Difference between revisions of "Talk:Vblade - ATA over Ethernet"
m (→My Setup)
|Line 33:||Line 33:|
I bricked my LS when trying to mount an internal partition the first time I tried this, so I used a usb drive this time around. Which on my LinkStation was <tt>/dev/sda1</tt> - [[User:Ramuk|Ramuk]]
In this case I have a [[w:Pentium III|PIII]]/600 [[w:Compaq_Armada|Compaq Armada]] laptop running [[w:Ubuntu (Linux distribution)|Ubuntu]] Dapper Drake. - [[User:Ramuk|Ramuk]]
Revision as of 23:34, 28 August 2006
This isn't really a fair comparision for cost at all, after all Coraid's devices are SATA and Gigabit Ethernet optimized. But still it's a fun comparision to see what opensource hardware and software can get you.
15 blades no included hard drives
15 blades x 750GB = max 11.25TB
- SATA Storage - SR1520
- Total: $3996
Kurobox + Netgear Switch
- 15 Kuro Box HG WR vblades
- 15 x $149 each = $2235
- NETGEAR GS116 16-port Gigabit Switch 10/100/1000 Mbps
Open Source Saves you $1594
As I said certainly not a fair comparison, the Coraid hardware is different (SATA vs PATA) and optimized from a ethernet switching standpoint vs the Kurobox/Linkstation.
But still a savings of $1600 is nothing to sneeze at!
- Ramuk 23:57, 27 August 2006 (EDT)
At 1000Mb/s / 8bits/Byte / 15 kuroboxes = 8.33 MB/Sec needed in transfer rate per kurobox RAIDed together to completely soak a 1Gb/s ethernet connection. Seems like it could be doable expecially with XFS....hmmmmmmmm
- Ramuk 02:17, 28 August 2006 (EDT)