http://buffalo.nas-central.org/w/index.php?title=Talk:Kurobox_Pro_u-boot_environment_variable_settings&action=history Revision history for this page on the wiki en MediaWiki 1.15.1 Fri, 24 May 2013 04:04:48 GMT http://buffalo.nas-central.org/w/index.php?title=Talk:Kurobox_Pro_u-boot_environment_variable_settings&diff=20216&oldid=prev <p>New page: This is the same as on http://buffalo.nas-central.org/index.php/KuroBoxPro The printenv outputs are not the real ones used. The bootcmd is tftp (identical to def_tftp). This is set when y...</p> <p><b>New page</b></p><div>This is the same as on http://buffalo.nas-central.org/index.php/KuroBoxPro<br /> <br /> The printenv outputs are not the real ones used. The bootcmd is tftp (identical to def_tftp). This is set when you interrupt the boot process at the first prompt (aka press any key to tftp). After 3 seconds or so there is another prompt to interrupt the regular boot process, this time however without tftp, i.e. the bootcmd is not altered. It is important to remember that interrupting the boot process at the first prompt sets it to tftp, in particular if you do some changes and save them to the flash memory with saveenv. You'll end up with a box locked to tftp.</div> Thu, 24 Apr 2008 14:39:49 GMT Gv http://buffalo.nas-central.org/wiki/Talk:Kurobox_Pro_u-boot_environment_variable_settings