Serial port

From NAS-Central Buffalo - The Linkstation Wiki
Revision as of 16:16, 29 August 2007 by Ramuk (Talk | contribs)

Jump to: navigation, search

Model Specific Directions

Power-architecture-logo.png MIPS Logo color.png ARM Logo hires.png How to add Serial Access
LS1 HD-HLAN v1
HD-H(G).jpg
For the LS1
KURO/HG KUROBOX
Kuro-box.jpg
For Kuro/HG
HG HD-HGLAN
HD-H(G).jpg
[[Add a Serial port to the PowerPC Linkstation]| For the HG]]
LS2 HD-HLAN v2
HD-H(G).jpg
For the LS2
LSPRO
LS-GL
LS-Pro.jpg
Use Bottom Slot
KUROPRO KUROBOX Pro
Kuro-box pro.jpg

Level Shifter

Build your own TTL/RS232 or TTL/USB interface

Buy a TTL/RS232 or TTL/USB interface

The cheapest TTL/RS232 converter uses a MAX232 with two serial channels for standard TTL 3V input. The cheapest TTL/USB converter uses a chip by FTDI (the same chip is used in the SCON-KIT )
ET-MINI RS232 3V.jpg MM232R.jpg
This board is made by Futurelec, however the order is shipped from Thailand so it takes 2-3 weeks to get it. This cable is made by FTDI, but the pinout at the connector end would need to be reassigned

Others Others