Removing the info share

From NAS-Central Buffalo - The Linkstation Wiki
Revision as of 15:42, 30 June 2007 by Andre (Talk | contribs)

Jump to: navigation, search

Contents

Why this article?

On the original and modified stockfirmwares we always have a some default shares. The normal "share" is not the problem, but "info" is as you cannot get rid of it. This article describes how to deal with that problem.

LS1/LS2/HG/HS with Openlink

Description of the mechanism

mkcode!!

Solutions

Automatic removal of the info share

Disabling updating of smb.conf

there already is another article about this!

LSPro/LSLive with stock or modified stock firmware

Description of the mechanism

nas_configgen!!

Solutions

getting access with acp_commander!!

With sed

cp -a /etc/samba/smb.conf /etc/samba/smb.orig sed '/^\[info\]/,/guest ok = yes/d ; /^###info###/d' /etc/samba/smb.orig > /etc/samba/smb.conf

Paste that after line 20 in the /etc/init.d/smb.sh - info share is removed on restart, and every restart thereafter.

With a perl script

Sources:

http://search.cpan.org/~sscotto/File-Samba-0.03/lib/File/Samba.pm

http://search.cpan.org/~gaas/Data-Dump-1.08/lib/Data/Dump.pm


Install:

Extract tarball ([1]) to /

Add the following line to "/etc/init.d/smb.sh" after "/usr/local/sbin/nas_configgen -c samba":

/usr/local/bin/removeinfoshare.pl

Configure SMB through the WebUI as normal.


Tarball Contents:

/usr/local/lib/perl5/5.8.8/Data/Dump.pm

/usr/local/lib/perl5/5.8.8/File/Samba.pm

/usr/local/bin/removeinfoshare.pl

removeinfoshare_readme