Difference between revisions of "User talk:Ramuk"

From NAS-Central Buffalo - The Linkstation Wiki
Jump to: navigation, search
m
 
m (Maybe not so much)
 
(45 intermediate revisions by 4 users not shown)
Line 1: Line 1:
=My Install=
+
=help with manual install=
 +
You seem to be the Freelink manual install expert.  I'm using your page and have all of the images in partitions on my hard drive.  Can't get it to boot from it.  I've changed the Uboot variables per the isntructions but it seems to find a uImage file that doesn't match what I saved to the boot partitiion.  And whatever it finds has a bad CRC.  Any suggestions?
  
==Get the archive== [http://downloads.linkstationwiki.net/freelink/freelink_powerpc-hdhglan-1.11.zip
+
<pre>
freelink_powerpc-hdhglan-1.11.zip]
+
Reset IDE:
==Flash The [[The LinkStation firmware flasher]]==
+
Marvell Serial ATA Adapter
==Login to the machine and get started==
+
Integrated Sata device found
# telnet 192.168.1.XXX
+
  Device 0: OK
Debian GNU/Linux 3.1 %h
+
Model: MAXTOR STM3320620AS                    Firm: 3.AAE    Ser#:            5QF57K4R
root@LinkStation:/#
+
            Type: Hard Disk
===Change the root password===
+
            Supports 48-bit addressing
passwd root
+
            Capacity: 305245.3 MB = 298.0 GB (625142448 x 512)
===Get and update with apt-get===
+
 
apt-get update
+
Using device ide0, partition 1
apt-get install ssh
+
 
apt-get upgrade
+
Loading from block device ide device 0, partition 1: Name: hda1
apt-get install samba smbfs
+
   Type: U-Boot File:/boot/uImage
apt-get install webmin webmin-core webmin-cpan webmin-inetd webmin-logrotate webmin-firewall
+
 
apt-get install webmin-samba
+
0 bytes read
rm /etc/rc2.d/S05utelnetd
+
<<stop_sound>>
===[[Freeing up space on hda1]]===  
+
## Booting image at 00100000 ...
cp -Rdp /home /mnt
+
  Image Name:  Linux-2.6.12.6-arm1
rm -R  /home
+
  Created:      2007-04-10 13:45:13 UTC
ln -s /mnt/home /home
+
  Image
cp -Rdp /usr /mnt
+
Type:  ARM Linux Kernel Image (uncompressed)
rm -R   /usr
+
  Data Size:    1736548 Bytes 1.7 MB
ln -s /mnt/usr /usr
+
  Load Address: 00008000
  cp -Rdp /var /mnt
+
  Entry Point: 00008000
rm -R  /var
+
  Verifying Checksum ... Bad Data CRC
ln -s /mnt/var /var
+
bootm fail.
===[[Correct the system time and setup Network Time Protocol (NTP)]]===
+
<<system_not_found>>
tzconfig
+
Using egiga0 device
apt-get install ntp ntp-simple ntp-server ntpdate
+
TFTP from server 192.168.161.14; our IP address is 192.168.161.32
===[[Upgrade to the 2.6-kernel (ppc only)]]===
+
Filename 'uImage.buffalo'.
wget http://hvkls.dyndns.org/downloads/latest-webinstaller.tar.gz
+
Load address: 0x100000
tar -C / -xvzf latest-webinstaller.tar.gz
+
</pre>
  /usr/local/sbin/webinstaller-kernelinst.sh
+
[[User:Mramsey|Mramsey]] 23:53, 24 March 2008 (CDT)
reboot
+
 
===Install an [[Encrypted Filespace with EncFS]]===
+
== Maybe not so much ==
  wget  http://hvkls.dyndns.org/downloads/fuse_2.5.3-binaries-ppc.tar.gz
+
 
  tar -C / -xvzf fuse_2.5.3-binaries-ppc.tar.gz
+
Maybe not so much, you started a discussion in the forum
apt-get install encfs
+
http://buffalo.nas-central.org/forums/viewtopic.php?f=51&t=6881
===[[Macintosh related configuration, netatalk, mt-daapd]]===
+
 
wget http://hvkls.dyndns.org/downloads/libid3tag_0.15.1b-binaries-ppc.tar.gz
+
I figured I'd reference it hereI hope you've got it working now.
wget http://hvkls.dyndns.org/downloads/mtdaapd_0.2.4-binaries-ppc.tar.gz
+
 
tar -C / -xvzf libid3tag_0.15.1b-binaries-ppc.tar.gz
+
[[User:Ramuk|Ramuk]] 23:27, 27 March 2008 (CDT)
tar -C / -xvzf mtdaapd_0.2.4-binaries-ppc.tar.gz
+
mv /etc/mt-daapd.SAMPLE /etc/mt-daapd
+
Then edit /etc/mt-daapd/*. When done,
+
/etc/init.d/mt-daapd start
+
===[[USB Palm OS Device as an LCD Display]]===
+
apt-get install lcdproc
+
apt-get remove lcdproc
+
wget http://lcdproc.omnipotent.net/download/lcdproc-0.4.5.tar.gz
+
tar -xvzf lcdproc-0.4.5.tar.gz
+
cd lcdproc-0.4.5
+
  ./configure
+
make
+
make install
+
===Install [[Ipkg on the Linkstation (for end-users)]]
+
wget http://downloads.linkstationwiki.net/powerpc-hdhlan/powerpc-hdhlan-ipkg-0.99.153-1.tgz
+
tar -C / -xvzf powerpc-hdhlan-ipkg-0.99.153-1.tgz
+
===[[XBMC - Using Xbox Media Center with the LinkStation]]===
+
ipkg install ccxstream
+

Latest revision as of 04:27, 28 March 2008

help with manual install

You seem to be the Freelink manual install expert. I'm using your page and have all of the images in partitions on my hard drive. Can't get it to boot from it. I've changed the Uboot variables per the isntructions but it seems to find a uImage file that doesn't match what I saved to the boot partitiion. And whatever it finds has a bad CRC. Any suggestions?

Reset IDE:
Marvell Serial ATA Adapter
Integrated Sata device found
  Device 0: OK
Model: MAXTOR STM3320620AS                    Firm: 3.AAE    Ser#:             5QF57K4R
            Type: Hard Disk
            Supports 48-bit addressing
            Capacity: 305245.3 MB = 298.0 GB (625142448 x 512)

Using device ide0, partition 1

Loading from block device ide device 0, partition 1: Name: hda1
  Type: U-Boot  File:/boot/uImage

0 bytes read
<<stop_sound>>
## Booting image at 00100000 ...
   Image Name:   Linux-2.6.12.6-arm1
   Created:      2007-04-10  13:45:13 UTC
   Image 
Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    1736548 Bytes =  1.7 MB
   Load Address: 00008000
   Entry Point:  00008000
   Verifying Checksum ... Bad Data CRC
bootm fail.
<<system_not_found>>
Using egiga0 device
TFTP from server 192.168.161.14; our IP address is 192.168.161.32
Filename 'uImage.buffalo'.
Load address: 0x100000

Mramsey 23:53, 24 March 2008 (CDT)

Maybe not so much

Maybe not so much, you started a discussion in the forum http://buffalo.nas-central.org/forums/viewtopic.php?f=51&t=6881

I figured I'd reference it here. I hope you've got it working now.

Ramuk 23:27, 27 March 2008 (CDT)