Serial port
From NAS-Central Buffalo - The Linkstation Wiki
(Difference between revisions)
m |
m |
||
| Line 32: | Line 32: | ||
|| | || | ||
* [[Add a Serial port to the ARM9 Linkstation| Use bottom slot with friction fit connector]] | * [[Add a Serial port to the ARM9 Linkstation| Use bottom slot with friction fit connector]] | ||
| - | * [[ | + | * [[Use a Nokia Serial Cable on an ARM9 Linkstation| Solder cable directly to circuit board]] |
|- | |- | ||
|| '''KUROPRO''' | || '''KUROPRO''' | ||
Revision as of 04:39, 14 June 2008
Model Specific Directions
| 
| 
| How to add Serial Access | ||
|---|---|---|---|---|---|
| LS1 | HD-HLAN v1 | .jpg){kind=small} | For the LS1 | ||
| KURO/HG | KUROBOX |  | For Kuro/HG | ||
| HG | HD-HGLAN | | For the HG | ||
| LS2 | HD-HLAN v2 | | For the LS2 | ||
| LSPRO | LS-GL |  | |||
| KUROPRO | KUROBOX Pro |  | |||
| TERASTATION | Terastation |  | |||
Level Shifter
Build your own TTL/RS232 or TTL/USB interface
- TTL/RS232 - Building a Custom Serial Interface
- TTL/USB - Use a cheap phone sync cable with the serial port
Buy a TTL/RS232 or TTL/USB interface
| The cheapest TTL/RS232 converter uses a MAX232 with two serial channels for standard TTL 3V input. | The cheapest TTL/USB converter uses a chip by FTDI (the same chip is used in the SCON-KIT ) |
|---|---|
| 
|
| This board is made by Futurelec, however the order is shipped from Thailand so it takes 2-3 weeks to get it.
You'll also need some headers and connectors | This cable is made by FTDI, but the pinout at the connector end would need to be reassigned. Spec Sheet w/ pinout, wire colors & other info
You will also need a 4 pin header
|
|
Parts List
|
Parts List
|
| Others | Others |
|
|
|
| This disambiguation page lists articles associated with the same title. If an internal link led you here, you may wish to change the link to point directly to the intended article. |
