Difference between revisions of "Linkstation Hardware"
(→Rear View) |
(→Rear View) |
||
| Line 176: | Line 176: | ||
</tr> | </tr> | ||
<tr> | <tr> | ||
| − | <td><b> | + | <td><b>LS2 and HG</b></td> |
| − | <td><b> | + | <td><b>LS1</b></td> |
</tr> | </tr> | ||
<tr> | <tr> | ||
<td> | <td> | ||
| − | The powerpc-hdhlan LinkStation can also be identified by the presence of a crossover switch located at the rear of the unit; the mipsel-hdhlan and powerpc-hdhglan LinkStations do not have a crossover switch as they are auto-switching. | + | The powerpc-hdhlan (LS1) LinkStation can also be identified by the presence of a crossover switch located at the rear of the unit; the mipsel-hdhlan (LS2) and powerpc-hdhglan (HG) LinkStations do not have a crossover switch as they are auto-switching. |
</td> | </td> | ||
</tr> | </tr> | ||
Revision as of 14:39, 24 June 2006
.jpg)
Contents
Difference between LS1, LS2, HG, HS
If the firmware version is 1.xx then you have a ppc-based-Linkstation (LS1, HG, HS), if it is 2.xx it is an LS2 (mips).
all LS except the HG have autosensing, so no switch for changing the LAN-Port is there.
Crossover switch -> LS1 No Crossoverswitch + Firmware Version 2.xx -> LS2 No Crossoverswitch + Firmware Version 1.xx -> HG or HS
TODO: Find a difference between HG & HS. I expect differences in the webinterface (pcast & upnp)
Hardware Table
| Type | LS1 | LS1 | KURO | LS1 | LS2 | ? | HG | KUROHG |
| HD-LAN V1 | HD-LAN V2 | KURO-BOX | HD-HLAN V1 | HD-HLAN V2 | HD-HLWG | HD-HGLAN | KURO-BOX/HG | |
| CPU | PowerPC | PowerPC | PowerPC | PowerPC | MIPS | MIPS | PowerPC | PowerPC |
| CPU Clock | 200MHz | 200MHz | 200MHz | 200MHz | unconfirmed | unconfirmed | 266MHz | 266MHz |
| FLASH ROM | 16MB | 4MB | 4MB | 4MB | unconfirmed | unconfirmed | 4MB | 4MB |
| D-RAM | 64MB | 64MB | 64MB | 64MB | unconfirmed | unconfirmed | 128MB | 128MB |
| USB Port | - | - | 1 | 2 | 2 | unconfirmed | 2 | 2 |
| MiniPCI | 1 | - *1 | - | - | unconfirmed | unconfirmed | - | - |
| Network | 10BASE-T 100BASE-TX |
10BASE-T 100BASE-TX |
10BASE-T 100BASE-TX |
10BASE-T 100BASE-TX |
10BASE-T 100BASE-TX |
10BASE-T 100BASE-TX IEEE802.11g/b |
10BASE-T 100BASE-TX 1000BASE-T |
10BASE-T 100BASE-TX 1000BASE-T |
| Newest Japanese firmware |
1.24(a) 1,Jun.2004 |
2.13(a) 1,Jun.2004 |
1.02 20,Apr.2004 |
1.45 22,Sep.2004 |
2.11 22,Sep.2004 |
- - |
1.33 22,Feb.2005 |
1.01 19.Nov.2004 |
*1: There are some which have a MiniPCI slot depending on a lot.
From the Why don't you hack the LinkStation/KURO-BOX site
Firmware version
Maintainance \ SystemStatus should list your firmware version.
http://<linkstation-Ip>/cgi-bin/sysinfo.cgi
is the direct link.
Rear View
|
|
|
| LS2 and HG | LS1 |
|
The powerpc-hdhlan (LS1) LinkStation can also be identified by the presence of a crossover switch located at the rear of the unit; the mipsel-hdhlan (LS2) and powerpc-hdhglan (HG) LinkStations do not have a crossover switch as they are auto-switching. |
Buffalo Links
http://www.buffalotech.com/products/linkstationchart.php
Hardware Overview
Linkstation Information
A collection of information/benchmarks for the Linkstations
- Linkstation Information</nowiki>
