Talk:UBoot-Installer - Revision history

Ramuk: /* /etc/init.d/uboot_installer */

Ramuk — Wed, 15 Nov 2006 02:45:08 GMT

/etc/init.d/uboot_installer

← Older revision		Revision as of 02:45, 15 November 2006
Line 17:		Line 17:
	<pre>		<pre>
	# !/bin/sh		# !/bin/sh
-		+	#
	# mount the hdd-partitions		# mount the hdd-partitions
		+
	/usr/sbin/mount_disk		/usr/sbin/mount_disk
		+

	# check if hdd really was successfully mounted		# check if hdd really was successfully mounted
	# if yes proceed, if no stop		# if yes proceed, if no stop
-	mount \| grep /mnt/hda1 > /dev/null \|\| ~~exit~~ 1	+
-	mount \| grep /mnt/hda3 > /dev/null \|\| exit 1	+	ERROR="0"
		+	mount \| grep /mnt/hda1 > /dev/null \|\| ERROR="1"
		+	mount \| grep /mnt/hda3 > /dev/null \|\| ERROR="1"
		+	if [ "$ERROR" == "1" ] ; then
		+	echo "FATAL: HDD not mounted!"
		+	exit 1
		+	fi
		+
		+

	# check which box this script is running on		# check which box this script is running on
		+
	ls /dev/fl* > /dev/null && FLAVOR="ls1"		ls /dev/fl* > /dev/null && FLAVOR="ls1"
	ls /dev/mtdblock* > /dev/null && FLAVOR="hg"		ls /dev/mtdblock* > /dev/null && FLAVOR="hg"

		+
	# check if a valid all-flash-file is available at the correct position on the hdd.		# check if a valid all-flash-file is available at the correct position on the hdd.
	# it should check for /mnt/hda1/full_flash_image.bin...this file will be inside the		# it should check for /mnt/hda1/full_flash_image.bin...this file will be inside the
	# bundled image.dat...at /		# bundled image.dat...at /
-	ls /mnt/hda1/dev/full_flash_image.bin \|\| exit 1	+
-		+	if ! ls /mnt/hda1/dev/full_flash_image.bin ; then
		+	echo "FATAL: The all-flash-file is not valid! "
		+	exit 1
		+	fi
		+
		+
	# flash the all-flash-file to the complete flash-device		# flash the all-flash-file to the complete flash-device
	>>TO BE DONE		>>TO BE DONE
Line 43:		Line 60:

	# automatically reboot		# automatically reboot
		+
	reboot		reboot
	</pre>		</pre>

Ramuk: /* /etc/init.d/uboot_installer */

Ramuk — Wed, 15 Nov 2006 02:37:12 GMT

/etc/init.d/uboot_installer

← Older revision		Revision as of 02:37, 15 November 2006
Line 28:		Line 28:
	# check which box this script is running on		# check which box this script is running on
	ls /dev/fl* > /dev/null && FLAVOR="ls1"		ls /dev/fl* > /dev/null && FLAVOR="ls1"
-	ls /dev/mtdblock* > /dev/null FLAVOR="hg"	+	ls /dev/mtdblock* > /dev/null && FLAVOR="hg"

	# check if a valid all-flash-file is available at the correct position on the hdd.		# check if a valid all-flash-file is available at the correct position on the hdd.

Ramuk: /* /etc/init.d/uboot_installer */

Ramuk — Wed, 15 Nov 2006 02:33:09 GMT

/etc/init.d/uboot_installer

← Older revision		Revision as of 02:33, 15 November 2006
Line 23:		Line 23:
	# check if hdd really was successfully mounted		# check if hdd really was successfully mounted
	# if yes proceed, if no stop		# if yes proceed, if no stop
-
	mount \| grep /mnt/hda1 > /dev/null \|\| exit 1		mount \| grep /mnt/hda1 > /dev/null \|\| exit 1
	mount \| grep /mnt/hda3 > /dev/null \|\| exit 1		mount \| grep /mnt/hda3 > /dev/null \|\| exit 1

	# check which box this script is running on		# check which box this script is running on
-	>> ~~possibly unnecessary - the firmware updater itself takes care about that~~	+	ls /dev/fl* > /dev/null && FLAVOR="ls1"
		+	ls /dev/mtdblock* > /dev/null FLAVOR="hg"

	# check if a valid all-flash-file is available at the correct position on the hdd.		# check if a valid all-flash-file is available at the correct position on the hdd.
	# it should check for /mnt/hda1/full_flash_image.bin...this file will be inside the		# it should check for /mnt/hda1/full_flash_image.bin...this file will be inside the
	# bundled image.dat...at /		# bundled image.dat...at /
-	~~>> TO BE DONE~~	+	ls /mnt/hda1/dev/full_flash_image.bin \|\| exit 1

	# flash the all-flash-file to the complete flash-device		# flash the all-flash-file to the complete flash-device
-	>> TO BE DONE	+	>>TO BE DONE

	# maybe do some post-flashing checks before rebooting automatically and do not reboot if		# maybe do some post-flashing checks before rebooting automatically and do not reboot if
	# anything goes wrong so debugging + fixing it via telnet is possible		# anything goes wrong so debugging + fixing it via telnet is possible
-	>> TO BE DONE	+	>> TO BE DONE

	# automatically reboot		# automatically reboot
	reboot		reboot
	</pre>		</pre>

85.124.221.56: /* /etc/init.d/uboot_installer */

85.124.221.56 — Tue, 14 Nov 2006 22:01:04 GMT

/etc/init.d/uboot_installer

← Older revision		Revision as of 22:01, 14 November 2006
Line 28:		Line 28:

	# check which box this script is running on		# check which box this script is running on
-	>> ~~just 4 safety~~ - the firmware updater itself takes care about that	+	>> possibly unnecessary - the firmware updater itself takes care about that

-	# check if a valid all-flash-file is available at the correct position on the hdd.	+	# check if a valid all-flash-file is available at the correct position on the hdd.
		+	# it should check for /mnt/hda1/full_flash_image.bin...this file will be inside the
		+	# bundled image.dat...at /
	>> TO BE DONE		>> TO BE DONE

Ramuk: /* /etc/init.d/uboot_installer */

Ramuk — Tue, 14 Nov 2006 21:34:23 GMT

/etc/init.d/uboot_installer

← Older revision		Revision as of 21:34, 14 November 2006
Line 23:		Line 23:
	# check if hdd really was successfully mounted		# check if hdd really was successfully mounted
	# if yes proceed, if no stop		# if yes proceed, if no stop
-	>> ~~TO BE DONE~~	+
-		+	mount \| grep /mnt/hda1 > /dev/null \|\| exit 1
		+	mount \| grep /mnt/hda3 > /dev/null \|\| exit 1
		+
	# check which box this script is running on		# check which box this script is running on
	>> just 4 safety - the firmware updater itself takes care about that		>> just 4 safety - the firmware updater itself takes care about that

85.124.221.56: added initial scripts for the UBoot installer...mostly pseudocode (mindbender)

85.124.221.56 — Tue, 14 Nov 2006 20:38:19 GMT

added initial scripts for the UBoot installer...mostly pseudocode (mindbender)

New page

==/usr/sbin/mount_disk==
<pre>
#! /bin/sh

echo -n "Mounting system (/dev/hda1) + data partition (/dev/hda3)"
echo -n "of the internal HDD to /mnt/"

mkdir /mnt/hda1
mkdir /mnt/hda3

mount -t vfat,ext3,ext2 /dev/hda1 /mnt/hda1
mount -t vfat,ext3,ext2 /dev/hda3 /mnt/hda3

exit 0
</pre>
==/etc/init.d/uboot_installer==
<pre>
# !/bin/sh

# mount the hdd-partitions
/usr/sbin/mount_disk

# check if hdd really was successfully mounted
# if yes proceed, if no stop
>> TO BE DONE

# check which box this script is running on
>> just 4 safety - the firmware updater itself takes care about that

# check if a valid all-flash-file is available at the correct position on the hdd.
>> TO BE DONE

# flash the all-flash-file to the complete flash-device
>> TO BE DONE

# maybe do some post-flashing checks before rebooting automatically and do not reboot if
# anything goes wrong so debugging + fixing it via telnet is possible
>> TO BE DONE

# automatically reboot
reboot
</pre>