Difference between revisions of "Talk:Recover a non working "bricked" Linkstation"

From NAS-Central Buffalo - The Linkstation Wiki
Jump to: navigation, search
 
 
Line 5: Line 5:
 
* start update again.  
 
* start update again.  
  
Possibly add... If, at this time, you get an error "<code>password is invalid.</code>"<br>
+
Possibly add... If, at this time, you get an error <pre>password is invalid.</pre>
You must power cycle the linkstation and then flash it.  This flash should come back successful.
+
You must power cycle the linkstation and then flash it.  This flash should come back successful. ~ [[User:Goat|Goat]] 20:55, 31 October 2006 (EST)

Latest revision as of 01:55, 1 November 2006

Anyone else get this result? (This was my experience)
After:

  • if so, wait until Diskfull LED goes off after some minutes.
  • press "search" again.
  • start update again.
Possibly add... If, at this time, you get an error
password is invalid.

You must power cycle the linkstation and then flash it. This flash should come back successful. ~ Goat 20:55, 31 October 2006 (EST)