S.M.A.R.T. hard drive monitoring

From NAS-Central Buffalo - The Linkstation Wiki

(Difference between revisions)
Jump to: navigation, search
m
Line 1: Line 1:
{{Template:Articles}}
{{Template:Articles}}
 +
<small><font color=red>''Originally by frontalot from linkstationwiki.org''</font></small>
1. Install the SMART monitoring tools:
1. Install the SMART monitoring tools:
Line 27: Line 28:
[[Category:Debian]]
[[Category:Debian]]
-
 
-
<center><font color=red>''Originally by frontalot from linkstationwiki.org''</font></center>
 

Revision as of 03:55, 24 September 2006

Originally by frontalot from linkstationwiki.org 1. Install the SMART monitoring tools: 

apt-get install smartmontools

2. I recommend enabling the SMART daemon which will automatically monitor the LinkStation hard drive and report any serious problems. Edit /etc/default/smartmontools: 

start_smartd=yes

3. Smartd, the SMART daemon, will now automatically initiate on boot and monitor the hard drive.

4. Now edit the smartd config file, /etc/smartd.conf: 

comment out: DEVICESCAN
add: /dev/hda -a -H -m root

5. This enables monitoring of /dev/hda only and reports any hardware failures via mail to root. You can also use the following commands: 

report drive information: smartctl -i /dev/hda
report drive health: smartctl -Hc /dev/hda

6. You can display the temperature of your internal drive (the last number is the current temperature): 

smartctl -a /dev/hda | grep 194

7. A more detailed listing of smartmontools commands are available at http://www.linuxjournal.com/node/6983/print.

Retrieved from "http://buffalo.nas-central.org/wiki/S.M.A.R.T._hard_drive_monitoring"
Personal tools