Difference between revisions of "Non-destructive method for loading a new kernel"
Revision as of 00:39, 23 July 2006
Based on work by frontalot and timtimred.
Originally by timtimred.
|This kernel loading method only works for the powerpc-hdhlan and powerpc-hdhglan LinkStations; it does not work for the mipsel-hdhlan LinkStation|
This article details a non-destructive (no flashing required) method for loading a new kernel. We will use a special kernel module which loads a new kernel in real-time. We assume that you already have a working Projects/OpenLink or Projects/FreeLink installation.
- Download and install the appropriate additional kernel modules package for your LinkStation. You may download and manually install them from the [downloads area] or automatically install them via the [ipkg feed].
- Download and extract a precompiled kernel. You may obtain one from the [downloads area] or use an existing Kuro Box kernel. Kuro Box kernels work on the powerpc-hdhlan LinkStation while Kuro Box HG kernels work on the powerpc-hdhglan LinkStation. Remember that the kernel must be in binary form:
objcopy -O binary vmlinux
- Then load the new kernel using the special loader.o kernel module (adjust directories as necessary):
cd /lib/modules/2.4.17_mvl21-sandpoint sync; modprobe loader kernel=/boot/vmlinux
- Wait a few seconds then log in to your LinkStation and verify that it's using the new kernel: