Difference between revisions of "Serial port"

From NAS-Central Buffalo - The Linkstation Wiki
Jump to: navigation, search
m (Buy a TTL/RS232 or TTL/USB interface)
m (Buy a TTL/RS232 or TTL/USB interface)
Line 64: Line 64:
 
||
 
||
 
<small>
 
<small>
* $0.32 - [http://www.mouser.com/search/ProductDetail.aspx?R=929400-01-04virtualkey51750000virtualkey517-929400-01-04 Mouser PN: 517-929400-01-04 ]
+
* $0.32 - [http://www.mouser.com/search/ProductDetail.aspx?R=929400-01-04virtualkey51750000virtualkey517-929400-01-04 Mouser Part # 517-929400-01-04 ]
 
* $20.00 - [http://www.mouser.com/search/ProductDetail.aspx?R=TTL-232R-3V3virtualkey62620000virtualkey626-DLP-TTL-232R-3V3  Mouser Part # 626-DLP-TXRX-G]
 
* $20.00 - [http://www.mouser.com/search/ProductDetail.aspx?R=TTL-232R-3V3virtualkey62620000virtualkey626-DLP-TTL-232R-3V3  Mouser Part # 626-DLP-TXRX-G]
 
** £11.10 - [http://apple.clickandbuild.com/cnb/shop/ftdichip?productID=53&op=catalogue-product_info-null&prodCategoryID=47    TTL-232R-3V3 from the  FTDI Chip Shop]</small>
 
** £11.10 - [http://apple.clickandbuild.com/cnb/shop/ftdichip?productID=53&op=catalogue-product_info-null&prodCategoryID=47    TTL-232R-3V3 from the  FTDI Chip Shop]</small>

Revision as of 19:32, 3 October 2007

Model Specific Directions

Power-architecture-logo.png MIPS Logo color.png ARM Logo hires.png How to add Serial Access
LS1 HD-HLAN v1
HD-H(G).jpg
For the LS1
KURO/HG KUROBOX
Kuro-box.jpg
For Kuro/HG
HG HD-HGLAN
HD-H(G).jpg
For the HG
LS2 HD-HLAN v2
HD-H(G).jpg
For the LS2
LSPRO
LS-GL
LS-Pro.jpg
Use Bottom Slot
KUROPRO KUROBOX Pro
Kuro-box pro.jpg

Level Shifter

Build your own TTL/RS232 or TTL/USB interface

Buy a TTL/RS232 or TTL/USB interface

The cheapest TTL/RS232 converter uses a MAX232 with two serial channels for standard TTL 3V input. The cheapest TTL/USB converter uses a chip by FTDI (the same chip is used in the SCON-KIT )
ET-MINI RS232 3V.jpg MM232R.jpg
This board is made by Futurelec, however the order is shipped from Thailand so it takes 2-3 weeks to get it. This cable is made by FTDI, but the pinout at the connector end would need to be reassigned. Spec Sheet w/ pinout, wire colors & other info

You will also need a 4 pin header 4pinheader.gif

Others Others