a startup process to automatically run the daemon at startup.
	+
	+	<pre>
	+	echo "/usr/local/sbin/lighttpd -f /etc/lighttpd/lighttpd.conf" > /etc/init.d/lighttpd
	+	chmod +x /etc/init.d/lighttpd
	+
	+	cd /etc/rc.d/rc2.d/
	+	ln -s ../init.d/lighttpd S90lighttpd
	+	cd /etc/rc.d/rc0.d/
	+	ln -s ../init.d/lighttpd K90lighttpd
	+	cd /etc/rc.d/rc6.d/
	+	ln -s ../init.d/lighttpd K90lighttpd
	+	</pre>
	+
	+	All Done! The server can now serve Large Files.
	+	I hope this is usefull to someone.

SimonD: Trash moved to Lighttpd - Compile & Run on MIPSel Linkstation (LS2)

SimonD — Thu, 05 Oct 2006 20:09:15 GMT

Trash moved to Lighttpd - Compile & Run on MIPSel Linkstation (LS2)

← Older revision

Revision as of 20:09, 5 October 2006

SimonD: Compile Lighttpd for MIPSel Linkstation moved to Trash

SimonD — Thu, 05 Oct 2006 20:07:52 GMT

Compile Lighttpd for MIPSel Linkstation moved to Trash

← Older revision

Revision as of 20:07, 5 October 2006

SimonD at 20:07, 5 October 2006

SimonD — Thu, 05 Oct 2006 20:07:11 GMT

← Older revision		Revision as of 20:07, 5 October 2006
Line 1:		Line 1:
-	~~Due to the lack of Large File support (>2Gb) in the built in thttpd installation on my Linkstation (LS2) I decided to try [http://lighttpd.net Lighttpd] instead.~~
-	~~Below is the steps I used to compile and install Lighttpd on my Linkstation.~~

-	~~Download and install the development tools~~
-	~~[http://linkstationwiki.net/index.php?title=Precompiled_C_development_environment%2C_running_on_the_LS#MIPSel Precompiled C Development Environment]~~
-
-	~~Download the Lighttpd source code and untar it to a directory to do the compiling in.~~
-
-	~~<pre>~~
-	~~wget http://lighttpd.net/download/lighttpd-1.4.12.tar.gz~~
-	~~mkdir lighttpd~~
-	~~cd lighttpd~~
-	~~tar xzvf ../lighttpd-1.4.12.tar.gz~~
-	~~</pre>~~
-
-	The Lighttpd web site states that there are additional libraries needed. However they do not appear to be needed if you do not need some of the modules. See [http://trac.lighttpd.net/trac/wiki/OptionalLibraries Optional Libraries]
-	~~The libraries I was missing are "libpcre" and "libz".~~
-
-	~~Configure the Compilation package to install the files to the /usr/local directory and compile the program.~~
-
-	~~<pre>~~
-	~~./configure~~
-	~~make~~
-	~~make install~~
-	~~</pre>~~
-
-	~~Copy the full config file to the right directory ...~~
-
-	~~<pre>~~
-	~~mkdir /etc/lighttpd/~~
-	~~cp doc/lighttpd.conf /etc/lighttpd/lighttpd.conf~~
-	~~</pre>~~
-
-	~~Write a simple test config file (/tmp/lighttpd.conf)...~~
-
-	~~<pre>~~
-	~~server.document-root = "/www/"~~
-	~~server.port = 3000~~
-	~~mimetype.assign = (~~
-	~~".html" => "text/html",~~
-	~~".txt" => "text/plain",~~
-	~~".jpg" => "image/jpeg",~~
-	~~".png" => "image/png"~~
-	)
-	~~</pre>~~
-
-	~~Check the simple test config file...~~
-
-	~~<pre>~~
-	~~/usr/local/sbin/lighttpd -t -f /tmp/lighttpd.conf~~
-	~~</pre>~~
-
-	~~If all is well, Run the simple test config...~~
-
-	~~<pre>~~
-	~~/usr/local/sbin/lighttpd -D -f /tmp/lighttpd.conf~~
-	~~</pre>~~
-
-	~~look at ... the page in web browser by pointing your web browser to...~~
-
-	~~<pre>~~
-	~~http://serverIP:3000/~~
-	~~</pre>~~
-
-	~~Press CTRL^C to terminate the process...~~
-
-	~~Next you need to Edit the full config file.~~
-
-	~~<pre>~~
-	~~vi /etc/lighttpd/lighttpd.conf~~
-	~~</pre>~~
-
-	~~NOTE:-If you do not have "libpcre" during the compile then you need to comment out the following lines in the .conf file...~~
-
-	~~<pre>~~
-	~~#$HTTP["url"] =~ "\.pdf$" {~~
-	~~# server.range-requests = "disable"~~
-	#}
-	~~</pre>~~
-
-	~~Check the full config and then test it...~~
-
-	~~<pre>~~
-	~~/usr/local/sbin/lighttpd -t -f /etc/lighttpd/lighttpd.conf~~
-
-	~~/usr/local/sbin/lighttpd -D -f /etc/lighttpd/lighttpd.conf~~
-	~~</pre>~~
-
-	~~Assuming all is well then you can create a startup process to automatically run the daemon at startup.~~
-
-	~~<pre>~~
-	~~echo "/usr/local/sbin/lighttpd -f /etc/lighttpd/lighttpd.conf" > /etc/init.d/lighttpd~~
-	~~chmod +x /etc/init.d/lighttpd~~
-
-	~~cd /etc/rc.d/rc2.d/~~
-	~~ln -s ../init.d/lighttpd S90lighttpd~~
-	~~cd /etc/rc.d/rc0.d/~~
-	~~ln -s ../init.d/lighttpd K90lighttpd~~
-	~~cd /etc/rc.d/rc6.d/~~
-	~~ln -s ../init.d/lighttpd K90lighttpd~~
-	~~</pre>~~
-
-	~~All Done! The server can now serve Large Files.~~
-	~~I hope this is usefull to someone.~~

81.179.148.40: How To Compile & run Lighttpd on the LS2

81.179.148.40 — Thu, 05 Oct 2006 19:57:08 GMT

How To Compile & run Lighttpd on the LS2

New page

Due to the lack of Large File support (>2Gb) in the built in thttpd installation on my Linkstation (LS2) I decided to try [http://lighttpd.net Lighttpd] instead.
Below is the steps I used to compile and install Lighttpd on my Linkstation.

Download and install the development tools
[http://linkstationwiki.net/index.php?title=Precompiled_C_development_environment%2C_running_on_the_LS#MIPSel Precompiled C Development Environment]

Download the Lighttpd source code and untar it to a directory to do the compiling in.

<pre>
wget http://lighttpd.net/download/lighttpd-1.4.12.tar.gz
mkdir lighttpd
cd lighttpd
tar xzvf ../lighttpd-1.4.12.tar.gz
</pre>

The Lighttpd web site states that there are additional libraries needed. However they do not appear to be needed if you do not need some of the modules. See [http://trac.lighttpd.net/trac/wiki/OptionalLibraries Optional Libraries]
The libraries I was missing are "libpcre" and "libz".

Configure the Compilation package to install the files to the /usr/local directory and compile the program.

<pre>
./configure
make
make install
</pre>

Copy the full config file to the right directory ...

<pre>
mkdir /etc/lighttpd/
cp doc/lighttpd.conf /etc/lighttpd/lighttpd.conf
</pre>

Write a simple test config file (/tmp/lighttpd.conf)...

<pre>
server.document-root = "/www/"
server.port = 3000
mimetype.assign = (
".html" => "text/html",
".txt" => "text/plain",
".jpg" => "image/jpeg",
".png" => "image/png"
)
</pre>

Check the simple test config file...

<pre>
/usr/local/sbin/lighttpd -t -f /tmp/lighttpd.conf
</pre>

If all is well, Run the simple test config...

<pre>
/usr/local/sbin/lighttpd -D -f /tmp/lighttpd.conf
</pre>

look at ... the page in web browser by pointing your web browser to...

<pre>
http://serverIP:3000/
</pre>

Press CTRL^C to terminate the process...

Next you need to Edit the full config file.

<pre>
vi /etc/lighttpd/lighttpd.conf
</pre>

NOTE:-If you do not have "libpcre" during the compile then you need to comment out the following lines in the .conf file...

<pre>
#$HTTP["url"] =~ "\.pdf$" {
# server.range-requests = "disable"
#}
</pre>

Check the full config and then test it...

<pre>
/usr/local/sbin/lighttpd -t -f /etc/lighttpd/lighttpd.conf

/usr/local/sbin/lighttpd -D -f /etc/lighttpd/lighttpd.conf
</pre>

Assuming all is well then you can create a startup process to automatically run the daemon at startup.

<pre>
echo "/usr/local/sbin/lighttpd -f /etc/lighttpd/lighttpd.conf" > /etc/init.d/lighttpd
chmod +x /etc/init.d/lighttpd

cd /etc/rc.d/rc2.d/
ln -s ../init.d/lighttpd S90lighttpd
cd /etc/rc.d/rc0.d/
ln -s ../init.d/lighttpd K90lighttpd
cd /etc/rc.d/rc6.d/
ln -s ../init.d/lighttpd K90lighttpd
</pre>

All Done! The server can now serve Large Files.
I hope this is usefull to someone.