Difference between revisions of "SuccessStories"
Mindbender (Talk | contribs) m (→Mindbender) |
Kenatonline (Talk | contribs) |
||
(48 intermediate revisions by 15 users not shown) | |||
Line 1: | Line 1: | ||
{{Template:Articles}} | {{Template:Articles}} | ||
− | <big> | + | <big>Please post your accomplishments with your Buffalo devices here. New entries should be added to the end.</big> |
<table width =100%><tr><td align=left> | <table width =100%><tr><td align=left> | ||
__TOC__</td><td align=right> | __TOC__</td><td align=right> | ||
Line 9: | Line 9: | ||
==[[User:Mindbender|Mindbender]]== | ==[[User:Mindbender|Mindbender]]== | ||
08:46, 6 July 2006 (EDT) | 08:46, 6 July 2006 (EDT) | ||
− | + | ||
− | + | ||
Model: Linkstation 1 | Model: Linkstation 1 | ||
* Bootloader: UBoot 2.01 (LNI) | * Bootloader: UBoot 2.01 (LNI) | ||
− | * | + | * running 2.4.33.3 + telnet/ftp/root-enabled firmimg.bin in flash |
+ | * foonas svn 1062 + 2.6.22 on hdd | ||
* 1 Printer in Front-USB-Port | * 1 Printer in Front-USB-Port | ||
* 2 USB-HDDs via a USB-Hub in the Back-USB-Port | * 2 USB-HDDs via a USB-Hub in the Back-USB-Port | ||
* soldered header for JTAG + i have a JTAG cable created by tampakuro | * soldered header for JTAG + i have a JTAG cable created by tampakuro | ||
− | What | + | What I use it for: |
* Kernel-NFS - recording from my [[dbox2]] | * Kernel-NFS - recording from my [[dbox2]] | ||
Line 26: | Line 26: | ||
* vsftp-server | * vsftp-server | ||
* SVN-Server | * SVN-Server | ||
+ | |||
+ | Model: Linkstation 1 | ||
+ | |||
+ | * Bootloader: UBoot 2.01 (LNI) | ||
+ | * Development box for testing | ||
Model: Linkstation Pro | Model: Linkstation Pro | ||
− | * | + | * FreeLink |
* serial-access | * serial-access | ||
+ | * Development box for testing | ||
+ | |||
+ | Model: Kurobox HG | ||
+ | |||
+ | * JTAG headers soldered - unbricked via JTAG | ||
==[[User:Flavoie|Flavoie]]== | ==[[User:Flavoie|Flavoie]]== | ||
Line 54: | Line 64: | ||
Retire x86 debian server setup with the following software and use Linkstation instead: | Retire x86 debian server setup with the following software and use Linkstation instead: | ||
* Wiki for hockey team | * Wiki for hockey team | ||
− | |||
− | |||
==[[User:Ramuk|Ramuk]]== | ==[[User:Ramuk|Ramuk]]== | ||
− | [[User:Ramuk|Ramuk]] | + | [[User:Ramuk|Ramuk]] 17:38, 14 August 2008 (BST) |
Models: | Models: | ||
− | * [[w:Linkstation|Linkstation]] [[:Category:HG|HG]] 250 | + | *[[w:Linkstation|Linkstation]] [[:Category:HG|HG]] 250 |
**[[:Category:FreeLink|Freelink]] powerpc hdhglan 1.11 | **[[:Category:FreeLink|Freelink]] powerpc hdhglan 1.11 | ||
− | **Linux LinkStation [[:Category:Kernel|2.6. | + | **Linux LinkStation [[:Category:Kernel|2.6.23.14 #52]] |
− | *Kuro [[Kuroboxwiki:Kurobox_Hardware_and_Description|HG]] | + | *Kuro [[Kuroboxwiki:Kurobox_Hardware_and_Description|HG]] 750 |
**[[:Category:FreeLink|Freelink]] powerpc hdhglan 1.11 | **[[:Category:FreeLink|Freelink]] powerpc hdhglan 1.11 | ||
− | **Linux LinkStation [[:Category:Kernel|2.6.20.2-kuroboxHG ]] | + | **Linux LinkStation [[:Category:Kernel|2.6.20.2-kuroboxHG]] |
− | *Kuro [[ | + | *Kuro [[Kuroboxwiki:Kurobox_Hardware_and_Description|HG]] 180 |
− | **[[:Category: | + | **[[:Category:OpenLink|OpenLink]] 0.73b |
+ | **[[U-boot bootloader]] | ||
+ | **Linux (none) [[:Category:Kernel|2.6.25.15-svn365-dirty375 #21]] | ||
+ | *Kuro [[KuroBoxPro|Pro]] 320 | ||
+ | **[[Armel Debian for the Kurobox Pro - Manual install]] | ||
+ | **Kernel 2.6.26 | ||
+ | *Kuro [[KuroBoxPro|Pro]] 80 | ||
+ | **[[Armel Debian for the Kurobox Pro - Manual install]] | ||
+ | **Kernel 2.6.25.6 | ||
What I use them for: | What I use them for: | ||
Line 165: | Line 181: | ||
==[[User:Jimlennon|Jimlennon]]== | ==[[User:Jimlennon|Jimlennon]]== | ||
− | 08:18, | + | 08:18, 21 January 2009 (CET) |
− | Model: Linkstation | + | Model: Linkstation Live 1000 |
− | * latest freelink for | + | * latest freelink for LSPro |
− | What | + | What I use it for: |
− | * SMB fileserver | + | * SMB/NFS fileserver |
* Filesharing - with Mldonkey using sancho gui | * Filesharing - with Mldonkey using sancho gui | ||
* Web server - with Apache, PHP & MySQL | * Web server - with Apache, PHP & MySQL | ||
* Web based configuration - with Webmin | * Web based configuration - with Webmin | ||
* FTP server - with Proftpd | * FTP server - with Proftpd | ||
− | * | + | * MRTG |
− | + | ||
− | + | ||
− | + | ||
− | + | Harddisk upgraded from 500GB to 1000GB (WD Caviar Green - WD10EADS) | |
− | + | ||
==[[User:kuroguy|Kuroguy]]== | ==[[User:kuroguy|Kuroguy]]== | ||
Line 204: | Line 216: | ||
* Test upcoming U-Boot port | * Test upcoming U-Boot port | ||
* Ship it off to the next hacker in line | * Ship it off to the next hacker in line | ||
− | |||
− | |||
− | |||
==[[user:davy_gravy|Davy Gravy]]== | ==[[user:davy_gravy|Davy Gravy]]== | ||
Line 216: | Line 225: | ||
*Flashed the KuroHG and one LS-HG w/ UBoot | *Flashed the KuroHG and one LS-HG w/ UBoot | ||
*Flashed that LS-HG w/ 2.4.33.3 kernel/firmimg.bin | *Flashed that LS-HG w/ 2.4.33.3 kernel/firmimg.bin | ||
− | *moved away from the Buffalo-Installer to [http://forum. | + | *moved away from the Buffalo-Installer to [http://forum.nas-central.org/index.php?action=vthread&forum=9&topic=1753| Kuro-style installs] w/ roomy hda1 partitions |
*hda3 partitions w/ [[Using_XFS_instead_of_ext3_%28network_performance_boost%29|XFS]] and [[JFS_Installation_or_Conversion_for_Boosting_Performance|JFS]] filesystem formats]], since they give a higher transfer rate - around 12.5MB/sec sustained | *hda3 partitions w/ [[Using_XFS_instead_of_ext3_%28network_performance_boost%29|XFS]] and [[JFS_Installation_or_Conversion_for_Boosting_Performance|JFS]] filesystem formats]], since they give a higher transfer rate - around 12.5MB/sec sustained | ||
Line 225: | Line 234: | ||
*run hpodder each morning for our favorite podcasts via Roku | *run hpodder each morning for our favorite podcasts via Roku | ||
*running [[Mediaripper_-_Automatically_Rip_Audio_CDs_to_MP3s|Mediaripper]] on for automated MP3 conversion | *running [[Mediaripper_-_Automatically_Rip_Audio_CDs_to_MP3s|Mediaripper]] on for automated MP3 conversion | ||
+ | |||
+ | I picked up a used LS1 on eBay for about $25: | ||
+ | *put U-Boot, foonas, and foonas-em on it | ||
+ | *added Transmission (bittorrent client) and p910nd (printserver) | ||
+ | *use it in tandem w/ a Buffalo Router (running Tomato) | ||
+ | *these two devices replace my Apple AirPort BaseStation Extreme | ||
The KuroHG is used for: | The KuroHG is used for: | ||
Line 232: | Line 247: | ||
Next steps: | Next steps: | ||
*Sell the 2nd HG that is still stock - I don't need it anymore - now that I see what one can do w/ FreeLink, the stock firmware seems crippled, to me... | *Sell the 2nd HG that is still stock - I don't need it anymore - now that I see what one can do w/ FreeLink, the stock firmware seems crippled, to me... | ||
− | *Buy a LS-Pro/ARM box and learn more | + | *OK, Debian is nice, but something more fitting for an NAS device, like foonas, is more interesting. |
− | + | *Buy a LS-Pro/ARM box and learn more (July 2008 - OK, I did that, and lately I've made a Netconsole UBoot for LSPro boxes, & a Debian/Armel image for LSPro's and KuroPro's) | |
− | + | ||
− | + | ||
==[[User:Bauldrick|Bauldrick]]== | ==[[User:Bauldrick|Bauldrick]]== | ||
− | |||
Line 254: | Line 266: | ||
* HP Photosmart 7550 in front usb port | * HP Photosmart 7550 in front usb port | ||
* Xi-tel HI-FI link [[Add_a_USB_sound_card#Insert_the_usb_sound_card | usb soundcard]] in back usb port | * Xi-tel HI-FI link [[Add_a_USB_sound_card#Insert_the_usb_sound_card | usb soundcard]] in back usb port | ||
− | |||
What I use it for: | What I use it for: | ||
Line 266: | Line 277: | ||
* Listen to my music over internet with gnump3d | * Listen to my music over internet with gnump3d | ||
* Additional Applaunchpage - for links and to be able to start and stop some apps over the browser | * Additional Applaunchpage - for links and to be able to start and stop some apps over the browser | ||
− | |||
==[[User:Artion|Artion]]== | ==[[User:Artion|Artion]]== | ||
Line 287: | Line 297: | ||
* FTP server | * FTP server | ||
* Webmail - OpenWebMail | * Webmail - OpenWebMail | ||
− | |||
− | |||
==[[User:Dougal|Dougal]]== | ==[[User:Dougal|Dougal]]== | ||
Line 310: | Line 318: | ||
* Domain name and email server | * Domain name and email server | ||
* Backup of Box A www/db and media files | * Backup of Box A www/db and media files | ||
− | |||
I retired an AMD AthlonXP 1800 running WinXP in favour of these boxes :) | I retired an AMD AthlonXP 1800 running WinXP in favour of these boxes :) | ||
+ | |||
+ | ==[[User:timtim|timtim]]== | ||
+ | |||
+ | Currently Using: | ||
+ | |||
+ | * u-boot 1.2.0 with fdt via OpenEmbedded for PowerPC Linkstations | ||
+ | * foonas as main distro and foonas-em in flash | ||
+ | |||
+ | Responsible for: | ||
+ | |||
+ | * Adding Buffalo NAS devices and many other platforms to OpenEmbedded (LSPro, KuroPro, LS1, LS2, HG) | ||
+ | * foonas distribution | ||
+ | * foonas-em distribution - first 2.6 based em-mode utilities in flash for PowerPC and MIPSel based linkstations with next gen filesystem support | ||
+ | * foonas-iscsi distribution | ||
+ | * Managing [http://www.foonas.org foonas.org] and [http://www.nas-central.org nas-central.org] | ||
+ | |||
+ | All my NAS devices are currently being used for foonas/foonas-em/foonas-iscsi development. | ||
+ | |||
+ | ==[[User:Lessrand|Lessrand]]== | ||
+ | 17:14, 24 Jan 2008 (CET) | ||
+ | |||
+ | 2 x LS HS (400GB harddisk) . Both boxes running FreeLink. | ||
+ | |||
+ | Model: Linkstation HS No. 1 | ||
+ | |||
+ | What i use it for: | ||
+ | * ssh backup server | ||
+ | * twonkyvision mediaserver | ||
+ | |||
+ | Model: Linkstation HS No. 2 | ||
+ | |||
+ | What i use it for: | ||
+ | * ssh backup server | ||
+ | * svn server | ||
+ | |||
+ | ==[[User:Sparrowhawk|Sparrowhawk]]== | ||
+ | 12:15, 24 February 2008 (CST) | ||
+ | <br> | ||
+ | Linkstation Pro V1 | ||
+ | <br> | ||
+ | Reflashed to Freelink | ||
+ | <br> | ||
+ | Expanded files and all reset to ext3 filesystem. | ||
+ | <br> | ||
+ | Updated Kernel, Installed Webmin, Samba and Firefly. | ||
+ | <br> | ||
+ | Stream my .mp3 files to RhythmBox on my Debian Etch Computer. | ||
+ | <br> | ||
+ | All my photos as .jpg are accessed by Samba on my home network. | ||
+ | |||
+ | ==[[User:CavesOfTQLT|CavesOfTQLT]]== | ||
+ | 21:24, 25 February 2008 (GMT) | ||
+ | |||
+ | Kurobox HG WR: | ||
+ | Hardware: | ||
+ | * Seagate Barracuda 200GB HDD | ||
+ | |||
+ | Software: | ||
+ | * Boot-loader: U-Boot 1.2.0 | ||
+ | * EM system: foonas-em 0.0.8-r2 | ||
+ | * kernel: 2.6.24.2 | ||
+ | * OS: Gentoo | ||
+ | |||
+ | Function: To run [http://www.slimdevices.com SlimDevices]' SlimServer music-streaming server application 24/7. | ||
+ | |||
+ | Speciality software: | ||
+ | * Squeezecenter 7.0 beta | ||
+ | * Samba - for music file transfer | ||
+ | |||
+ | Future: | ||
+ | * To replace the HDD with something larger as, with all my music being in lossless flac format, I only have about 5% free space. | ||
+ | * Possibly get another Kuro or similar and hack away coz the past month or so has got me hooked again... | ||
+ | |||
+ | ==[[User:JonSenior|JonSenior]]== | ||
+ | 7 January 2009 | ||
+ | |||
+ | Linkstation Live v2 (1TB): | ||
+ | * Kernel 2.6.28 | ||
+ | * USB Sound card | ||
+ | * mpd | ||
+ | * Print server (With connected Samsung ML-1640): Works both as postscript and raw queue, although it takes while as postscript (~2mins to print test page from CUPS!). Avoid Canon CAPT printers (e.g. LBP-2900) as these will not work with raw queue and the drivers are x86 only. | ||
+ | * File server: Mounting of shares using NFS and sshfs possible. NFS is used within the network and sshfs can be used for external connections. Music succesfully "streamed" from Paris to Edinburgh! | ||
+ | |||
+ | Function: To play music in a manner controllable from any of my computers. General file storage. Print server. | ||
+ | |||
+ | ==[[User:Tmorehen|Tmorehen]]== | ||
+ | 11:19PM 8 January 2009 (EDT) | ||
+ | |||
+ | '''Model: Linkstation 1''' | ||
+ | |||
+ | * Openlink 0.52b | ||
+ | * print server | ||
+ | * NTP timeserver | ||
+ | * byRequest media server for TiVo | ||
+ | * no longer in use | ||
+ | |||
+ | '''Model: Kurobox HG''' | ||
+ | |||
+ | * Customized version of Openlink 0.73b | ||
+ | * supports unlimited number of USB hard drives (I've mounted and shared 5) | ||
+ | * all flash drives supported (at least all I've tested) | ||
+ | * able to use web interface to hide /mnt folders from Samba and Appletalk | ||
+ | * 500GB hard drive | ||
+ | * Filesharing (music files, pictures, all downloads from internet | ||
+ | * NTP time server for 6 networked computers | ||
+ | * IMAP e-mail server, which allows us to access our e-mail from all local computers | ||
+ | * Fetchmail collects e-mail from 9 different accounts | ||
+ | * Spambayes is used to filter out spam (very effective) | ||
+ | * Dovecot is the IMAP server | ||
+ | * FTP, Telnet and sshd running | ||
+ | |||
+ | '''Model: Kurobox HG''' | ||
+ | |||
+ | * Customized Openlink 0.73b as above | ||
+ | * 350 GB hard drive | ||
+ | * development system | ||
+ | * has all the development tools to compile and install above software | ||
+ | * runs standard Kurobox kernel and kernel 2.6 | ||
+ | * runs Samba 2 and Samba 3 | ||
+ | * recent work was to complete the mkcode, mkshinfo, parse_usbscsi scripts initially developed by sylver | ||
+ | * The mount_sd.sh script has been modified to properly mount and unmount usb drives | ||
+ | * as noted above, these scripts let you use and share an unlimited number of usb hard drive and flash drives | ||
+ | * also supports automounting of usb cd-roms (not recommended). | ||
+ | * in other words, hot plugging works the way it is supposed to. | ||
+ | * runs avr_evtd | ||
+ | * its serial port is enabled | ||
+ | * write_ng is used early in the boot sequence and write_ok is used at the very end. | ||
+ | * The combination of the last two points allows me to easily work around any boot lockups without having to re-flash |
Latest revision as of 09:21, 7 February 2011
Please post your accomplishments with your Buffalo devices here. New entries should be added to the end.
|
Mindbender
08:46, 6 July 2006 (EDT)
Model: Linkstation 1
- Bootloader: UBoot 2.01 (LNI)
- running 2.4.33.3 + telnet/ftp/root-enabled firmimg.bin in flash
- foonas svn 1062 + 2.6.22 on hdd
- 1 Printer in Front-USB-Port
- 2 USB-HDDs via a USB-Hub in the Back-USB-Port
- soldered header for JTAG + i have a JTAG cable created by tampakuro
What I use it for:
- Kernel-NFS - recording from my dbox2
- Filesharing - with Mldonkey/transmissioncli
- wget4web - an Webinterface for wget
- vsftp-server
- SVN-Server
Model: Linkstation 1
- Bootloader: UBoot 2.01 (LNI)
- Development box for testing
Model: Linkstation Pro
- FreeLink
- serial-access
- Development box for testing
Model: Kurobox HG
- JTAG headers soldered - unbricked via JTAG
Flavoie
11:57, 6 July 2006 (EDT)
Model: Linkstation HG
- Freelink running Debian Testing with Kernel 2.6.16 via loader.o
What I use it for:
- Windows file sharing using Samba (stream movies from Windows XP Media Center PC)
- BitTorrent - with Mldonkey and sancho gui web interface
- Webmin & VNC for easy admin interface
- Lighttpd instead of Apache
- PHP
- MySQL
- Gallery 2 for personal photo album
- Dyndns updater, ddclient
Future plans:
Retire x86 debian server setup with the following software and use Linkstation instead:
- Wiki for hockey team
Ramuk
Ramuk 17:38, 14 August 2008 (BST)
Models:
- Linkstation HG 250
- Freelink powerpc hdhglan 1.11
- Linux LinkStation 2.6.23.14 #52
- Kuro HG 750
- Freelink powerpc hdhglan 1.11
- Linux LinkStation 2.6.20.2-kuroboxHG
- Kuro HG 180
- OpenLink 0.73b
- U-boot bootloader
- Linux (none) 2.6.25.15-svn365-dirty375 #21
- Kuro Pro 320
- Armel Debian for the Kurobox Pro - Manual install
- Kernel 2.6.26
- Kuro Pro 80
- Armel Debian for the Kurobox Pro - Manual install
- Kernel 2.6.25.6
What I use them for:
- Encrypted Filespace with EncFS
- To stream video and photos to My XBMC - Using Xbox Media Center with the LinkStation
- Mtdaapd/Firefly to create a Music Share. for the XBMC
- Display Linkstation status on a USB Palm OS Device as an LCD Display with the PalmOrb emulator.
- Download Podcasts with Bashpodder
- Stream MP3s to an Airport Express using RAOP-play
- Media and Shared storage for my computers over Samba
- Using Thttpd as a in house webserver to serve photos using Album - Photo gallery generator which has theme support
- Change to a 750GB Seagate PATA Drive originally a 250GB Drive
- Alpha 220 LED Sign
misterblues
10:26, 14 July 2006 (EDT)
Model: Linkstation 2
- Openlink
What i use it for:
- SMB/CIFS-Server for my Siemens M740AV DVB-T Receiver
- NFS-Server for dbox2 mplayer (Photo/MP3)
- ggrab(sserver) for dbox2 recordings
- DNS Server
Future plans:
- VoIP Server
- UPNP AV Server for M740AV/PC-System/Pocket-PC
Rich
15:40, 16 July 2006 (GMT)
Model: Linkstation 2
- Openlink
What i use it for:
- Streaming music to Sonos music system.
- Printer server.
- DDClient - dynamic DNS client.
Future plans:
- Webmail client.
- Photo album.
Mouloud
00:49, 12 September 2006 (WEST)
Model: Linkstation 2
- latest freelink for LS2 (060810 firmware)
- 1 Printer (HP laserjet 1010 usb) in Back-USB-Port
What I use it for:
- SMB fileserver - with samba
- Filesharing - with Mldonkey using sancho gui
- Web server - with Apache
- web based configuration - with Webmin
- dyndns.org client - with ddclient
- print server - with CUPS
Future plans:
- FTP server
- ...
AndersUk
19:39, 13 September 2006 (GMT)
Model: Linkstation 2
- latest freelink for LS2
What I use it for:
- SMB fileserver - Media and Shared storage for my computers over Samba
- Filesharing - with Mldonkey using sancho gui
- Web based configuration - with Webmin
- FTP server - with vsftpd
What I think so far:
- Bl00dy impressed.
Future plans:
- Mail Server
- LLMP
Jimlennon
08:18, 21 January 2009 (CET)
Model: Linkstation Live 1000
- latest freelink for LSPro
What I use it for:
- SMB/NFS fileserver
- Filesharing - with Mldonkey using sancho gui
- Web server - with Apache, PHP & MySQL
- Web based configuration - with Webmin
- FTP server - with Proftpd
- MRTG
Harddisk upgraded from 500GB to 1000GB (WD Caviar Green - WD10EADS)
Kuroguy
08:57, 20 November 2006 (EDT)
Model: Linkstation 2
What I've done to it:
- Added Serial port
- Added JTAG Port
- Read, write, and erase the entire flash contents via JTAG
- Fully tested JTAG software on it
Future plans:
- Add USB ports
- Add microcontroller programming interface
- Test upcoming U-Boot port
- Ship it off to the next hacker in line
Davy Gravy
Models - Current: LS-HG stock, LS-HG w/ FreeLink, KuroBox HG ; Previous: LS2
What I've done/basic mods:
- Tried out stock firmware, moved to OpenLink for short while, now using FreeLink/Debian & 2.6 kernel
- Flashed the KuroHG and one LS-HG w/ UBoot
- Flashed that LS-HG w/ 2.4.33.3 kernel/firmimg.bin
- moved away from the Buffalo-Installer to Kuro-style installs w/ roomy hda1 partitions
- hda3 partitions w/ XFS and JFS filesystem formats]], since they give a higher transfer rate - around 12.5MB/sec sustained
I use the modded HG for:
- basic NAS for my family
- Webmin w/ Syncmin module for automatic backups onto an attached/removable USB HD
- Firefly Music Server for our Roku, for mp3s and internet radio
- run hpodder each morning for our favorite podcasts via Roku
- running Mediaripper on for automated MP3 conversion
I picked up a used LS1 on eBay for about $25:
- put U-Boot, foonas, and foonas-em on it
- added Transmission (bittorrent client) and p910nd (printserver)
- use it in tandem w/ a Buffalo Router (running Tomato)
- these two devices replace my Apple AirPort BaseStation Extreme
The KuroHG is used for:
- NAS for my student's projects at work/school
- as a learning tool for Linux, C/C++ and programming in general
Next steps:
- Sell the 2nd HG that is still stock - I don't need it anymore - now that I see what one can do w/ FreeLink, the stock firmware seems crippled, to me...
- OK, Debian is nice, but something more fitting for an NAS device, like foonas, is more interesting.
- Buy a LS-Pro/ARM box and learn more (July 2008 - OK, I did that, and lately I've made a Netconsole UBoot for LSPro boxes, & a Debian/Armel image for LSPro's and KuroPro's)
Bauldrick
Model: Linkstation 1
- Freelink running 2.6.20
- Wireless - not very stable though :-(
What I use it for:
- Not a great deal at the moment, but I have a cunning plan!!
Model: Linkstation 2
- Freelink
- HP Photosmart 7550 in front usb port
- Xi-tel HI-FI link usb soundcard in back usb port
What I use it for:
- Stream music via Firefly to my Roku Soundbridge and iTunes on various PC's
- Stream films, music & photo's via Swisscenter to my Buffalo Linktheater
- Stream films & music via SMS to various Playstation 2's around the house
- Filesharing via Torrentflux
- Printing (IPP) via CUPS
- Play music on Linkstation via mpd (would like a light weight browser app?)
- Listen to my music over internet with gnump3d
- Additional Applaunchpage - for links and to be able to start and stop some apps over the browser
Artion
12:30, 25 March 2007 (CST)
Model: Linkstation HD-HGLAN160
- Firmware: originally v1.42, upgrade to v1.45 (hg-openlink-051b)
What i use it for:
- Web server - Apache + MySQL + PHP
- DNS server - BIND
- Mail server - Postfix, SMTP, POP3, IMAP
- Webmail - SquirrelMail
- Photo gallery, music and file storage
Future plans:
- FTP server
- Webmail - OpenWebMail
Dougal
04 Aug 07
2 x LS2. Both boxes running FreeLink. Being used to serve web and email for my domain. Extra configuration for both boxes:
- relocated bind-mounted /home, /usr and /var directory trees (14% disk usage on hda1)
- webmin
- samba
- rsync backups between the two
Box A running apache2(HTTP/HTTPS) + mysql5 + php5
- General web dev platform
- Domain webmail
- LAN media storage
- backup of Box B Maildirs
Box B running bind9(DNS) + exim4(SMTP) + dovecot(IMAP)
- Domain name and email server
- Backup of Box A www/db and media files
I retired an AMD AthlonXP 1800 running WinXP in favour of these boxes :)
timtim
Currently Using:
- u-boot 1.2.0 with fdt via OpenEmbedded for PowerPC Linkstations
- foonas as main distro and foonas-em in flash
Responsible for:
- Adding Buffalo NAS devices and many other platforms to OpenEmbedded (LSPro, KuroPro, LS1, LS2, HG)
- foonas distribution
- foonas-em distribution - first 2.6 based em-mode utilities in flash for PowerPC and MIPSel based linkstations with next gen filesystem support
- foonas-iscsi distribution
- Managing foonas.org and nas-central.org
All my NAS devices are currently being used for foonas/foonas-em/foonas-iscsi development.
Lessrand
17:14, 24 Jan 2008 (CET)
2 x LS HS (400GB harddisk) . Both boxes running FreeLink.
Model: Linkstation HS No. 1
What i use it for:
- ssh backup server
- twonkyvision mediaserver
Model: Linkstation HS No. 2
What i use it for:
- ssh backup server
- svn server
Sparrowhawk
12:15, 24 February 2008 (CST)
Linkstation Pro V1
Reflashed to Freelink
Expanded files and all reset to ext3 filesystem.
Updated Kernel, Installed Webmin, Samba and Firefly.
Stream my .mp3 files to RhythmBox on my Debian Etch Computer.
All my photos as .jpg are accessed by Samba on my home network.
CavesOfTQLT
21:24, 25 February 2008 (GMT)
Kurobox HG WR: Hardware:
- Seagate Barracuda 200GB HDD
Software:
- Boot-loader: U-Boot 1.2.0
- EM system: foonas-em 0.0.8-r2
- kernel: 2.6.24.2
- OS: Gentoo
Function: To run SlimDevices' SlimServer music-streaming server application 24/7.
Speciality software:
- Squeezecenter 7.0 beta
- Samba - for music file transfer
Future:
- To replace the HDD with something larger as, with all my music being in lossless flac format, I only have about 5% free space.
- Possibly get another Kuro or similar and hack away coz the past month or so has got me hooked again...
JonSenior
7 January 2009
Linkstation Live v2 (1TB):
- Kernel 2.6.28
- USB Sound card
- mpd
- Print server (With connected Samsung ML-1640): Works both as postscript and raw queue, although it takes while as postscript (~2mins to print test page from CUPS!). Avoid Canon CAPT printers (e.g. LBP-2900) as these will not work with raw queue and the drivers are x86 only.
- File server: Mounting of shares using NFS and sshfs possible. NFS is used within the network and sshfs can be used for external connections. Music succesfully "streamed" from Paris to Edinburgh!
Function: To play music in a manner controllable from any of my computers. General file storage. Print server.
Tmorehen
11:19PM 8 January 2009 (EDT)
Model: Linkstation 1
- Openlink 0.52b
- print server
- NTP timeserver
- byRequest media server for TiVo
- no longer in use
Model: Kurobox HG
- Customized version of Openlink 0.73b
* supports unlimited number of USB hard drives (I've mounted and shared 5) * all flash drives supported (at least all I've tested) * able to use web interface to hide /mnt folders from Samba and Appletalk
- 500GB hard drive
- Filesharing (music files, pictures, all downloads from internet
- NTP time server for 6 networked computers
- IMAP e-mail server, which allows us to access our e-mail from all local computers
* Fetchmail collects e-mail from 9 different accounts * Spambayes is used to filter out spam (very effective) * Dovecot is the IMAP server
- FTP, Telnet and sshd running
Model: Kurobox HG
- Customized Openlink 0.73b as above
- 350 GB hard drive
- development system
* has all the development tools to compile and install above software
- runs standard Kurobox kernel and kernel 2.6
- runs Samba 2 and Samba 3
- recent work was to complete the mkcode, mkshinfo, parse_usbscsi scripts initially developed by sylver
- The mount_sd.sh script has been modified to properly mount and unmount usb drives
* as noted above, these scripts let you use and share an unlimited number of usb hard drive and flash drives * also supports automounting of usb cd-roms (not recommended). * in other words, hot plugging works the way it is supposed to.
- runs avr_evtd
- its serial port is enabled
- write_ng is used early in the boot sequence and write_ok is used at the very end.
- The combination of the last two points allows me to easily work around any boot lockups without having to re-flash