U-boot Default Environmental Variables and Values - Revision history

Lsuser1985: /* Restoring Default Values to U-Boot Env Vars */ determine more vlaues from u-boot source

Lsuser1985 — Sun, 13 Jan 2013 13:19:36 GMT

Restoring Default Values to U-Boot Env Vars: determine more vlaues from u-boot source

← Older revision		Revision as of 13:19, 13 January 2013
Line 443:		Line 443:
	**Add this file `xxx.h` to the u-boot source:		**Add this file `xxx.h` to the u-boot source:
	#include <config.h>		#include <config.h>
-	"~~CFG_ENV_ADDR~~" ~~CFG_ENV_ADDR~~	+	"CFG_FLASH_BASE" CFG_FLASH_BASE
		+	"CFG_FLASH_SIZE" CFG_FLASH_SIZE
	"CFG_ENV_SIZE" CFG_ENV_SIZE		"CFG_ENV_SIZE" CFG_ENV_SIZE
	"CFG_ENV_SECT_SIZE" CFG_ENV_SECT_SIZE		"CFG_ENV_SECT_SIZE" CFG_ENV_SECT_SIZE
	"CFG_ENV_OFFSET" CFG_ENV_OFFSET		"CFG_ENV_OFFSET" CFG_ENV_OFFSET
		+	"CFG_ENV_ADDR" CFG_ENV_ADDR
	:*Add this lines to the end of the Makefile (mind the Makefile syntax: the second line must star with a tab character):		:*Add this lines to the end of the Makefile (mind the Makefile syntax: the second line must star with a tab character):
	xxxxxx:		xxxxxx:
Line 453:		Line 455:
	make xxxxxx \| tail		make xxxxxx \| tail
	:This will give you something like this:		:This will give you something like this:
-	"~~CFG_ENV_ADDR~~" ((0xf8000000~~) +~~ 0x00080000 ~~- 0x10000)~~	+	"CFG_FLASH_BASE" 0xf8000000
		+	"CFG_FLASH_SIZE" 0x00080000
	"CFG_ENV_SIZE" 0x10000		"CFG_ENV_SIZE" 0x10000
	"CFG_ENV_SECT_SIZE" 0x10000		"CFG_ENV_SECT_SIZE" 0x10000
	"CFG_ENV_OFFSET" (0x00080000 - 0x10000)		"CFG_ENV_OFFSET" (0x00080000 - 0x10000)
		+	"CFG_ENV_ADDR" ((0xf8000000) + 0x00080000 - 0x10000)

	*compute the begin and end ( '''get out your "hexadecimal calculator" if your hex math skills are rusty!''' )		*compute the begin and end ( '''get out your "hexadecimal calculator" if your hex math skills are rusty!''' )

Lsuser1985: /* Restoring Default Values to U-Boot Env Vars */

Lsuser1985 — Sun, 13 Jan 2013 10:31:51 GMT

Restoring Default Values to U-Boot Env Vars

← Older revision		Revision as of 10:31, 13 January 2013
Line 442:		Line 442:
	*** If ''not'' cross-compiling, set `CROSS_COMPILE =`		*** If ''not'' cross-compiling, set `CROSS_COMPILE =`
	**Add this file `xxx.h` to the u-boot source:		**Add this file `xxx.h` to the u-boot source:
-	#include <config.h>	+	#include <config.h>
-	"CFG_ENV_ADDR" CFG_ENV_ADDR	+	"CFG_ENV_ADDR" CFG_ENV_ADDR
-	"CFG_ENV_SIZE" CFG_ENV_SIZE	+	"CFG_ENV_SIZE" CFG_ENV_SIZE
-	"CFG_ENV_SECT_SIZE" CFG_ENV_SECT_SIZE	+	"CFG_ENV_SECT_SIZE" CFG_ENV_SECT_SIZE
-	"CFG_ENV_OFFSET" CFG_ENV_OFFSET	+	"CFG_ENV_OFFSET" CFG_ENV_OFFSET
-	**Add this lines to the end of the Makefile (mind the Makefile syntax!):	+	:*Add this lines to the end of the Makefile (mind the Makefile syntax: the second line must star with a tab character):
-	xxxxxx:	+	xxxxxx:
-	$(CPP) $(CPPFLAGS) xxx.h	+	$(CPP) $(CPPFLAGS) xxx.h
-	**run:	+	:*run:
-	make xxxxxx \| tail	+	make xxxxxx \| tail
-	This will give you something like this:	+	:This will give you something like this:
-	"CFG_ENV_ADDR" ((0xf8000000) + 0x00080000 - 0x10000)	+	"CFG_ENV_ADDR" ((0xf8000000) + 0x00080000 - 0x10000)
-	"CFG_ENV_SIZE" 0x10000	+	"CFG_ENV_SIZE" 0x10000
-	"CFG_ENV_SECT_SIZE" 0x10000	+	"CFG_ENV_SECT_SIZE" 0x10000
-	"CFG_ENV_OFFSET" (0x00080000 - 0x10000)	+	"CFG_ENV_OFFSET" (0x00080000 - 0x10000)

	*compute the begin and end ( '''get out your "hexadecimal calculator" if your hex math skills are rusty!''' )		*compute the begin and end ( '''get out your "hexadecimal calculator" if your hex math skills are rusty!''' )

Lsuser1985: /* Restoring Default Values to U-Boot Env Vars */

Lsuser1985 — Sun, 13 Jan 2013 01:21:59 GMT

Restoring Default Values to U-Boot Env Vars

← Older revision		Revision as of 01:21, 13 January 2013
Line 435:		Line 435:
	#define CFG_ENV_SIZE 0x1000		#define CFG_ENV_SIZE 0x1000
	#define CFG_ENV_SECT_SIZE 0x1000		#define CFG_ENV_SECT_SIZE 0x1000
		+	*For newer versions of the u-boot source, it is more complicated to spot the valies, since there are many '#ifdefs'. Here is a help:
		+	** [[Identify your Board]] and determine which config has to be build, e.g. `buffalo_mvlswvl_6282_config` for a LS-WVL)
		+	** Run 'make <your-board>_config'.
		+	** Fix `include/config.mk`:
		+	*** One of the lines my start with `-e CPPFLAGS`: remove the `-e ` there.
		+	*** If ''not'' cross-compiling, set `CROSS_COMPILE =`
		+	**Add this file `xxx.h` to the u-boot source:
		+	#include <config.h>
		+	"CFG_ENV_ADDR" CFG_ENV_ADDR
		+	"CFG_ENV_SIZE" CFG_ENV_SIZE
		+	"CFG_ENV_SECT_SIZE" CFG_ENV_SECT_SIZE
		+	"CFG_ENV_OFFSET" CFG_ENV_OFFSET
		+	**Add this lines to the end of the Makefile (mind the Makefile syntax!):
		+	xxxxxx:
		+	$(CPP) $(CPPFLAGS) xxx.h
		+	**run:
		+	make xxxxxx \| tail
		+	This will give you something like this:
		+	"CFG_ENV_ADDR" ((0xf8000000) + 0x00080000 - 0x10000)
		+	"CFG_ENV_SIZE" 0x10000
		+	"CFG_ENV_SECT_SIZE" 0x10000
		+	"CFG_ENV_OFFSET" (0x00080000 - 0x10000)
		+
	*compute the begin and end ( '''get out your "hexadecimal calculator" if your hex math skills are rusty!''' )		*compute the begin and end ( '''get out your "hexadecimal calculator" if your hex math skills are rusty!''' )
	begin = fffff000		begin = fffff000

Lsuser1985: Added LS-WVL, Buffalo Stock Firmware 1.41

Lsuser1985 — Sat, 12 Jan 2013 22:11:55 GMT

Added LS-WVL, Buffalo Stock Firmware 1.41

← Older revision		Revision as of 22:11, 12 January 2013
Line 279:		Line 279:
	overEthAddr=no		overEthAddr=no
	usb0Mode=host		usb0Mode=host
		+
		+	== LS-WVL ==
		+	===== Buffalo Stock Firmware 1.52 =====
		+
		+	U-Boot 1.1.4 (Jul 6 2011 - 20:16:40) Marvell version: 3.5.3
		+
		+	root@LS-WVL2C9:~# nvram -c printenv
		+	1: [baudrate=115200]
		+	2: [loads_echo=0]
		+	3: [ipaddr=192.168.11.150]
		+	4: [serverip=192.168.11.1]
		+	5: [rootpath=/mnt/ARM_FS/]
		+	6: [netmask=255.255.255.0]
		+	7: [run_diag=yes]
		+	8: [stdin=serial]
		+	9: [stdout=serial]
		+	10: [stderr=serial]
		+	11: [console=console=ttyS0,115200]
		+	12: [mainlineLinux=no]
		+	13: [CASset=min]
		+	14: [enaMonExt=no]
		+	15: [enaCpuStream=no]
		+	16: [enaWrAllo=no]
		+	17: [pexMode=RC]
		+	18: [disL2Cache=no]
		+	19: [setL2CacheWT=yes]
		+	20: [disL2Prefetch=yes]
		+	21: [enaICPref=yes]
		+	22: [enaDCPref=yes]
		+	23: [sata_dma_mode=yes]
		+	24: [MALLOC_len=1]
		+	25: [bootargs_root=root=/dev/sda2 rw initrd=0x00800040,12M panic=5]
		+	26: [bootargs_end=:::DB88FXX81:eth0:none]
		+	27: [image_name=uImage]
		+	28: [buffalo_ver=BOOTVER=0.18]
		+	29: [kernel=uImage.buffalo]
		+	30: [initrd=initrd.buffalo]
		+	31: [bootcommon=setenv bootargs $console $bootargs_root $bootargs_func $bootargs_wol $buffalo_ver $mtdparts $tftpboot $nandboot; bootm 0x00100000 0x00800000]
		+	32: [tftpbootcmd=tftp 0x00100000 $kernel; tftp 0x00800000 $initrd; setenv tftpboot tftpboot=yes; run bootcommon]
		+	33: [idebootcmd=ext2load ide 0:1 0x00100000 /$kernel; ext2load ide 0:1 0x00800000 /$initrd; run bootcommon]
		+	34: [mtdids=nand0=nand_mtd]
		+	35: [mtdparts=mtdparts=nand_mtd:0x1000000(boot),0xfe800000(rootfs),0x800000(reserve)]
		+	36: [nandbootcmd=fsload 0x00100000 /$kernel; fsload 0x00800000 /$initrd; setenv nandboot nandboot=yes; run bootcommon]
		+	37: [bootcmd=for i in $bootorder; do run ${i}bootcmd; done]
		+	38: [lcd0_enable=0]
		+	39: [lcd0_params=640x480-16@60]
		+	40: [lcd0_bootargs=video-dovefb:lcd0:$(lcd0_params) clcd.lcd0_enable=$(lcd0_enable)]
		+	41: [bootdelay=3]
		+	42: [disaMvPnp=no]
		+	43: [ethmtu=1500]
		+	44: [mvPhoneConfig=mv_phone_config=dev[0]:fxs,dev[1]:fxo]
		+	45: [mvNetConfig=mv_net_config=(00:11:88:0f:xx:xx,0:1:2:3),mtu=1500]
		+	46: [usb0Mode=host]
		+	47: [nandEcc=1bit]
		+	48: [netretry=no]
		+	49: [rcvrip=169.254.100.100]
		+	50: [loadaddr=0x02000000]
		+	51: [autoload=no]
		+	52: [enaAutoRecovery=yes]
		+	53: [ethaddr=4C:E6:76:xx:xx:xx]
		+	54: [bootorder=ide]

	==TS-Pro v2==		==TS-Pro v2==

Td405 at 06:31, 27 May 2009

Td405 — Wed, 27 May 2009 06:31:42 GMT

← Older revision		Revision as of 06:31, 27 May 2009
Line 281:		Line 281:

	==TS-Pro v2==		==TS-Pro v2==
-	=====U-Boot 1.1.1 (Oct 19 2008 - 21:02:54) Marvell version: 1.12.1 - TINY ~~Stock Buffalo U-boot~~=====	+	=====U-Boot 1.1.1 (Oct 19 2008 - 21:02:54) Marvell version: 1.12.1 - TINY=====
	baudrate=115200		baudrate=115200
	loads_echo=0		loads_echo=0

Td405 at 06:30, 27 May 2009

Td405 — Wed, 27 May 2009 06:30:56 GMT

← Older revision		Revision as of 06:30, 27 May 2009
Line 279:		Line 279:
	overEthAddr=no		overEthAddr=no
	usb0Mode=host		usb0Mode=host
		+
		+	==TS-Pro v2==
		+	=====U-Boot 1.1.1 (Oct 19 2008 - 21:02:54) Marvell version: 1.12.1 - TINY Stock Buffalo U-boot=====
		+	baudrate=115200
		+	loads_echo=0
		+	ipaddr=192.168.11.150
		+	rootpath=/nfs/arm
		+	cpuName=926
		+	CASset=min
		+	MALLOC_len=4
		+	bootargs_end=:::DB88FXX81:eth0:none
		+	ethact=egiga0
		+	ethaddr=00:16:01:41:8E:33
		+	buffalo_minor_ver=BOOT_MINOR_VER=1.00
		+	ethprime=egiga0
		+	usb0Mode=host
		+	usb1Mode=host
		+	bootargs=console=ttyS0,115200 root=/dev/sda2 rw initrd=0x00800040,15M panic=5 BOOTVER=1.10
		+	serverip=192.168.11.1
		+	buffalo_ver=BOOTVER=1.01
		+	build_time=10:35:38
		+	initrd=initrd.buffalo
		+	kernel=uImage.buffalo
		+	bootargs_base=console=ttyS0,115200
		+	bootargs_root=root=/dev/sda2 rw initrd=0x00800040,15M panic=5
		+	def_tftp=tftp 0x00100000 $(kernel);tftp 0x00800000 $(initrd);setenv bootargs $(bootargs_base) $(bootargs_root) $(buffalo_ver);bootm 0x00100000 0x00800000
		+	stdin=serial
		+	stdout=serial
		+	stderr=serial
		+	enaMonExt=no
		+	enaFlashBuf=yes
		+	enaCpuStream=no
		+	bootdelay=3
		+	disaMvPnp=no
		+	overEthAddr=no
		+	force_tftp=1
		+	bootcmd=ide reset; ext2load ide 1:1 0x00100000 /$(kernel);ext2load ide 1:1 0x00800000 /$(initrd);setenv bootargs $(bootargs_base) $(bootargs_root) $(buffalo_ver);bootm 0x00100000 0x00800000
		+
		+	Environment size: 1010/4092 bytes

Jpg at 06:51, 2 April 2009

Jpg — Thu, 02 Apr 2009 06:51:34 GMT

← Older revision		Revision as of 06:51, 2 April 2009
Line 1:		Line 1:
-	{{Template:Articles\|UBoot\|Linkstation Variants\|Projects\|LS1\|HG\|HS\|LSPro\|KuroboxPro}}	+	{{Template:Articles\|UBoot\|Linkstation Variants\|Projects\|LS1\|HG\|HS\|LSPro\|KuroboxPro\|LSQuad}}
	[[Category:LS-WTGL/R1]]		[[Category:LS-WTGL/R1]]

Jpg at 00:59, 2 April 2009

Jpg — Thu, 02 Apr 2009 00:59:49 GMT

← Older revision		Revision as of 00:59, 2 April 2009
Line 243:		Line 243:
	=====U-Boot 1.1.1 (Feb 22 2008 - 18:48:54) Marvell version: 1.12.1 - TINY=====		=====U-Boot 1.1.1 (Feb 22 2008 - 18:48:54) Marvell version: 1.12.1 - TINY=====
	[[LS Mini: Serial Port Output - U-Boot#Environment]]		[[LS Mini: Serial Port Output - U-Boot#Environment]]
		+
		+	==LS Quad LS-QL/R5==
		+	=====Buffalo Stock Firmware 1.05=====
		+
		+	bootargs=$(bootargs_base) $(bootargs_root)
		+	baudrate=115200
		+	loads_echo=0
		+	ipaddr=192.168.11.150
		+	serverip=192.168.11.1
		+	rootpath=/nfs/arm
		+	cpuName=926
		+	CASset=min
		+	MALLOC_len=4
		+	bootargs_end=:::DB88FXX81:eth0:none
		+	ethact=egiga0
		+	ethaddr=00:1D:73:A5:35:77
		+	stdin=serial
		+	stdout=serial
		+	stderr=serial
		+	enaMonExt=no
		+	enaFlashBuf=yes
		+	enaCpuStream=no
		+	ethprime=egiga0
		+	buffalo_ver=BOOTVER=1.24
		+	buffalo_minor_ver=BOOT_MINOR_VER=1.00
		+	build_time=15:36:59
		+	initrd=initrd.buffalo
		+	kernel=uImage.buffalo
		+	bootargs_base=console=ttyS0,115200
		+	bootargs_root=root=/dev/sda2 rw initrd=0x00800040,32M panic=5
		+	bootcmd=ide reset; ext2load ide 1:1 0x00100000 /$(kernel); ext2load ide 1:1 0x00800000 /$(initrd); setenv bootargs $(bootargs_base) $(bootargs_root) $(bootargs_func) $(bootargs_debug) $(buffalo_ver); bootm 0x00100000 0x00800000
		+	def_tftp=tftp 0x00100000 $(kernel); tftp 0x00800000 $(initrd); setenv bootargs $(bootargs_base) $(bootargs_root) $(buffalo_ver) tftpboot=yes; bootm 0x00100000 0x00800000
		+	bootdelay=3
		+	disaMvPnp=no
		+	overEthAddr=no
		+	usb0Mode=host
		+

	==Custom UBoot Builds==		==Custom UBoot Builds==

Jpg at 00:39, 2 April 2009

Jpg — Thu, 02 Apr 2009 00:39:59 GMT

← Older revision		Revision as of 00:39, 2 April 2009
Line 8:		Line 8:
	#the date of build and		#the date of build and
	#all stock/standard env vars.		#all stock/standard env vars.
-	The version and date can be found in U-boot's boot messages via [[NetCat-A_UBoot-Friendly_Network_Utility\|netcat]] or a serial terminal (if you have fitted a cable to your box's [[Serial_port]]). The values can be found by issuing the command "printenv" while in U-boot, or the command "nvram -c printenv" whilst in EM etc.	+	The version and date can be found in U-boot's boot messages via [[NetCat-A_UBoot-Friendly_Network_Utility\|netcat]] or a serial terminal (if you have fitted a cable to your box's [[Serial_port]]). The values can be found by issuing the command "printenv" while in U-boot, or the command "nvram -c printenv" whilst in EM etc. It is also possible using the fw_printenv command available as part of the uboot-envtools package in Debian (assuming you haven't changed the default uboot environment of course).

	==LS1==		==LS1==

Laitr Keiows: /* LS Mini LS-WSGL/R1 */

Laitr Keiows — Mon, 29 Sep 2008 07:40:26 GMT

LS Mini LS-WSGL/R1

← Older revision		Revision as of 07:40, 29 September 2008
Line 239:		Line 239:
	ethact=egiga0		ethact=egiga0
	ethaddr=re:mo:ve:dt:hi:s!		ethaddr=re:mo:ve:dt:hi:s!
		+
		+	==LS Mini LS-WSGL/R1==
		+	=====U-Boot 1.1.1 (Feb 22 2008 - 18:48:54) Marvell version: 1.12.1 - TINY=====
		+	[[LS Mini: Serial Port Output - U-Boot#Environment]]

	==Custom UBoot Builds==		==Custom UBoot Builds==