TS-WX1.0TL/R1

From NAS-Central Buffalo - The Linkstation Wiki
Revision as of 23:37, 13 January 2010 by Brighton36 (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

BUFFALO TS-WX1.0TL/R1 1TB TeraStation Duo

As seen for sale on newegg. [1]

cpuinfo

  Processor: ARM926EJ-S rev 0 (v5l)
  BogoMIPS: 956.82
  Features: swp half thumb fastmult vfp edsp 
  CPU implementer: 0x41
  CPU architecture: 5TE
  CPU variant: 0x1
  CPU part: 0x926
  CPU revision: 0
  Cache type: write-back
  Cache clean: cp15 c7 ops
  Cache lockdown: format C
  Cache format: Harvard
  I size: 32768
  I assoc: 4
  I line length: 32
  I sets: 256
  D size: 32768
  D assoc: 4
  D line length: 32
  D sets: 256
  
  Hardware: Feroceon-MV78XX0
  Revision: 0000
  Serial: 0000000000000000


dmesg output

  Linux version 2.6.22.18 (root@build2.dd-hot24.nas.buffalo.local) (gcc version 4.2.0 20070413 (prerelease)) #749 Wed Sep 30 21:38:05 JST 2009
  CPU: ARM926EJ-S [41159260] revision 0 (ARMv5TE), cr=00053977
  Machine: Feroceon-MV78XX0
  Using UBoot passing parameters structure
  u.mv_uboot.env_addr is 0xfff80000. Using tag's value.
  Memory policy: ECC disabled, Data cache writeback
  On node 0 totalpages: 131072
    DMA zone: 1024 pages used for memmap
    DMA zone: 0 pages reserved
    DMA zone: 130048 pages, LIFO batch:31
    Normal zone: 0 pages used for memmap
  CPU0: D VIVT write-back cache
  CPU0: I cache: 32768 bytes, associativity 4, 32 byte lines, 256 sets
  CPU0: D cache: 32768 bytes, associativity 4, 32 byte lines, 256 sets
  Built 1 zonelists.  Total pages: 130048
  Kernel command line: console=ttyS0,115200 root=/dev/sda2 rw initrd=0x00900040,15M panic=5 BOOTVER=2.06
  PID hash table entries: 2048 (order: 11, 8192 bytes)
  Console: colour dummy device 80x30
  Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
  Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
  Memory: 512MB 0MB 0MB 0MB = 512MB total
  Memory: 499584KB available (4192K code, 321K data, 128K init)
  Calibrating delay loop... 956.82 BogoMIPS (lpj=4784128)
  Mount-cache hash table entries: 512
  CPU: Testing write buffer coherency: ok
  NET: Registered protocol family 16
  
  CPU 0, CPU Interface
  -------------
  SDRAM_CS0.... ....base 00000000, size 512MB 
  SDRAM_CS1.... ....disable
  SDRAM_CS2.... ....disable
  SDRAM_CS3.... ....disable
  DEVICE_CS0... ....base f8000000, size  32MB 
  DEVICE_CS1... ....base fe000000, size   1MB 
  DEVICE_CS2... ....base fc000000, size   1MB 
  DEVICE_CS3... ....no such
  DEV_BOOCS.... ....base fff00000, size 512KB 
  DEVICE_SPI... ....base fff00000, size 512KB 
  PEX0_IO...... ....base f2000000, size   8MB 
  PEX0_MEM0.... ....base c8000000, size  64MB 
  PEX1_IO...... ....base f3000000, size   8MB 
  PEX1_MEM0.... ....base cc000000, size  64MB 
  PEX2_IO...... ....no such
  PEX2_MEM0.... ....no such
  PEX3_IO...... ....base f5000000, size   8MB 
  PEX3_MEM0.... ....base d4000000, size  64MB 
  PEX4_IO...... ....base f6000000, size   8MB 
  PEX4_MEM0.... ....base d8000000, size  64MB 
  PEX5_IO...... ....no such
  PEX5_MEM0.... ....no such
  PEX6_IO...... ....no such
  PEX6_MEM0.... ....no such
  PEX7_IO...... ....no such
  PEX7_MEM0.... ....no such
  CRYPT_ENG..... ....base f7000000, size   2MB 
  INTER_REGS... ....base f1000000, size   1MB 
  
    Marvell Development Board (LSP Version 2.0.2_MV78XX0)-- DB-MV78100-A-BP-BUFFALO  Soc: MV78100 A0 LE
  
   Detected Tclk 166666667 and SysClk 400000000 
  Marvell USB EHCI Host controller #0: 808fd600
  Marvell USB EHCI Host controller #1: 808fd400
  Marvell USB EHCI Host controller #2: 808fd200
  PEX0 interface detected no Link.
  PEX4 interface detected no Link.
  SCSI subsystem initialized
  NET: Registered protocol family 2
  Time: orion_clocksource clocksource has been installed.
  IP route cache hash table entries: 16384 (order: 4, 65536 bytes)
  TCP established hash table entries: 65536 (order: 7, 524288 bytes)
  TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
  TCP: Hash tables configured (established 65536 bind 65536)
  TCP reno registered
  checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
  Freeing initrd memory: 15360K
  RTC registered.
  MICON ctrl (C) BUFFALO INC. V.1.00 installed.
  Buffalo Gpio Control Driver (C) BUFFALO INC. Ver.0.02 installed.
  >BuffaloCpuInterrupts_init
  Buffalo CPU Inerupts Driver (C) BUFFALO INC. Ver.0.01 alpha1 installed.
  MICON V2 (C) BUFFALO INC. V.1.00 installed.
  UPSDRV (C) BUFFALO INC. V.1.00 installed.
    OMRON contact type ups shutdown support enabled!
  Kernel event proc (C) BUFFALO INC. V.1.00 installed.
  Buffalo RTC Driver (C) BUFFALO INC. Ver.1.00 (RS5C372) installed.
  Buffalo GPIO SATA Hotplug Event Driver (C) BUFFALO INC. Ver.1.00 installed.
  Use the XOR engines (acceleration) for enhancing the following functions:
    o RAID 5 Xor calculation
    o kernel memcpy
    o kenrel memzero
  Number of XOR engines to use: 2
  cesadev_init(8001237c)
  mvCesaInit: sessions=640, queue=64, pSram=f7000000
  VFS: Disk quotas dquot_6.5.1
  Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  JFFS2 version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
  SGI XFS with ACLs, large block numbers, no debug enabled
  SGI XFS Quota Management subsystem
  io scheduler noop registered (default)
  io scheduler anticipatory registered
  io scheduler deadline registered
  io scheduler cfq registered
  Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
  serial8250.0: ttyS0 at MMIO 0xf1012000 (irq = 12) is a 16550A
  serial8250.0: ttyS1 at MMIO 0xf1012100 (irq = 13) is a 16550A
  serial8250.2: ttyS2 at MMIO 0xf1012200 (irq = 14) is a 16550A
  RAMDISK driver initialized: 3 RAM disks of 32768K size 1024 blocksize
  loop: module loaded
  Load Marvell Ethernet Driver
    o Cached descriptors in DRAM
    
    o Single RX Queue support - ETH_DEF_RXQ=0
    o Single TX Queue support - ETH_DEF_TXQ=0
    o TCP segmentation offload enabled
    o Receive checksum offload enabled
    o Transmit checksum offload enabled
    o Network Fast Processing (Routing) supported
    o Proc tool API enabled
    o Rx descripors: q0=128
    o Tx descripors: q0=532
    o Loading network interface: 
  eth0 eth1 
  Network Fast Processing Disabled
  mvFpRuleDb (809e0000): 16384 entries, 65536 bytes
  Integrated Sata device found
  mvSataInitAdapter : regVal changed(0x00000010)
  scsi0 : Marvell SCSI to SATA adapter
  scsi1 : Marvell SCSI to SATA adapter
  ** BUFFALO Disable Command Queuing Function [0 0] **
  ** BUFFALO Disable Command Queuing Function [0 1] **
  scsi 0:0:0:0: Direct-Access     SAMSUNG  HD502HI          1AG0 PQ: 0 ANSI: 5
  Linux IAL (ERROR) [0 0 0]: set device max sectors to 2048 
  scsi 1:0:0:0: Direct-Access     SAMSUNG  HD502HI          1AG0 PQ: 0 ANSI: 5
  Linux IAL (ERROR) [0 1 0]: set device max sectors to 2048 
  Linux IAL (ERROR) : retry command host=0, bus=0 SCpnt = 9f10bba0
  sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)
  sd 0:0:0:0: [sda] Write Protect is off
  sd 0:0:0:0: [sda] Mode Sense: 23 00 00 00
  sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)
  sd 0:0:0:0: [sda] Write Protect is off
  sd 0:0:0:0: [sda] Mode Sense: 23 00 00 00
  sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
   sda: sda1 sda2 sda3 sda4 sda5 sda6
  sd 0:0:0:0: [sda] Attached SCSI disk
  Linux IAL (ERROR) : retry command host=1, bus=1 SCpnt = 9f10bba0
  sd 1:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB)
  sd 1:0:0:0: [sdb] Write Protect is off
  sd 1:0:0:0: [sdb] Mode Sense: 23 00 00 00
  sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  sd 1:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB)
  sd 1:0:0:0: [sdb] Write Protect is off
  sd 1:0:0:0: [sdb] Mode Sense: 23 00 00 00
  sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
   sdb: sdb1 sdb2 sdb3 sdb4 sdb5 sdb6
  sd 1:0:0:0: [sdb] Attached SCSI disk
  sd 0:0:0:0: Attached scsi generic sg0 type 0
  sd 1:0:0:0: Attached scsi generic sg1 type 0
  SPI Serial flash detected @ 0xfff00000, 512KB (8sec x 64KB)
  cmdlinepart partition parsing not available
      Write size     : 0x00000800
      OOB size       : 0x00000040
      Erase size     : 0x00020000
  NAND device: Manufacturer ID: 0x20, Chip ID: 0xdc (ST Micro NAND 512MiB 3,3V 8-bit)
  Scanning device for bad blocks
  Bad eraseblock 1195 at 0x09560000
  Bad eraseblock 1864 at 0x0e900000
  Bad eraseblock 2989 at 0x175a0000
  cmdlinepart partition parsing not available
  Using static partition definition
  Creating 2 MTD partitions on "nand_mtd":
  0x00000000-0x02000000 : "nboot"
  0x02000000-0x20000000 : "nroot"
  mice: PS/2 mouse device common for all
  md: raid0 personality registered for level 0
  md: raid1 personality registered for level 1
  raid6: int32x1    116 MB/s
  raid6: int32x2    128 MB/s
  raid6: int32x4    130 MB/s
  raid6: int32x8     98 MB/s
  raid6: using algorithm int32x4 (130 MB/s)
  md: raid6 personality registered for level 6
  md: raid5 personality registered for level 5
  md: raid4 personality registered for level 4
  raid5: measuring checksumming speed
     arm4regs  :   824.000 MB/sec
     8regs     :   742.000 MB/sec
     32regs    :   822.400 MB/sec
  raid5: using function: arm4regs (824.000 MB/sec)
  device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
  dm_crypt using the OCF package.
  ip_tables: (C) 2000-2006 Netfilter Core Team
  TCP cubic registered
  NET: Registered protocol family 1
  NET: Registered protocol family 17
  VFP support v0.3: implementor 41 architecture 1 part 10 variant 9 rev 0
  md: Autodetecting RAID arrays.
  md: autorun ...
  md: ... autorun DONE.
  RAMDISK: Compressed image found at block 0
  VFS: Mounted root (ext2 filesystem).
  kjournald starting.  Commit interval 5 seconds
  EXT3-fs: mounted filesystem with ordered data mode.
  kjournald starting.  Commit interval 5 seconds
  EXT3-fs: mounted filesystem with ordered data mode.
  md: md10 stopped.
  md: bind<sdb5>
  md: bind<sda5>
  raid1: raid set md10 active with 2 out of 2 mirrors
  md: md1 stopped.
  md: bind<sdb2>
  md: bind<sda2>
  raid1: raid set md1 active with 2 out of 2 mirrors
  md: md0 stopped.
  md: bind<sdb1>
  md: bind<sda1>
  raid1: raid set md0 active with 2 out of 2 mirrors
  kjournald starting.  Commit interval 5 seconds
  EXT3 FS on md0, internal journal
  EXT3-fs: mounted filesystem with ordered data mode.
  kjournald starting.  Commit interval 5 seconds
  EXT3 FS on md1, internal journal
  EXT3-fs: mounted filesystem with ordered data mode.
  kjournald starting.  Commit interval 5 seconds
  EXT3 FS on md1, internal journal
  EXT3-fs: mounted filesystem with ordered data mode.
  VFS: Mounted root (ext3 filesystem).
  Trying to move old root to /initrd ... okay
  Freeing init memory: 128K
  Adding 999864k swap on /dev/md10.  Priority:-1 extents:1 across:999864k
  kjournald starting.  Commit interval 5 seconds
  EXT3 FS on md0, internal journal
  EXT3-fs: mounted filesystem with ordered data mode.
  usbcore: registered new interface driver usbfs
  usbcore: registered new interface driver hub
  usbcore: registered new device driver usb
  ehci_marvell ehci_marvell.70059: Marvell Orion EHCI
  ehci_marvell ehci_marvell.70059: new USB bus registered, assigned bus number 1
  ehci_marvell ehci_marvell
  ehci_marvell ehci_marvell.70059: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
  usb usb1: configuration #1 chosen from 1 choice
  hub 1-0:1.0: USB hub found
  hub 1-0:1.0: 1 port detected
  ehci_marvell ehci_marvell.168472: Marvell Orion EHCI
  ehci_marvell ehci_marvell.168472: new USB bus registered, assigned bus number 2
  ehci_marvell ehci_marvell.168472: irq 17, io base 0xf1051100
  ehci_marvell ehci_marvell.168472: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
  usb usb2: configuration #1 chosen from 1 choice
  hub 2-0:1.0: USB hub found
  hub 2-0:1.0: 1 port detected
  ehci_marvell ehci_marvell.336244: Marvell Orion EHCI
  ehci_marvell ehci_marvell.336244: new USB bus registered, assigned bus number 3
  ehci_marvell ehci_marvell.336244: irq 18, io base 0xf1052100
  ehci_marvell ehci_marvell.336244: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
  usb usb3: configuration #1 chosen from 1 choice
  hub 3-0:1.0: USB hub found
  hub 3-0:1.0: 1 port detected
  ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
  USB Universal Host Controller Interface driver v3.0
  Initializing USB Mass Storage driver...
  usbcore: registered new interface driver usb-storage
  USB Mass Storage support registered.
  usbcore: registered new interface driver usblp
  drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
  eth1: started
  eth0: link down
  eth0: started
  eth0: link up, full duplex, speed 100 Mbps
  eth0: TxEnable WA - Enabled, deep=1