Serial port
From NAS-Central Buffalo - The Linkstation Wiki
.jpg){kind=small}
Model Specific Directions
PPC
MIPSel
ARM9
- Add a Serial port to the ARM9 Linkstation or KuroBoxPro
- Add a Serial port to the ARM9 KuroBoxPro with the SCON-KIT
Level Shifter
Build your own TTL/RS232 or TTL/USB interface
- TTL/RS232 - Building a Custom Serial Interface
- TTL/USB - Use a cheap phone sync cable with the serial port
Buy a TTL/RS232 or TTL/USB interface
| The cheapest TTL/RS232 converter uses a MAX232 with two serial channels for standard TTL 3V input. | The cheapest TTL/USB converter uses a chip by FTDI (the same chip is used in the SCON-KIT ) |
|---|---|
| 
|
| This board is made by Futurelec, however the order is shipped from Thailand so it takes 2-3 weeks to get it. | This cable is made by FTDI, but the pinout at the connector end would need to be reassigned |
|
|
|
| Others | Others |
|
|
|
| This disambiguation page lists articles associated with the same title. If an internal link led you here, you may wish to change the link to point directly to the intended article. |
