Serial port
From NAS-Central Buffalo - The Linkstation Wiki
Revision as of 11:28, 28 September 2007 by Ramuk (Talk | contribs) (→Buy a TTL/RS232 or TTL/USB interface)
Model Specific Directions
![]() |
![]() |
![]() |
How to add Serial Access | ||
---|---|---|---|---|---|
LS1 | HD-HLAN v1 | For the LS1 | |||
KURO/HG | KUROBOX | For Kuro/HG | |||
HG | HD-HGLAN | For the HG | |||
LS2 | HD-HLAN v2 | For the LS2 | |||
LSPRO |
LS-GL | Use Bottom Slot | |||
KUROPRO | KUROBOX Pro |
Level Shifter
Build your own TTL/RS232 or TTL/USB interface
- TTL/RS232 - Building a Custom Serial Interface
- TTL/USB - Use a cheap phone sync cable with the serial port
Buy a TTL/RS232 or TTL/USB interface
The cheapest TTL/RS232 converter uses a MAX232 with two serial channels for standard TTL 3V input. | The cheapest TTL/USB converter uses a chip by FTDI (the same chip is used in the SCON-KIT ) |
---|---|
![]() |
![]() |
This board is made by Futurelec, however the order is shipped from Thailand so it takes 2-3 weeks to get it. | This cable is made by FTDI, but the pinout at the connector end would need to be reassigned. Spec Sheet w/ pinout, wire colors & other info |
|
|
Others | Others |
|
|