TS-XETL
From NAS-Central Buffalo - The Linkstation Wiki
(Created page with "TeraStation™ ES TS-XEL = TeraStation ES (TS-XEL) = ==Variants== * 4.0TB TS-XE4.0TL/R5 * 8.0TB TS-XE8.0TL/R5 * 12.0TB TS-XE12.0TL/R5 ==…") |
|||
| Line 1: | Line 1: | ||
| - | [[File: | + | [[File:TS-XE large.jpg|right|TeraStation™ ES TS-XEL]] |
= TeraStation ES (TS-XEL) = | = TeraStation ES (TS-XEL) = | ||
==Variants== | ==Variants== | ||
Revision as of 21:31, 7 May 2012
Contents |
TeraStation ES (TS-XEL)
Variants
- 4.0TB TS-XE4.0TL/R5
- 8.0TB TS-XE8.0TL/R5
- 12.0TB TS-XE12.0TL/R5
Commercial description
TS-XEL : TeraStation™ ES @ BUFFALO
The LinkStation™ Duo is a high performance, multimedia, shared RAID network storage solution for the home and small office that requires a central location to share data files, photos, video and music.
The unit is a two drive NAS solution that can be configured in RAID 0 for performance or RAID 1 for redundant storage. In addition to the storage capabilities, stream multimedia to a PC, a Mac, a Buffalo™ LinkTheater™ and other DLNA CERTIFIED™ or UPNP media player, as well as sharing movies, photos and documents in a home or small business network via the Internet with the WebAccess feature. The LinkStation™ Duo seamlessly integrates with iTunes® and allows access to music files from your iTunes® software.
With features such as enhanced performance of up to 40MB/s, quick swap via the front panel with two removable drives and easy set-up via a simple web interface, the LinkStation™ Duo is the perfect solution to store, save & share your digital life from one central place.
Gain SSH Access
Source / Credit : [1]
See notes below for Firmware 1.41.
Firmware 1.58
Use the following password:
IeY8omJwGlGkIbJm2FH_MV4fLsXE8ieu0gNYwE6Ty
Firmware 1.57
Use the following password:
1NIf_2yUOlRDpYZUVNqboRpMBoZwT4PzoUvOPUp6l
Firmware 1.56
Use the following password:
aAhvlM1Yp7_2VSm6BhgkmTOrCN1JyE0C5Q6cB3oBB
Firmware 1.54
Use the following password:
1NIf_2yUOlRDpYZUVNqboRpMBoZwT4PzoUvOPUp6l
Firmware 1.52
Use the following password:
IeY8omJwGlGkIbJm2FH_MV4fLsXE8ieu0gNYwE6Ty
Firmware 1.42
Use the following password:
IeY8omJwGlGkIbJm2FH_MV4fLsXE8ieu0gNYwE6Ty
Firmware 1.41 and later
In this version, it appears that acp_commander no longer provides the capability to execute commands, which prevents most earlier strategies from working. However, it is quite straightforward to solve this problem by using a custom firmware image. The basic principle is described in Create a custom firmware image.
Start with the files downloaded from Buffalo's website. Then, ideally on a Linux platform of some sort...
1) unzip the hddrootfs.img
unzip hddrootfs.img
provide the right password for the firmware.
For version 1.41, the third zip password listed in the above mentioned reference proved successful:
YvSInIQopeipx66t_DCdfEvfP47qeVPhNhAuSYmA4
The result of this is a hddrootfs.buffalo.updated...this is the tared root-filesystem of the firmware image.
2) create a folder where you want to untar the rootfs and untar it
mkdir <foldername> cd <foldername> tar -vxz --numeric-owner -p -f ../hddrootfs.buffalo.updated
3) modify the image to enable sshd logins. This copies an authorized_keys file from your home directory on the Linux box, but any mechanism to make an authorized_keys file will work
cd etc sed -i 's/PermitRootLogin/# PermitRootLogin/' sshd_config cd ../root mkdir .ssh cp $HOME/.ssh/authorized_keys .ssh/authorized_keys
4) create the hddrootfs.buffalo.updated again (you should be in the folder where you extracted the image)
tar -vczf ../hddrootfs.buffalo.updated-new * cd .. mv hddrootfs.buffalo.updated hddrootfs.buffalo.updated-old mv hddrootfs.buffalo.updated-new hddrootfs.buffalo.updated
5) create the hddrootfs.img again
CAUTION: if you use the wrong password, the firmware updater / the linkstation will fail to unzip the hddrootfs.img
zip -e hddrootfs.img hddrootfs.buffalo.updated
6) Perform the update using the normal Buffalo updater (probably after enabling the debug option to reload the image)
7) Use ssh to root@ip_address
Firmware Information
Firmware v1.37 is available at [2] or direct link [3]
PLACEHOLDER Generated with v1.24 of 5th February 2010 from 2TB LS-WX2.0TL/R1
uname -a placeholder
Linux LS-WXLE0F 2.6.22.18-88f6281 #50 Tue Dec 22 18:06:23 JST 2009 armv5tejl unknown
cpuinfo placeholder
Processor : ARM926EJ-S rev 1 (v5l) BogoMIPS : 599.65 Features : swp half thumb fastmult edsp CPU implementer : 0x56 CPU architecture: 5TE CPU variant : 0x2 CPU part : 0x131 CPU revision : 1 Cache type : write-back Cache clean : cp15 c7 ops Cache lockdown : format C Cache format : Harvard I size : 16384 I assoc : 4 I line length : 32 I sets : 128 D size : 16384 D assoc : 4 D line length : 32 D sets : 128 Hardware : Feroceon-KW Revision : 0000 Serial : 0000000000000000
meminfo placeholder
MemTotal: 125832 kB MemFree: 13080 kB Buffers: 136 kB Cached: 57636 kB SwapCached: 0 kB Active: 46468 kB Inactive: 39416 kB SwapTotal: 999864 kB SwapFree: 999864 kB Dirty: 4 kB Writeback: 0 kB AnonPages: 27544 kB Mapped: 13328 kB Slab: 20536 kB SReclaimable: 3100 kB SUnreclaim: 17436 kB PageTables: 1060 kB NFS_Unstable: 0 kB Bounce: 0 kB CommitLimit: 1062780 kB Committed_AS: 313276 kB VmallocTotal: 516096 kB VmallocUsed: 17476 kB VmallocChunk: 491516 kB
dmesg placeholder
Linux version 2.6.22.18-88f6281 (root@build2.dd-hot24.nas.buffalo.local) (gcc version 4.2.0 20070413 (prerelease)) #50 Tue Dec 22 18:06:23 JST 2009 CPU: ARM926EJ-S [56251311] revision 1 (ARMv5TE), cr=00053977 Machine: Feroceon-KW Using UBoot passing parameters structure Memory policy: ECC disabled, Data cache writeback On node 0 totalpages: 32768 DMA zone: 256 pages used for memmap DMA zone: 0 pages reserved DMA zone: 32512 pages, LIFO batch:7 Normal zone: 0 pages used for memmap ~ placeholder snip ~
References
| This article is currently a stub. You can help this Wiki by expanding it . This template will categorize articles that include it into Category:Stubs. |
