Performance tune the LinkStation hard drive with Hdparm

From NAS-Central Buffalo - The Linkstation Wiki

(Difference between revisions)
Jump to: navigation, search
Line 1: Line 1:
-
<center><font color=red>''Originally by frontalot from linkstationwiki.org''</font></center>
+
{{Template:Articles}}<center><font color=red>''Originally by frontalot from linkstationwiki.org''</font></center>
1. Install hdparm if you haven't already:
1. Install hdparm if you haven't already:

Revision as of 21:58, 20 July 2006

Originally by frontalot from linkstationwiki.org

1. Install hdparm if you haven't already: 

apt-get install hdparm

2. Open up the hdparm configuration file and modify the performance settings: 

pico /etc/hdparm.conf

3. Change the default ROOTFS settings to: 

ROOTFS = /dev/hda

4. Add the following information at the end of hdparm.conf: 

command_line {
hdparm -q[1] -m16[2] -c1[3] -u1[4] -S250[5] /dev/hda
}

5. Test your old performance settings: 

hdparm -tT /dev/hda

6. Reboot your LinkStation and retest your performance settings. Tada!

7. These particular settings may not always improve performance - try testing different settings.

Notes

  1. ↑ q tells hdparm to change the settings quietly.
  2. ↑ m16 sets the number of sectors to use for IDE block mode (multicount).
  3. ↑ c1 sets I/O support to 32-bit (from 16-bit).
  4. ↑ u1 enables unmasking of interrupts.
  5. ↑ S250 sets a spindown time of 5 hours.
Retrieved from "http://buffalo.nas-central.org/wiki/Performance_tune_the_LinkStation_hard_drive_with_Hdparm"
Personal tools