Terastation Harddisk Layout (PPC)

From NAS-Central Buffalo - The Linkstation Wiki
Revision as of 18:04, 29 March 2006 by Bg (Talk | contribs) (Reverted edit of Bismarck, changed back to last version by Bg)

Jump to: navigation, search

(Information on this page currently for the 1 TB version.)

The TeraStation has four Western Digital 250 GB harddisks (WDC WD2500BB-22GUC0) on four IDE buses of a IT8212 type controller. (Reportedly there are also versions with slightly smaller Maxtor disks.) Each disk is partitioned approximately like this:

  • partition 1, 400 MB, RAID auto-detect
  • partition 2, 120 MB, Swap
  • partition 3, rest of disk, RAID auto-detect
  • partition 4, 200 MB, RAID auto-detect

The hd*1 partitions are joined via RAID-1 to make the 400 MB root filesystem.

In the RAID-5 layout, The hd*3 partitions are joined via RAID-5 to make the 700 GB RAID space.

The use of the hd*4 partitions is currently unknown. Maybe there is an emergency system stored there. Hm, unlikely:

 Dec 12 13:48:40 LUXOR kernel: md: invalid raid superblock magic on hda4
 Dec 12 13:48:40 LUXOR kernel: md: hda4 has invalid sb, not importing!
 Dec 12 13:48:40 LUXOR kernel: md: could not import hda4!

probably just unused (maybe the extra space that is not available on the Maxtor drives?)

The hd*2 partitions are activated as individual swap spaces during boot. There is a potential problem here; should one of the disks die while in use, the whole system is likely to crash because of inaccessable swap space.