help with manual install
You seem to be the Freelink manual install expert. I'm using your page and have all of the images in partitions on my hard drive. Can't get it to boot from it. I've changed the Uboot variables per the isntructions but it seems to find a uImage file that doesn't match what I saved to the boot partitiion. And whatever it finds has a bad CRC. Any suggestions?
Reset IDE: Marvell Serial ATA Adapter Integrated Sata device found Device 0: OK Model: MAXTOR STM3320620AS Firm: 3.AAE Ser#: 5QF57K4R Type: Hard Disk Supports 48-bit addressing Capacity: 305245.3 MB = 298.0 GB (625142448 x 512) Using device ide0, partition 1 Loading from block device ide device 0, partition 1: Name: hda1 Type: U-Boot File:/boot/uImage 0 bytes read <<stop_sound>> ## Booting image at 00100000 ... Image Name: Linux-188.8.131.52-arm1 Created: 2007-04-10 13:45:13 UTC Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 1736548 Bytes = 1.7 MB Load Address: 00008000 Entry Point: 00008000 Verifying Checksum ... Bad Data CRC bootm fail. <<system_not_found>> Using egiga0 device TFTP from server 192.168.161.14; our IP address is 192.168.161.32 Filename 'uImage.buffalo'. Load address: 0x100000
Mramsey 23:53, 24 March 2008 (CDT)
Maybe not so much
Maybe not so much, you started a discussion in the forum http://buffalo.nas-central.org/forums/viewtopic.php?f=51&t=6881
I figured I'd reference it here. I hope you've got it working now.