Non-destructive method for loading a new kernel
From NAS-Central Buffalo - The Linkstation Wiki
(Difference between revisions)
m |
|||
| (5 intermediate revisions not shown) | |||
| Line 1: | Line 1: | ||
| - | <font color=red>PowerPC Only | This kernel loading method only works for the powerpc-hdhlan and powerpc-hdhglan LinkStations; it does '''not''' work for the mipsel-hdhlan LinkStation | + | {{Template:Articles}} |
| + | ''<font color=red><small> | ||
| + | This article | ||
| + | Based on work by frontalot and timtimred. | ||
| + | Originally by timtimred. | ||
| + | at Linkstationwiki.org | ||
| + | </small></font>''<br> | ||
| + | |||
| + | {{Postit|PowerPC Only | This kernel loading method only works for the powerpc-hdhlan and powerpc-hdhglan LinkStations; it does '''not''' work for the mipsel-hdhlan LinkStation}} | ||
This article details a non-destructive (no flashing required) method for loading a new kernel. We will use a special kernel module which loads a new kernel in real-time. We assume that you already have a working [[Projects/OpenLink]] or [[Projects/FreeLink]] installation. | This article details a non-destructive (no flashing required) method for loading a new kernel. We will use a special kernel module which loads a new kernel in real-time. We assume that you already have a working [[Projects/OpenLink]] or [[Projects/FreeLink]] installation. | ||
| - | * Download and install the appropriate [[Projects/KernelModules|additional kernel modules]] package for your LinkStation. You may download and manually install them from the [[http://downloads. | + | * Download and install the appropriate [[Projects/KernelModules|additional kernel modules]] package for your LinkStation. You may download and manually install them from the [[http://downloads.nas-central.org downloads area]] or automatically install them via the [[http://ipkg.nas-central.org/ ipkg feed]]. |
| - | * Download and extract a precompiled kernel. You may obtain one from the [[http://downloads. | + | * Download and extract a precompiled kernel. You may obtain one from the [[http://downloads.nas-central.org downloads area]] or use an existing Kuro Box kernel. Kuro Box kernels work on the powerpc-hdhlan LinkStation while Kuro Box HG kernels work on the powerpc-hdhglan LinkStation. Remember that the kernel must be in binary form: |
objcopy -O binary vmlinux | objcopy -O binary vmlinux | ||
| Line 15: | Line 23: | ||
uname -a | uname -a | ||
| - | * You will need to load the new kernel after each reboot. A special thanks goes out to Jochang for writing this wonderful kernel loader. You may obtain the loader.o source code from [[http://downloads. | + | * You will need to load the new kernel after each reboot. A special thanks goes out to Jochang for writing this wonderful kernel loader. You may obtain the loader.o source code from [[http://downloads.nas-central.org here]] or directly from [[http://jan.csie.ntu.edu.tw/~jo/kuro/ Jochang's web site]]. |
| + | |||
| + | [[Category:General]] | ||
| + | [[Category:Kernel]] | ||
| + | [[Category:LS1]] | ||
| + | [[Category:HG]] | ||
Latest revision as of 02:03, 11 September 2007
This article
Based on work by frontalot and timtimred.
Originally by timtimred.
at Linkstationwiki.org
| PowerPC Only |
|
| This kernel loading method only works for the powerpc-hdhlan and powerpc-hdhglan LinkStations; it does not work for the mipsel-hdhlan LinkStation |
This article details a non-destructive (no flashing required) method for loading a new kernel. We will use a special kernel module which loads a new kernel in real-time. We assume that you already have a working Projects/OpenLink or Projects/FreeLink installation.
- Download and install the appropriate additional kernel modules package for your LinkStation. You may download and manually install them from the [downloads area] or automatically install them via the [ipkg feed].
- Download and extract a precompiled kernel. You may obtain one from the [downloads area] or use an existing Kuro Box kernel. Kuro Box kernels work on the powerpc-hdhlan LinkStation while Kuro Box HG kernels work on the powerpc-hdhglan LinkStation. Remember that the kernel must be in binary form:
objcopy -O binary vmlinux
- Then load the new kernel using the special loader.o kernel module (adjust directories as necessary):
cd /lib/modules/2.4.17_mvl21-sandpoint sync; modprobe loader kernel=/boot/vmlinux
- Wait a few seconds then log in to your LinkStation and verify that it's using the new kernel:
uname -a
- You will need to load the new kernel after each reboot. A special thanks goes out to Jochang for writing this wonderful kernel loader. You may obtain the loader.o source code from [here] or directly from [Jochang's web site].
