Talk:Recover a non working "bricked" Linkstation

From NAS-Central Buffalo - The Linkstation Wiki
Revision as of 01:48, 1 November 2006 by (Talk)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Anyone else get this result? (This was my experience)

  • if so, wait until Diskfull LED goes off after some minutes.
  • press "search" again.
  • start update again.

Possibly add... If, at this time, you get an error "password is invalid."
You must power cycle the linkstation and then flash it. This flash should come back successful.