Difference between revisions of "Serial port"

From NAS-Central Buffalo - The Linkstation Wiki
Jump to: navigation, search
m (Buy a TTL/RS232 or TTL/USB interface)
m (Buy a TTL/RS232 or TTL/USB interface)
Line 65: Line 65:
 
<small>
 
<small>
 
* $4.90 - [http://www.futurlec.com/Mini_RS232_TTL_3V.shtml Futurelec: RS232 to TTL-3V Converter Mini Board]
 
* $4.90 - [http://www.futurlec.com/Mini_RS232_TTL_3V.shtml Futurelec: RS232 to TTL-3V Converter Mini Board]
* $0.70 - [http://www.futurlec.com/Connectors/HEADS4.shtml HEADS4 - 4 Pin .100" Straight Male Headers - Single Row]
+
* $0.70 - [http://www.futurlec.com/Connectors/HEADS4.shtml Futurelec: HEADS4 - 4 Pin .100" Straight Male Headers - Single Row]
 
* $0.15 - [http://www.futurlec.com/Connectors/HDCONNS4pr.shtml Futurelec: HDCONNS4 - 4 Pin .100" Header Connector]
 
* $0.15 - [http://www.futurlec.com/Connectors/HDCONNS4pr.shtml Futurelec: HDCONNS4 - 4 Pin .100" Header Connector]
 
* $0.15 - [http://www.futurlec.com/Connectors/HDCONNS6.shtml Futurelec: HDCONNS6 - 6 Pin .100" Header Connector - Single Row]
 
* $0.15 - [http://www.futurlec.com/Connectors/HDCONNS6.shtml Futurelec: HDCONNS6 - 6 Pin .100" Header Connector - Single Row]

Revision as of 19:49, 3 October 2007

Model Specific Directions

Power-architecture-logo.png MIPS Logo color.png ARM Logo hires.png How to add Serial Access
LS1 HD-HLAN v1
HD-H(G).jpg
For the LS1
KURO/HG KUROBOX
Kuro-box.jpg
For Kuro/HG
HG HD-HGLAN
HD-H(G).jpg
For the HG
LS2 HD-HLAN v2
HD-H(G).jpg
For the LS2
LSPRO
LS-GL
LS-Pro.jpg
Use Bottom Slot
KUROPRO KUROBOX Pro
Kuro-box pro.jpg

Level Shifter

Build your own TTL/RS232 or TTL/USB interface

Buy a TTL/RS232 or TTL/USB interface

The cheapest TTL/RS232 converter uses a MAX232 with two serial channels for standard TTL 3V input. The cheapest TTL/USB converter uses a chip by FTDI (the same chip is used in the SCON-KIT )
ET-MINI RS232 3V.jpg MM232R.jpg
This board is made by Futurelec, however the order is shipped from Thailand so it takes 2-3 weeks to get it.

You'll also need some headers and connectors

This cable is made by FTDI, but the pinout at the connector end would need to be reassigned. Spec Sheet w/ pinout, wire colors & other info

You will also need a 4 pin header 4pinheader.gif

Others Others