User:Kuroguy

From NAS-Central Buffalo - The Linkstation Wiki

(Difference between revisions)
Jump to: navigation, search
Line 14: Line 14:
[[Image:DSC 1046.JPG|left|thumb|640px|The completed chassis with the wood frame. still need to sand and round over the edges of the wood.]]
[[Image:DSC 1046.JPG|left|thumb|640px|The completed chassis with the wood frame. still need to sand and round over the edges of the wood.]]
 +
[[Image:DSC 1053.JPG|left|thumb|640px|The completed chassis with the wood frame and mostly polished panel. still need to do something to finish the wood.]]
 +
[[Image:DSC 1055.JPG|left|thumb|640px|you can see the layout of the major components from the bottom and all those tapped holes in the panel. just need to start installing components now.]]
-
 
+
[[Image:DSC 1046.JPG|left|thumb|640px|The completed chassis with the wood frame. still need to sand and round over the edges of the wood.]]
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
 
+
-
<br>
+
-
==Mini ITX Box==
+
-
Here it is, my new Mini ITX box. I couldn't find a case I liked so I decided to make my own.
+
-
This box has dual hard disks, a satallite card, a DVD rom drive, and a custom 2x16 red LCD and IR receiver module (homebrew). Here are some pics:
+
-
[[Image:DSC_0843.JPG|left|thumb|640px|The LCD module from sparkfun.com and the USB to ttl adapter from a phone data cable]]
+
-
 
+
-
[[Image:Mini-itx_package.jpg|left|thumb|640px|The hardware block assembled without a case or chassis.]]
+
-
 
+
-
[[Image:Front top.jpg|left|thumb|640px|The chassis with the hard disks installed.]]
+
-
 
+
-
[[Image:Dvd carrier1.jpg|left|thumb|640px|The DVD carrier holds it in position with respect to the front panel.]]
+
-
 
+
-
[[Image:Dvd carrier2.jpg|left|thumb|640px|Another view of the DVD carrier.]]
+
-
 
+
-
[[Image:Front top dvd.jpg|left|thumb|640px|Front top view with ide cabless.]]
+
-
 
+
-
[[Image:Front view dvd.jpg|left|thumb|640px|Front view with dvd and ide cables.]]
+
-
 
+
-
[[Image:Side view dvd.jpg|left|thumb|640px|Side view with dvd and ide cabless.]]
+
-
 
+
-
[[Image:Chassis front side dvd.jpg|left|thumb|640px|Front side view with dvd and ide cables.]]
+
-
 
+
-
[[Image:Everything_but_the_lcd.jpg|left|thumb|640px|Everything but the LCD now.]]
+
-
 
+
-
[[Image:Tight wiring.jpg|left|thumb|640px|this little space required a custom wiring harness.]]
+
-
 
+
-
[[Image:Side done.jpg|left|thumb|640px|Here is a side view with the top still off. you can see the cable for the lcd just below the DVD.]]
+
-
 
+
-
[[Image:Mini itx back.jpg|left|thumb|640px|Here's one of the back showing the cooling air intake slots as well as the other connections to the box. The plug on the upper left is power and the two above the DVI are for LNB input and passthrough for the satellite card.]]
+
-
 
+
-
[[Image:Top side done.jpg|left|thumb|640px|and one last view with the top off.]]
+
-
 
+
-
[[Image:itx15.jpg|left|thumb|640px|one with the LCD working.]]
+
-
 
+
-
[[Image:DSC_0883.JPG|left|thumb|640px|...and here it is with two coats of Boiled Linseed Oil sitting in my living room.]]
+

Revision as of 17:09, 22 August 2007

Tube Amp

Building a 832 push pull amp from scratch. here's some pictures:

Here's the layout of the major components on paper. Next I'll start cutting the aluminum panel.
The 832a dual beam pentode with the 12at7 dual triode (first stage) next to it.
Just starting drilling on the chassis The panel came with those deep scratches in it. If I can't get them out I'll paint the panel black.
The chassis with the transformers and terminals mounted. check out the finish on the panel.
The completed chassis. Time to start cutting some wood.
The completed chassis with the wood frame. still need to sand and round over the edges of the wood.
The completed chassis with the wood frame and mostly polished panel. still need to do something to finish the wood.
you can see the layout of the major components from the bottom and all those tapped holes in the panel. just need to start installing components now.
The completed chassis with the wood frame. still need to sand and round over the edges of the wood.
Retrieved from "http://buffalo.nas-central.org/wiki/User:Kuroguy"
Personal tools