U-boot Default Environmental Variables and Values
From NAS-Central Buffalo - The Linkstation Wiki
Revision as of 04:45, 2 March 2008 by Davy gravy (Talk | contribs)
Contents |
Reference Page for U-boot Env Vars & Values
Please add only stock or standard values from a U-boot version supplied by Buffalo or by a developer associated w/ the Wiki, and no custom values, except in the place at the end. Please list:
- source of U-boot (Buffalo, wiki, foonas)
- the version
- the date of build and
- all stock/standard env vars.
The version and date can be found in U-boot's boot messages via netcat or a serial terminal (if you have fitted a cable to your box's Serial_port). The values can be found by issuing the command "printenv" while in U-boot, or the command "nvram -c printenv" whilst in EM etc.
LS1
LS2
LS-HG
U-Boot 1.1.4 LiSt 2.1.0 (Nov 15 2006 - 18:03:28) LinkStation HG / KuroBox HG
version & date above, made by kuroguy
values: to be listed...
U-Boot 1.2.0 (Apr 10 2007 - 19:13:32) LinkStation HG / KuroBox HG
version and date above, made by bitbake/timtimred - for foonas-em on a KuroHG
bootargs=root=/dev/sda1 netconsole=6666@192.168.11.150/,@192.168.11.149/ rtc-rs5c372.probe=0,0x32
bootcmd=run bootcmd1
nfsboot=bootp;run nfsargs;bootm
bootdelay=10
baudrate=57600
autoload=no
stdin=nc
stdout=nc
stderr=nc
ipaddr=192.168.11.150
netmask=255.255.255.0
serverip=192.168.11.149
ncip=192.168.11.149
netretry=no
nc=setenv stdin nc;setenv stdout nc;setenv stderr nc
ser=setenv stdin serial;setenv stdout serial;setenv stderr serial
ldaddr=800000
hdpart=0:1
hdload=echo Loading ${hdpart}:${hdfile};ext2load ide ${hdpart} ${ldaddr} ${hdfile};ext2load ide ${hdpart} 7f0000 boot/kuroboxHG.dtb
boothd=setenv bootargs root=/dev/sda1 netconsole=6666@192.168.11.150/,@192.168.11.149/ rtc-rs5c372.probe=0,0x32
hdboot=run hdload boothd
flboot=setenv bootargs root=/dev/hda1;bootm ffc00000
emboot=setenv bootargs root=/dev/ram0;bootm ffc00000
nfsargs=setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off
bootretry=30
bootcmd1=run hdboot;run flboot
bootcmd2=run flboot
bootcmd3=run emboot
writeng=protect off fff70000 fff7ffff;era fff70000 fff7ffff;mw.l 800000 4e474e47 1;cp.b 800000 fff70000 4
writeok=protect off fff70000 fff7ffff;era fff70000 fff7ffff;mw.l 800000 4f4b4f4b 1;cp.b 800000 fff70000 4
ubpart=0:1
ubfile=share/u-boot/u-boot-hg.flash.bin
ubload=echo Loading ${ubpart}:${ubfile};ext2load ide ${ubpart} ${ldaddr} ${ubfile}
ubsaddr=fff00000
ubeaddr=fff2ffff
ubflash=protect off ${ubsaddr} ${ubeaddr};era ${ubsaddr} ${ubeaddr};cp.b ${ldaddr} ${ubsaddr} ${filesize};cmp.b ${ldaddr} ${ubsaddr} ${filesize}
upgrade=run ubload ubflash
ethact=RTL8169#0
hdfile=boot/uImage
foofl1=cp.b FFC00000 800000 2FFFFF;cp.b fff80000 AFFFFF 7E887
foofl2=setenv bootargs netconsole=6666@192.168.11.150/,@192.168.11.149/ rtc-rs5c372.probe=0,0x32 root=/dev/ram0 rw;bootm ${ldaddr} - FFFFF743
fooflboot=run foofl1 foofl2
Environment size: 1895/65532 bytes
LS-Pro v1
U-Boot 1.1.1 (Jun 12 2006 - 10:32:00) Marvell version: 1.10.8 Stock Buffalo U-boot
baudrate=115200 loads_echo=0 ipaddr=192.168.11.150 rootpath=/nfs/arm cpuName=926 CASset=min MALLOC_len=4 bootargs_end=:::DB88FXX81:eth0:none ethact=egiga0 ethaddr=00:16:01:41:8E:33 buffalo_minor_ver=BOOT_MINOR_VER=1.00 ethprime=egiga0 usb0Mode=host usb1Mode=host bootargs=console=ttyS0,115200 root=/dev/sda2 rw initrd=0x00800040,15M panic=5 BOOTVER=1.10 serverip=192.168.11.1 buffalo_ver=BOOTVER=1.01 build_time=10:35:38 initrd=initrd.buffalo kernel=uImage.buffalo bootargs_base=console=ttyS0,115200 bootargs_root=root=/dev/sda2 rw initrd=0x00800040,15M panic=5 def_tftp=tftp 0x00100000 $(kernel);tftp 0x00800000 $(initrd);setenv bootargs $(bootargs_base) $(bootargs_root) $(buffalo_ver);bootm 0x00100000 0x00800000 stdin=serial stdout=serial stderr=serial enaMonExt=no enaFlashBuf=yes enaCpuStream=no bootdelay=3 disaMvPnp=no overEthAddr=no force_tftp=1 bootcmd=tftp 0x00100000 $(kernel);tftp 0x00800000 $(initrd);setenv bootargs $(bootargs_base) $(bootargs_root) $(buffalo_ver);bootm 0x00100000 0x00800000 Environment size: 1010/4092 bytes
LS-Pro v2
U-Boot 1.1.1 (Apr 18 2007 - 18:35:44) Marvell version: 1.12.1 - TINY
bootargs=$(bootargs_base) $(bootargs_root) baudrate=115200 loads_echo=0 rootpath=/nfs/arm cpuName=926 CASset=min MALLOC_len=4 bootargs_end=:::DB88FXX81:eth0:none ethact=egiga0 ethaddr=00:16:01:41:4E:2B filesize=40000 fileaddr=100000 ipaddr=192.168.11.150 serverip=192.168.11.149 stdin=serial stdout=serial stderr=serial enaMonExt=no enaFlashBuf=yes enaCpuStream=no ethprime=egiga0 buffalo_ver=BOOTVER=1.10 buffalo_minor_ver=BOOT_MINOR_VER=1.00 build_time=18:35:39 initrd=initrd.buffalo kernel=uImage.buffalo bootargs_base=console=ttyS0,115200 bootargs_root=root=/dev/sda2 rw initrd=0x00800040,15M panic=5 def_tftp=tftp 0x00100000 $(kernel);tftp 0x00800000 $(initrd);setenv bootargs $(bootargs_base) $(bootargs_root) $(buffalo_ver) tftpboot=yes;bootm 0x00100000 0x00800000 bootdelay=3 disaMvPnp=no overEthAddr=no usb0Mode=host usb1Mode=host force_tftp=1 bootcmd=tftp 0x00100000 $(kernel);tftp 0x00800000 $(initrd);setenv bootargs $(bootargs_base) $(bootargs_root) $(buffalo_ver) tftpboot=yes;bootm 0x00100000 0x00800000 Environment size: 1019/4092 bytes
KuroPro
U-Boot 1.1.1 (Apr 10 2007 - 18:10:08) Marvell version: 1.12.1 - TINY
baudrate=115200 loads_echo=0 ipaddr=192.168.11.150 serverip=192.168.11.1 rootpath=/nfs/arm cpuName=926 CASset=min MALLOC_len=4 bootargs_end=:::DB88FXX81:eth0:none ethact=egiga0 buffalo_ver=BOOTVER=1.091 build_time=18:10:02 initrd=initrd.buffalo kernel=uImage.buffalo bootargs_base=console=ttyS0,115200 bootargs_root=root=/dev/mtdblock2 rw panic=5 bootargs=$(bootargs_base) $(bootargs_root) $(buffalo_ver) nand_uImage_offset=20000 default_kernel_addr=0x00100000 default_initrd_addr=0x02000000 bootcmd=nboot $(default_kernel_addr) 0 $(nand_uImage_offset) ;setenv bootargs $(bootargs_base) $(bootargs_root) $(buffalo_ver); bootm $(default_kernel_addr) def_tftp=tftp $(default_kernel_addr) $(kernel); tftp $(default_initrd_addr) $(initrd); setenv bootargs $(bootargs_base) $(bootargs_root) rw initrd=0x02000040,20M panic=5 $(buffalo_ver); bootm $(default_kernel_addr) $(default_initrd_addr) nand_boot=yes ethaddr=00:16:01:A4:E5:5A stdin=serial stdout=serial stderr=serial enaMonExt=no enaFlashBuf=yes enaCpuStream=no ethprime=egiga0 bootdelay=3 disaMvPnp=no overEthAddr=no usb0Mode=host usb1Mode=host Environment size: 1099/4092 bytes
Custom UBoot Builds
UBoot build from buff109 GPL sources
U-Boot 1.1.1 (Feb 27 2008 - 22:04:35) D_G's BuffNASCentral Marvell version: 1.12.1 - TINY
bootargs=$(bootargs_base) $(bootargs_root) baudrate=115200 loads_echo=0 rootpath=/nfs/arm cpuName=926 CASset=min MALLOC_len=4 bootargs_end=:::DB88FXX81:eth0:none ethact=egiga0 ethaddr=00:16:01:41:4E:2B buffalo_minor_ver=BOOT_MINOR_VER=1.00 filesize=3c010 fileaddr=100000 ipaddr=192.168.11.150 serverip=192.168.11.149 buffalo_ver=BOOTVER=1.09 build_time=22:04:27 initrd=initrd.buffalo kernel=uImage.buffalo bootargs_base=console=ttyS0,115200 bootargs_root=root=/dev/sda2 rw initrd=0x00800040,15M panic=5 def_tftp=tftp 0x00100000 $(kernel);tftp 0x00800000 $(initrd);setenv bootargs $(bootargs_base) $(bootargs_root) $(buffalo_ver) tftpboot=yes;bootm 0x0010000 stdin=serial stdout=serial stderr=serial enaMonExt=no enaFlashBuf=yes enaCpuStream=no ethprime=egiga0 bootdelay=3 disaMvPnp=no overEthAddr=no usb0Mode=host usb1Mode=host force_tftp=1 bootcmd=tftp 0x00100000 $(kernel);tftp 0x00800000 $(initrd);setenv bootargs $(bootargs_base) $(bootargs_root) $(buffalo_ver) tftpboot=yes;bootm 0x00100000 Environment size: 1130/4092 bytes
Categories: All Pages | Howto | UBoot | Linkstation Variants | Projects | LS1 | HG | HS | LSPro | KuroboxPro
