Serial port

From NAS-Central Buffalo - The Linkstation Wiki

(Difference between revisions)
Jump to: navigation, search
m (→Buy a TTL/RS232 or TTL/USB interface)
m (→Level Shifter)
Line 41: Line 41:
==Level Shifter==
==Level Shifter==
 +
You will also need a 4 pin header
 +
[[Image:4pinheader.gif]]
 +
* [http://www.mouser.com/search/ProductDetail.aspx?R=929400-01-04virtualkey51750000virtualkey517-929400-01-04 Mouser PN: 517-929400-01-04 ]
 +
* [http://www.futurlec.com/Connectors/HEADS4.shtml Futurelec PN: HEADS4]
 +
===Build your own TTL/RS232 or TTL/USB interface===
===Build your own TTL/RS232 or TTL/USB interface===
*  TTL/RS232 - [[Building a Custom Serial Interface]]
*  TTL/RS232 - [[Building a Custom Serial Interface]]

Revision as of 19:19, 3 October 2007

Model Specific Directions

How to add Serial Access
LS1 HD-HLAN v1
 For the LS1
KURO/HG KUROBOX
For Kuro/HG
HG HD-HGLAN
For the HG
LS2 HD-HLAN v2
For the LS2
LSPRO
LS-GL
Use Bottom Slot
KUROPRO KUROBOX Pro

Level Shifter

You will also need a 4 pin header Image:4pinheader.gif

Build your own TTL/RS232 or TTL/USB interface

Buy a TTL/RS232 or TTL/USB interface

The cheapest TTL/RS232 converter uses a MAX232 with two serial channels for standard TTL 3V input. The cheapest TTL/USB converter uses a chip by FTDI (the same chip is used in the SCON-KIT )
This board is made by Futurelec, however the order is shipped from Thailand so it takes 2-3 weeks to get it. This cable is made by FTDI, but the pinout at the connector end would need to be reassigned. Spec Sheet w/ pinout, wire colors & other info

Others Others

This disambiguation page lists articles associated with the same title. If an internal link led you here, you may wish to change the link to point directly to the intended article.
Retrieved from "http://buffalo.nas-central.org/wiki/Serial_port"
Personal tools