From NAS-Central Buffalo - The Linkstation Wiki

Revision as of 07:32, 17 July 2006 (view source) Ramuk (Talk | contribs) m ← Older edit		Latest revision as of 02:31, 14 August 2006 (view source) Ramuk (Talk | contribs) m
(3 intermediate revisions not shown)
Line 1:		Line 1:
		+	{{Template:Articles}}
	''<font color=red><small>		''<font color=red><small>
	This article		This article
Line 5:		Line 6:
	at Linkstationwiki.org		at Linkstationwiki.org
	</small></font>''<br>		</small></font>''<br>
-		+	{{Freelink-Roadmap}}
-	== 1.11 ==	+
-		+
-		+
-	*'''used as a base image'''	+
-		+
-	== 1.2 ==	+
-		+
-		+
-	*'''fixed some bugs of 1.11 reported in the [[PITS/PITS]]'''	+
-		+
-		+
-	== 1.3 ==	+
-		+
-		+
-	*'''unclear...make some suggestions'''	+
-		+
	[[Category:General]]		[[Category:General]]
	[[Category:Development]]		[[Category:Development]]
	[[Category:FreeLink]]		[[Category:FreeLink]]

---

Latest revision as of 02:31, 14 August 2006

This article Based on work by moomoo. Originally by mindbender.. at Linkstationwiki.org

Contents 1 Roadmap of FreeLink Development 2 Versions in Development 3 Beta Versions 3.1 FreeLink_arm9-1.0rev2 3.1.1 @@ CURRENT STATUS FOR THE LS-GL (PRO) @@ 3.2 FreeLink v1.0 (arm9) 3.3 freelink_mipsel-hdhlan-060810 3.3.1 @@ CURRENT STATUS FOR LS2 @@ 3.3.2 freelink_mipsel-hdhlan-070801 4 Released Stable Versions 4.1 freelink_powerpc-hdhlan-1.11 4.1.1 @@ CURRENT STATUS FOR LS1 @@ 4.1.2 powerpc-hdhlan-freelink-1.1 4.1.3 powerpc-hdhlan-freelink-1.0 4.1.4 powerpc-hdhlan-freelink-0.2 4.1.5 powerpc-hdhlan-freelink-0.1 4.2 freelink_powerpc-hdhglan-1.11 4.2.1 @@ CURRENT STATUS FOR HG @@ 4.2.2 powerpc-hdhglan-freelink-1.1 4.2.3 powerpc-hdhglan-freelink-1.0

Roadmap of FreeLink Development

GREEN: status of FreeLink for the LS1

BROWN: status of FreeLink for the LS2

BLUE: status of FreeLink for the HG

RED: status of FreeLink for the LS-GL (PRO)

Versions in Development

Beta Versions

FreeLink_arm9-1.0rev2

@@ CURRENT STATUS FOR THE LS-GL (PRO) @@

FreeLink v1.0 (arm9)

freelink_mipsel-hdhlan-060810

@@ CURRENT STATUS FOR LS2 @@

• This has been packaged up as a image.dat suitable for flashing.

WARNING! There is a possibility that you could brick your NAS with these instructions. Please make sure that you read the entire page carefully.

• FreeLink for MIPSel:download
• From the Forums: Freelink for the mips - Testers required
• Refer to The LinkStation firmware flasher article for Firmware Updater HowTos.
• Info about this:
  • image.dat password = 1NIf_2yUOlRDpYZUVNqboRpMBoZwT4PzoUvOPUp6l (As required by the firmware updater)
  • It has a static IP assigned to 192.168.11.150
  • root password = "freelink"
  • ssh enabled (no telnet as default)
• avr_evtd ver 1.61 - Fully functioning including s/w shutdown/restart, emergency telnet on port 1234 (just two clicks of the reset button).
  • Note: The operation of the reset button for the avr_evtd daemon has changed. This now, with proper setup, allows the user to enter EM-Mode. Please refer to AVR watch-dog daemon for Linkstation for more information.

Installed applications:

gcc
libc-dev
libc6-dev
make
nano
 avr_evtd
ssh

freelink_mipsel-hdhlan-070801

Released Stable Versions

freelink_powerpc-hdhlan-1.11

@@ CURRENT STATUS FOR LS1 @@

• Added Japanese updater
• Adjusted /etc/melco/info
• Upgraded to kernel-modules-2.4.17_mvl21-sandpoint-2.0
• Updated documentation
• Fixed VNC & xterm issue (PITS bug 00047)

powerpc-hdhlan-freelink-1.1

• DHCP now works (PITS bug 00022)
• Corrected /lib/libls.so symbolic link
• Modified linkstation_version.txt to dipslay 1.99 (to avoid potential confusion)
• Resolved various ownership issues

powerpc-hdhlan-freelink-1.0

• Corrected Perl version mismatch (PITS bug 00030)
• Added additional kernel modules (kernel-modules-2.4.17_mvl21-sandpoint)
• Removed /bin/write_ng
• Removed /bin/write_ok
• Removed SSH (user should install)
• Fixed AVR (PITS bug 00018)
• Corrected /etc/inittab (PITS bug 00019)
• Added flash bank devices (PITS bug 00023)
• Corrected Debian release (PITS bug 00026)
• Now can flash new firmware without using “write_ng”
• Minor documentation update

powerpc-hdhlan-freelink-0.2

• Added /etc/melco files
• Added utelnetd 0.1.9
• Added linkstation_release (fixes firmware 1.06 bug)
• Corrected various ppc_uartd problems
• Now installs without any errors
• Power button/AVR still not fully functional

powerpc-hdhlan-freelink-0.1

• Initial release.
• LinkStation firmware 1.51 (Japanese release)
• Debian Sarge 07/25/05

freelink_powerpc-hdhglan-1.11

@@ CURRENT STATUS FOR HG @@

• Added Japanese updater
• Adjusted /etc/melco/info
• Upgraded to kernel-modules-2.4.17_mvl21-sandpoint-2.0
• Upgraded to LinkStation firmware 1.46b2 (Japanese release)
• Updated documentation
• Fixed VNC & xterm issue (PITS bug 00047)

powerpc-hdhglan-freelink-1.1

• DHCP now works (PITS bug 00022)
• Corrected /lib/libls.so symbolic link
• Modified linkstation_version.txt to dipslay 1.99 (to avoid potential confusion)
• Resolved various ownership issues
• Added additional kernel modules (kernel-modules-2.4.20_hglan_htgl)
• Now uses English language HD-HGLAN FWUpdate.exe

powerpc-hdhglan-freelink-1.0

• Initial release
• LinkStation firmware 1.45b (Japanese release)
• Debian Sarge 08/24/05