Difference between revisions of "Use a cheap phone sync cable with the serial port"

From NAS-Central Buffalo - The Linkstation Wiki
Jump to: navigation, search
(Project of creating ready2use serial cables)
(Project of creating ready2use serial cables)
Line 28: Line 28:
* mesterS
* mesterS
* Juano
* Juano
* BobTheBob
* ?
* ?

Revision as of 09:33, 21 October 2007

Project of creating ready2use serial cables

Anyone who wants a cable please add his name to the lists below.

List of developers who want a prebuilt serial cable:

  • georg
  • jonli447
  • mindbender
  •  ?

List of kurobox.com-contest winners that will get a prebuilt serial cable:

  • russk
  • tampakuro/kuroguy
  • lyakh

Revogear does not respond to any mails anymore, so waite decided to use the donations to buy LS Pros for these guys instead.

List of user who want a prebuilt serial cable:

  • khisanth
  • cakalapati
  • MichaelWeiser
  • mesterS
  • Juano
  • BobTheBob
  •  ?

Here some pictures from the build-process (mindbender had fun with it)
Serial cables LS Pro some cables.JPG

I opened all FutureDial Cables to check if all cables used the same color-coding + Profilic-Chip:

Profilic chip check1.JPG
Profilic chip check2.JPG

Prebuilt cables will use a heat-shrink-tube to make the cables more stable.

Four finished cables.JPG

What do i need?

We organized some futuredial phone sync cables mentioned at http://www.nslu2-linux.org/wiki/HowTo/AddASerialPort Section "USB-Connection". These phone sync cables are quite cheap at ebay. you can buy any other cable mentioned at that wikipage...the only difference will be the color coding of the cables.
OR: buy some from here: http://cgi.ebay.de/PolarLink-USB-Datenkabel-Siemens-C25_W0QQitemZ220086930396QQihZ012QQcategoryZ111305QQrdZ1QQssPageNameZWD1VQQcmdZViewItem here is the pinout:
Polarlink cable profilicchip pinout.JPG
Quotation from http://www.nslu2-linux.org/wiki/HowTo/AddASerialPort:
Most of the cheap cables are based on a Prolific PL2303 chipset (PL2303 datasheet ) which is supported under Windows (Driver Download) and Linux. A third party Nokia data cable for a 8000 series phone has been used with no problems. A data cable from the Siemens C25/35/45 works too. The cables from the old models (i.e. C25) costs a 2..3$.
Quotation end

Comment: Find many more pinouts at http://www.nslu2-linux.org/wiki/HowTo/AddASerialPort

What to check first

Open the dongle in the middle of the cable to check if the profilic chip is used. You need to check the color coding of the wires. Best would be to just leave the dongle open. In my example here we have the color coding for the FutureDial-Cables. If you have a different one check http://www.nslu2-linux.org/wiki/HowTo/AddASerialPort for the color coding.

Profilic usb-serial chip.JPG

Open the phone connector of the cable

Phone connector.JPG
you can slide out all the cables ends out of the connector. Use flat nose pliers.

Prepare the phone sync cable

Serial cable LS Pro wires1.JPG
Serial cable LS Pro wires2.JPG

In this picture: Green is GND, Yellow is RX (as in "data entering the LSPro") and Orange is TX. The not connected terminal is VCC.