TeraStation: Resetting to English
Sometimes when you reflash a teraStation for some reason (as yet undetermined) it seems to lose its language settings and come back up in Japanese. This article shows how to reset it back to English.
There are basically two methods available:
- Editing a configuration file at the Linux level
- Using the Buffalo supplied Web interface
Editing a Configuration File
This is the simplest method, but does require you to have flashed your TeraStation with a version of firmware that allows telnet access, and it does involve some command line work and the ability to use a linux/unix editor.
The steps involved are:
- Telnet to the TeraStation and log in as a user with root access
- Edit the file /etc/melco/info and see if it has a line of the form
if so change it so it reads
If the 'lang' line does not exist then add it.
When you have done this the Buffalo Web interface should start operating in English again.
Using the Web Interface
This is a little more convoluted as it requires you navigating a Japanese web page to change a setting;
- Connect to the Buffalo station via a browser. You will initially see a page that looks something like the following:
This is the Japanese equivalent of the Home screen.
- Select the second option from the menu on the left. This will result in a page like this
- Scroll down to the 4th section of the page. This will have 2 drop downs. The first is used to set the language and the second one the code page. Change the language drop-down to the english one (i.e. not the value initially displayed).
if you want you can also change the code-page down or you can wait until you ahve got English page back.
- Now go right to the bottom of the page and you will see a button. This is the "Apply" button so click on it. This will leave you on this page with everything still displayed in Japanese.
- Click on another section on the Left-hand menu and the new page should now be in English. clicking back on the basic page will now display that in English as well.