Troubleshooting Windows shares (samba)
On your Windows machines, use DHCP
This may sound weird, but it solves quite a bit of issues. If you wish to have static addresses, 1 way of doing it is if your router supports static DHCP. This way your PCs/devices will get assigned always the same IP on every dhcp request
Using shell access, go to the directory that's shared, and list its permissions
- Add discussion about which file perms are recommended and how to change them.
A samba "bug" has been fixed in samba v3.0.22  To connect a password protected samba share from Vista  on a Buffalo network-attached storage series device using an older version of Samba (ie Pre v3.0.22), you need to do the following:
- Run the Local Security Policy app - secpol.msc
- Go to Local Policies | Security Options and choose the "Network
- Security: LAN Manager Authentican Level" item
- Set it to "Send LM & NLTM, use NTMLv2 session if negotiated"
If for some reason your “secpol.msc” refuses to work, you can manually change a setting in the Windows registery.
- Go in the “Execute command window” and type “regedit” and press “OK”, it will pop the Windows registery window.
- Browse the this key: “HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Lsa\” and change the value for the option “LMCompatibilityLevel” from value 3 to a value 1.
Are you using the same workgroup ?
Make sure that the workgroup you use is the same that your windows computers use:
- Defined in Windows ;ControlPanel:Network:Identification_Tab:Workgroup_field
- For a workgroup MSHOME these lines should appear in /etc/samba/smb.conf
[global] workgroup = MSHOME
from webmin: Windows Networking->Workgroup
Try adding guest access
While you may want security w/ user/passwords on your shares, enabling guest access is another way of troubleshooting if you can make it work. Be aware this will effectively disable security. 
1. Pick a directory you wish to share ie: /mnt/share and change the access permissions to make it readable and writable to everybody.
chmod 777 /mnt/share
2. Add the [share] section to /etc/samba/smb.conf This will create a free to all directory, and set the security to share. Below is a small but complete configuration file you could use.
[global] security = share workgroup = MSHOME create mode = 777 directory mode = 777 [share] comment = LinkStation Share path = /mnt/share read only = no public = yes
3. Restart Samba on the Linkstation with this command:
4. In Windows Explorer, doubleclick on Network Neighborhood, then on Entire Network, then on your workgroup (MSHOME in the case), and see if you see your LinkStation
5. Doubleclick the icon to see the share directory.
6. Navigate to the share directory.
Are file names mangled? Try setting the charset
If you find that files copied to your Samba share work fine when using Samba, but appear with garbled characters when accessed through SSH or SCP (e.g. "menú" shows up as "menÃº"), the problem is probably the charset you are using. You will need to set the unix charset variable in the global section of the smb.conf file to the correct value. For example, if you are using Latin1 in Windows, you set:
unix charset = ISO8859-1
- Samba Documentation
- http://www.samba.org/ The samba web site
- http://us4.samba.org/samba/docs/using_samba/toc.html "Using Samba", by Ts, Eckstein, and Collier-Brown (O'Reilly)
- Vista and Buffalo Terastation
- Troubleshooters.Com and T.C Linux Library Present: Samba